Re: [PATCH RESEND] usb: gadget: lpc32xx_udc: Fix compatibility withSTOTG04

[Felipe Balbi]

Hi,

On Mon, Oct 15, 2012 at 09:47:35AM -0300, Alexandre Pereira da Silva wrote:
> The STOTG04 is an replacement for ISP1301.
> 
> Most of the registers on STOTG04 are the same as on ISP1301, but the
> register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the
> ST part.
> 
> This is a work around for this by using the interrupt source register that
> should behave the same on both parts and has the needed information.
> 
> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>
> ---
> 
> This patch is very important to LPC32xx users. IMHO this should go in for 3.7-rc2.
> 
>  drivers/usb/gadget/lpc32xx_udc.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
> index f696fb9..21a9861 100644
> --- a/drivers/usb/gadget/lpc32xx_udc.c
> +++ b/drivers/usb/gadget/lpc32xx_udc.c
> @@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work)
>  
>  		/* Get the VBUS status from the transceiver */
>  		value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
> -						 ISP1301_I2C_OTG_CONTROL_2);
> +						 ISP1301_I2C_INTERRUPT_SOURCE);
>  
>  		/* VBUS on or off? */
> -		if (value & OTG_B_SESS_VLD)
> +		if (value & INT_SESS_VLD)

why isn't this using a PHY driver instead ?

>  			udc->vbus = 1;
>  		else
>  			udc->vbus = 0;
> -- 
> 1.7.10
> 

-- 
balbi

Attachment: signature.asc
Description: Digital signature