ata1.00: failed to enable AA (error_mask=0x1)

From: Milen Kidane
Date: Fri May 24 2013 - 19:51:22 EST


Hello,

Please advise if you can help me with bellow problem. I receive the
following messages on boot:

May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: ATA-8: ST500LM012 HN-M500MBB,
2AR10001, max UDMA/100
May 25 01:52:37 Leny kernel: ata1.00: 976773168 sectors, multi 0: LBA48
NCQ (depth 31/32)
May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: configured for UDMA/100
May 25 01:52:37 Leny kernel: scsi 0:0:0:0: Direct-Access ATA
ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5

lspci shows the following:

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
Subsystem: Lenovo Device 3975
Kernel driver in use: ahci
Kernel modules: ahci

I have read topics varying from "it's nothing" to "your HDD will fail
soon", so I really do not know what is this.

Please cc me in the reply if you can. Thank you very much.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/