Re: [Intel-gfx] Intel graphics drm issue?

From: Mark Hounschell
Date: Sun Oct 14 2012 - 10:19:38 EST


On 10/14/2012 07:26 AM, Daniel Vetter wrote:
On Sun, Oct 14, 2012 at 12:20 PM, Mark Hounschell <dmarkh@xxxxxxxxxx> wrote:
Hi Daniel,

cat /proc/cmdline
root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4
video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal
drm.debug=0xe

dmesg is attached

From the dmesg:

[ 1.833195] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the
agpgart module.

Which is the root-cause preventing i915.ko from loading. Now with 3.7
we /shouldn't/ all that agp crap any longer on snb/ivb, so I'm a bit
confused why it still tries to initialize it. Can you maybe attach
your .config?

Also, we need to employ some dirty runtime tricks to no longer require
agp on newer chips, since we still need to keep it around for
backwards-compat with old userspace on old chips. Can you please check
with the below diff whether this hack works?

Thanks, Daniel

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index a7837e5..1152502 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -842,6 +842,7 @@ i915_pci_probe(struct pci_dev *pdev, const struct
pci_device_id *ent)
if (intel_info->gen != 3) {
driver.driver_features &=
~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
+ printk("dropping agp requirement\n");
} else if (!intel_agp_enabled) {
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
return -ENODEV;


OK. Applied to 3.6.2. The dmesg is attached. The message did not show up.
I'll be here most of the day.

