--- dmesg_3.9.0-rc8-next20130424-3-iniza-small.txt	2013-04-24 23:08:38.301137555 +0200
+++ dmesg_3.9.0-rc8-next20130424-3-iniza-small_after-suspend-resume.txt	2013-04-24 23:09:53.675023185 +0200
@@ -1684,3 +1684,178 @@
 [   33.388683] wlan0: associated
 [   33.388771] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
 [   34.770920] usb 1-1.4: usb auto-suspend, wakeup 0
+[   76.653221] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
+[   76.662931] cfg80211: Calling CRDA to update world regulatory domain
+[   76.668487] cfg80211: World regulatory domain updated:
+[   76.668493] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
+[   76.668497] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[   76.668500] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[   76.668503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[   76.668505] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[   76.668508] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[   78.475652] PM: Syncing filesystems ... done.
+[   78.477727] PM: Preparing system for mem sleep
+[   78.478079] Freezing user space processes ... (elapsed 0.02 seconds) done.
+[   78.498484] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
+[   78.514489] PM: Entering mem sleep
+[   78.514569] Suspending console(s) (use no_console_suspend to debug)
+[   78.515010] usb 2-1.5: unlink qh1-0e01/ffff880090ef4bc0 start 0 [1/2 us]
+[   78.515030] usb 1-1.2: unlink qh8-0e01/ffff88008facde40 start 3 [1/2 us]
+[   78.515038] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
+[   78.515089] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[   78.517212] usb 1-1.2: usb suspend, wakeup 0
+[   78.517245] hub 1-1:1.0: hub_suspend
+[   78.517259] usb 1-1: unlink qh256-0001/ffff88011860a840 start 1 [1/0 us]
+[   78.517641] usb 2-1: clear tt buffer port 5, a3 ep2 t04048d80
+[   78.517685] usb 2-1.5: usb suspend, wakeup 0
+[   78.517756] hub 2-1:1.0: hub_suspend
+[   78.517762] usb 2-1: unlink qh256-0001/ffff88011860a740 start 1 [1/0 us]
+[   78.517973] sd 1:0:0:0: [sdb] Stopping disk
+[   78.519427] usb 1-1: usb suspend, wakeup 0
+[   78.519949] usb 2-1: usb suspend, wakeup 0
+[   78.529936] usb usb4: usb auto-resume
+[   78.529952] hub 4-0:1.0: hub_resume
+[   78.529955] usb usb3: usb auto-resume
+[   78.529956] hub 2-0:1.0: hub_suspend
+[   78.529962] usb usb2: bus suspend, wakeup 0
+[   78.529964] ehci-pci 0000:00:1d.0: suspend root hub
+[   78.529977] hub 3-0:1.0: hub_resume
+[   78.529992] hub 4-0:1.0: hub_suspend
+[   78.529994] hub 3-0:1.0: hub_suspend
+[   78.529996] usb usb4: bus suspend, wakeup 0
+[   78.529997] usb usb3: bus suspend, wakeup 0
+[   78.530060] hub 1-0:1.0: hub_suspend
+[   78.530063] usb usb1: bus suspend, wakeup 0
+[   78.530064] ehci-pci 0000:00:1a.0: suspend root hub
+[   78.530418] mei_me 0000:00:16.0: suspend
+[   78.592484] sd 0:0:0:0: [sda] Stopping disk
+[   79.198049] PM: suspend of devices complete after 683.662 msecs
+[   79.198291] PM: late suspend of devices complete after 0.239 msecs
+[   79.198549] xhci_hcd 0000:03:00.0: wakeup: 1
+[   79.213877] xhci_hcd 0000:03:00.0: --> PCI D3hot
+[   79.213961] r8169 0000:02:00.0: System wakeup enabled by ACPI
+[   79.245935] ehci-pci 0000:00:1d.0: wakeup: 1
+[   79.261817] ehci-pci 0000:00:1d.0: --> PCI D3hot
+[   79.262000] ehci-pci 0000:00:1a.0: wakeup: 1
+[   79.277806] ehci-pci 0000:00:1a.0: --> PCI D3hot
+[   79.293848] PM: noirq suspend of devices complete after 95.623 msecs
+[   79.294114] ACPI: Preparing to enter system sleep state S3
+[   79.295371] PM: Saving platform NVS memory
+[   79.297137] Disabling non-boot CPUs ...
+[   79.298852] smpboot: CPU 1 is now offline
+[   79.401721] smpboot: CPU 2 is now offline
+[   79.402709] Broke affinity for irq 1
+[   79.505647] smpboot: CPU 3 is now offline
+[   79.507742] ACPI: Low-level resume complete
+[   79.507796] PM: Restoring platform NVS memory
+[   79.509081] Enabling non-boot CPUs ...