Mark [ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sun Oct 14 02:03:31 EDT 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 21F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff]
[ 0.000000] RAMDISK: [mem 0x1e6bc000-0x1ffeffff]
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013)
[ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013)
[ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117)
[ 0.000000] ACPI: FACS da40bf80 00040
[ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013)
[ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013)
[ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097)
[ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005)
[ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112)
[ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117)
[ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2616MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xdaffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd9e5efff]
[ 0.000000] node 0: [mem 0xda2f9000-0xda37afff]
[ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff]
[ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff]
[ 0.000000] On node 0 totalpages: 894343
[ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 220974 pages, LIFO batch:31
[ 0.000000] HighMem zone: 5233 pages used for memmap
[ 0.000000] HighMem zone: 662411 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152
[ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal drm.debug=0xe irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000377fe:000db000)
[ 0.000000] Memory: 3514636k/3588096k available (4577k kernel code, 62736k reserved, 2220k data, 452k init, 2670576k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB)
[ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.155 MHz processor
[ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.98 BogoMIPS (lpj=11307183)
[ 0.000002] pid_max: default: 32768 minimum: 301
[ 0.000015] Security Framework initialized
[ 0.000024] AppArmor: AppArmor initialized
[ 0.000028] Mount-cache hash table entries: 512
[ 0.000135] Initializing cgroup subsys net_cls
[ 0.000136] Initializing cgroup subsys blkio
[ 0.000153] CPU: Physical Processor ID: 0
[ 0.000154] CPU: Processor Core ID: 0
[ 0.000156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000156] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000695] mce: CPU supports 9 MCE banks
[ 0.000704] CPU0: Thermal monitoring enabled (TM1)
[ 0.000710] process: using mwait in idle threads
[ 0.000715] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.000715] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.000715] tlb_flushall_shift is 0x1
[ 0.001279] ACPI: Core revision 20120711
[ 0.007330] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.007742] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040649] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09
[ 0.146599] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.146603] ... version: 3
[ 0.146604] ... bit width: 48
[ 0.146604] ... generic registers: 8
[ 0.146605] ... value mask: 0000ffffffffffff
[ 0.146606] ... max period: 000000007fffffff
[ 0.146606] ... fixed-purpose events: 3
[ 0.146607] ... event mask: 00000007000000ff
[ 0.193140] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000
[ 0.203366] Initializing CPU#1
[ 0.193142] smpboot: Booting Node 0, Processors #1
[ 0.219731] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000
[ 0.229900] Initializing CPU#2
[ 0.219734] #2
[ 0.246321] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000
[ 0.246324] #3 OK
[ 0.256590] Initializing CPU#3
[ 0.260025] Brought up 4 CPUs
[ 0.260028] smpboot: Total of 4 processors activated (27148.95 BogoMIPS)
[ 0.262503] devtmpfs: initialized
[ 0.262674] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes)
[ 0.262679] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes)
[ 0.262732] dummy:
[ 0.262761] RTC time: 10:13:59, date: 10/14/12
[ 0.262785] NET: Registered protocol family 16
[ 0.299619] ACPI: bus type pci registered
[ 0.299664] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.299666] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.299666] PCI: Using MMCONFIG for extended config space
[ 0.299667] PCI: Using configuration type 1 for base access
[ 0.300122] bio: create slab <bio-0> at 0
[ 0.300159] ACPI: Added _OSI(Module Device)
[ 0.300159] ACPI: Added _OSI(Processor Device)
[ 0.300160] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.300161] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.301489] ACPI: EC: Look up EC in DSDT
[ 0.303004] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.313523] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.313858] ACPI: Dynamic OEM Table Load:
[ 0.313860] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.322988] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.323354] ACPI: Dynamic OEM Table Load:
[ 0.323355] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.333140] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.333478] ACPI: Dynamic OEM Table Load:
[ 0.333479] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.343545] ACPI: Interpreter enabled
[ 0.343551] ACPI: (supports S0 S3 S4 S5)
[ 0.343562] ACPI: Using IOAPIC for interrupt routing
[ 0.347524] ACPI: Power Resource [FN00] (off)
[ 0.347573] ACPI: Power Resource [FN01] (off)
[ 0.347620] ACPI: Power Resource [FN02] (off)
[ 0.347669] ACPI: Power Resource [FN03] (off)
[ 0.347716] ACPI: Power Resource [FN04] (off)
[ 0.348073] ACPI: No dock devices found.
[ 0.348076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.348309] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.348639] PCI host bridge to bus 0000:00
[ 0.348641] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
[ 0.348642] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.348644] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.348645] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.348646] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.348647] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.348648] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.348649] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.348650] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.348651] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.348653] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.348654] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.348660] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.348689] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.348711] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.348729] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.348736] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.348741] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.348744] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.348787] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.348807] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 0.348871] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.348892] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.348913] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit]
[ 0.348984] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.349011] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.349027] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.349034] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff]
[ 0.349042] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]
[ 0.349098] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.349120] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.349139] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff]
[ 0.349222] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.349248] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.349377] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.349414] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.349486] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.349511] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.349530] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff]
[ 0.349613] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.349636] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[ 0.349752] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.349768] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
[ 0.349775] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
[ 0.349783] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
[ 0.349790] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
[ 0.349797] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.349804] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff]
[ 0.349844] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.349860] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.349873] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit]
[ 0.349892] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.349930] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e]
[ 0.349947] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400
[ 0.350053] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.350060] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.350062] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.350108] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02]
[ 0.350128] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100
[ 0.350151] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff]
[ 0.350262] pci 0000:02:04.0: supports D1 D2
[ 0.350313] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.350318] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.350399] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
[ 0.350401] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.350453] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e]
[ 0.350456] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.350460] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.350463] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.350482] pci_bus 0000:00: on NUMA node 0