+[   79.510162] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[   79.521169] Disabled fast string operations
+[   79.523586] Intel pstate controlling: cpu 1
+[   79.523682] CPU1 is up
+[   79.524754] smpboot: Booting Node 0 Processor 2 APIC 0x2
+[   79.535792] Disabled fast string operations
+[   79.538250] Intel pstate controlling: cpu 2
+[   79.538345] CPU2 is up
+[   79.539407] smpboot: Booting Node 0 Processor 3 APIC 0x3
+[   79.550443] Disabled fast string operations
+[   79.552935] Intel pstate controlling: cpu 3
+[   79.553028] CPU3 is up
+[   79.557942] ACPI: Waking up from system sleep state S3
+[   79.704337] PM: noirq resume of devices complete after 141.798 msecs
+[   79.704586] PM: early resume of devices complete after 0.212 msecs
+[   79.704655] i915 0000:00:02.0: setting latency timer to 64
+[   79.704679] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
+[   79.704822] ahci 0000:00:1f.2: setting latency timer to 64
+[   79.705017] r8169 0000:02:00.0: System wakeup disabled by ACPI
+[   79.705019] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
+[   79.705081] ehci-pci 0000:00:1a.0: setting latency timer to 64
+[   79.705128] usb usb3: root hub lost power or was reset
+[   79.705130] usb usb4: root hub lost power or was reset
+[   79.705381] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
+[   79.705736] ehci-pci 0000:00:1d.0: setting latency timer to 64
+[   79.709853] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
+[   79.709864] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
+[   79.709875] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
+[   79.709885] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
+[   79.709896] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
+[   79.711422] usb usb1: usb resume
+[   79.711426] ehci-pci 0000:00:1a.0: resume root hub
+[   79.711833] usb usb2: usb resume
+[   79.711836] ehci-pci 0000:00:1d.0: resume root hub
+[   79.712102] [drm] Wrong MCH_SSKPD value: 0x16040307
+[   79.712104] [drm] This can cause pipe underruns and display issues.
+[   79.712104] [drm] Please upgrade your BIOS to fix this.
+[   79.712180] usb usb3: usb resume
+[   79.712206] hub 3-0:1.0: hub_reset_resume
+[   79.712208] hub 3-0:1.0: trying to enable port power on non-switchable hub
+[   79.713787] usb usb4: usb resume
+[   79.713807] hub 4-0:1.0: hub_reset_resume
+[   79.713810] hub 4-0:1.0: trying to enable port power on non-switchable hub
+[   79.743147] hub 2-0:1.0: hub_resume
+[   79.743152] hub 1-0:1.0: hub_resume
+[   79.743182] hub 2-0:1.0: port 1: status 0503 change 0000
+[   79.743185] hub 1-0:1.0: port 1: status 0503 change 0000
+[   79.743239] usb 1-1: finish resume
+[   79.743242] usb 2-1: finish resume
+[   79.743418] hub 2-1:1.0: hub_resume
+[   79.743443] hub 1-1:1.0: hub_resume
+[   79.743954] hub 1-1:1.0: port 2: status 0101 change 0001
+[   79.744383] hub 1-1:1.0: port 4: status 0101 change 0001
+[   79.744390] hub 2-1:1.0: port 5: status 0101 change 0001
+[   79.848031] ehci-pci 0000:00:1a.0: reused qh ffff88011860a840 schedule
+[   79.848035] ehci-pci 0000:00:1d.0: reused qh ffff88011860a740 schedule
+[   79.848038] usb 1-1: link qh256-0001/ffff88011860a840 start 1 [1/0 us]
+[   79.848041] usb 2-1: link qh256-0001/ffff88011860a740 start 1 [1/0 us]
+[   79.848138] usb 1-1.2: finish reset-resume
+[   79.848155] usb 2-1.5: finish reset-resume
+[   79.848416] usb 1-1.4: finish reset-resume
+[   80.043899] ata5: SATA link down (SStatus 0 SControl 300)
+[   80.055891] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[   80.060113] ata2.00: configured for UDMA/133
+[   80.063830] ata4: SATA link down (SStatus 0 SControl 300)
+[   80.075917] sd 1:0:0:0: [sdb] Starting disk
+[   80.108041] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
+[   80.394199] usb 1-1.2: link qh8-0e01/ffff88008facde40 start 4 [1/2 us]
+[   80.459795] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
+[   80.554585] btusb 2-1.5:1.0: no reset_resume for driver btusb?
+[   80.554589] btusb 2-1.5:1.1: no reset_resume for driver btusb?
+[   80.554594] btusb 2-1.5:1.0: forced unbind
+[   80.623646] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
+[   80.759572] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
+[   82.174381] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[   82.176647] ata1.00: configured for UDMA/133
+[   82.190388] sd 0:0:0:0: [sda] Starting disk
+[   82.219232] PM: resume of devices complete after 2516.422 msecs
+[   82.219284] btusb 2-1.5:1.0: usb_probe_interface
+[   82.219286] btusb 2-1.5:1.0: usb_probe_interface - got id
+[   82.220068] usb 2-1.5: link qh1-0e01/ffff880090491640 start 0 [1/2 us]
+[   82.220310] PM: Finishing wakeup.
+[   82.220375] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
+[   82.220382] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
+[   82.220387] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
+[   82.220392] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
+[   82.220397] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0004
+[   82.225319] hub 1-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
+[   82.225429] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s
+[   82.225439] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0020
+[   82.225549] hub 2-1:1.0: port 5, status 0103, change 0000, 12 Mb/s
+[   82.229293] hub 4-0:1.0: hub_suspend
+[   82.229305] usb usb4: bus auto-suspend, wakeup 1
+[   82.229324] hub 3-0:1.0: hub_suspend
+[   82.229329] usb usb3: bus auto-suspend, wakeup 1
+[   82.220312] Restarting tasks ... done.
+[   82.237054] video LNXVIDEO:00: Restoring backlight state
+[   82.692073] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
+[   82.698785] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
+[   82.903186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
+[   83.769515] usb 1-1.4: usb auto-suspend, wakeup 0
+[  109.238972] wlan0: authenticate with 00:04:0e:e4:00:3d
+[  109.242732] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
+[  109.244557] wlan0: authenticated
+[  109.244716] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
+[  109.244720] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
+[  109.247128] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
+[  109.251518] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1)
+[  109.256502] wlan0: associated
+[  109.256603] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