[ 0.350484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.350571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.350599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 0.350621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.350712] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.350852] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.353707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.353746] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.353781] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.353815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.353851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.353888] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.353925] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.353959] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.354001] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.354004] vgaarb: loaded
[ 0.354005] vgaarb: bridge control possible 0000:00:02.0
[ 0.354063] SCSI subsystem initialized
[ 0.354065] ACPI: bus type scsi registered
[ 0.354081] libata version 3.00 loaded.
[ 0.354091] ACPI: bus type usb registered
[ 0.354100] usbcore: registered new interface driver usbfs
[ 0.354105] usbcore: registered new interface driver hub
[ 0.354116] usbcore: registered new device driver usb
[ 0.354142] PCI: Using ACPI for IRQ routing
[ 0.355510] PCI: pci_cache_line_size set to 64 bytes
[ 0.355558] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.355559] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.355560] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff]
[ 0.355562] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff]
[ 0.355563] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff]
[ 0.355564] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.355615] NetLabel: Initializing
[ 0.355616] NetLabel: domain hash size = 128
[ 0.355616] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.355622] NetLabel: unlabeled traffic allowed by default
[ 0.355675] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.355679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.357687] Switching to clocksource hpet
[ 0.357728] AppArmor: AppArmor Filesystem Enabled
[ 0.357736] pnp: PnP ACPI init
[ 0.357741] ACPI: bus type pnp registered
[ 0.357921] pnp 00:00: [bus 00-3e]
[ 0.357923] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.357924] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.357925] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.357926] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.357928] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.357929] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.357930] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.357931] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.357932] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.357933] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.357935] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.357936] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.357937] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.357938] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.357939] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.357940] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.357941] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.357942] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 0.357943] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.357974] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.357990] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.358007] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.358009] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358016] pnp 00:02: [io 0x0000-0x001f]
[ 0.358017] pnp 00:02: [io 0x0081-0x0091]
[ 0.358018] pnp 00:02: [io 0x0093-0x009f]
[ 0.358019] pnp 00:02: [io 0x00c0-0x00df]
[ 0.358020] pnp 00:02: [dma 4]
[ 0.358032] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358036] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.358047] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.358101] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.358112] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358120] pnp 00:05: [io 0x002e-0x002f]
[ 0.358121] pnp 00:05: [io 0x004e-0x004f]
[ 0.358122] pnp 00:05: [io 0x0061]
[ 0.358123] pnp 00:05: [io 0x0063]
[ 0.358124] pnp 00:05: [io 0x0065]
[ 0.358125] pnp 00:05: [io 0x0067]
[ 0.358126] pnp 00:05: [io 0x0070]
[ 0.358127] pnp 00:05: [io 0x0080]
[ 0.358128] pnp 00:05: [io 0x0092]
[ 0.358129] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.358130] pnp 00:05: [io 0x0680-0x069f]
[ 0.358131] pnp 00:05: [io 0x1000-0x100f]
[ 0.358131] pnp 00:05: [io 0xffff]
[ 0.358132] pnp 00:05: [io 0xffff]
[ 0.358133] pnp 00:05: [io 0x0400-0x0453]
[ 0.358135] pnp 00:05: [io 0x0458-0x047f]
[ 0.358136] pnp 00:05: [io 0x0500-0x057f]
[ 0.358137] pnp 00:05: [io 0x164e-0x164f]
[ 0.358157] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.358158] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.358159] system 00:05: [io 0xffff] has been reserved
[ 0.358160] system 00:05: [io 0xffff] has been reserved
[ 0.358162] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.358163] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.358164] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.358165] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.358167] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358172] pnp 00:06: [io 0x0070-0x0077]
[ 0.358177] pnp 00:06: [irq 8]
[ 0.358188] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358204] pnp 00:07: [io 0x0454-0x0457]
[ 0.358222] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.358223] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.358278] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 0.358279] pnp 00:08: [io 0x0a30-0x0a3f]
[ 0.358280] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 0.358281] pnp 00:08: [io 0x0250-0x025f]
[ 0.358298] system 00:08: [io 0x0a30-0x0a3f] has been reserved
[ 0.358299] system 00:08: [io 0x0250-0x025f] has been reserved
[ 0.358301] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358337] pnp 00:09: [io 0x0010-0x001f]
[ 0.358338] pnp 00:09: [io 0x0022-0x003f]
[ 0.358339] pnp 00:09: [io 0x0044-0x005f]
[ 0.358340] pnp 00:09: [io 0x0062-0x0063]
[ 0.358341] pnp 00:09: [io 0x0065-0x006f]
[ 0.358342] pnp 00:09: [io 0x0072-0x007f]
[ 0.358343] pnp 00:09: [io 0x0080]
[ 0.358344] pnp 00:09: [io 0x0084-0x0086]
[ 0.358345] pnp 00:09: [io 0x0088]
[ 0.358346] pnp 00:09: [io 0x008c-0x008e]
[ 0.358347] pnp 00:09: [io 0x0090-0x009f]
[ 0.358348] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.358349] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.358350] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.358370] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.358372] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358377] pnp 00:0a: [io 0x00f0-0x00ff]
[ 0.358384] pnp 00:0a: [irq 13]
[ 0.358395] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358571] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.358572] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 0.358573] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 0.358574] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 0.358575] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 0.358576] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 0.358577] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 0.358578] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 0.358579] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.358580] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 0.358581] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 0.358612] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.358614] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.358615] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.358616] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.358617] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.358619] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.358620] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.358621] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.358622] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.358624] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.358625] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.358626] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358735] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 0.358736] pnp 00:0c: [mem 0x40004000-0x40004fff]
[ 0.358768] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 0.358770] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[ 0.358771] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358786] pnp: PnP ACPI: found 13 devices
[ 0.358787] ACPI: ACPI bus type pnp unregistered
[ 0.394097] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.394101] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.394116] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.394117] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.394121] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.394141] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.394143] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.394148] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.394180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.394181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.394182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.394183] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.394184] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.394186] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.394187] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.394188] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.394189] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.394190] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.394191] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.394192] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.394194] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.394195] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.394210] NET: Registered protocol family 2
[ 0.394290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.394412] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.394465] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.394471] TCP: reno registered
[ 0.394472] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.394474] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.394502] NET: Registered protocol family 1
[ 0.394508] pci 0000:00:02.0: Boot video device
[ 0.427557] PCI: CLS 64 bytes, default 64
[ 0.427597] Unpacking initramfs...
[ 0.727363] Freeing initrd memory: 25808k freed
[ 0.729843] audit: initializing netlink socket (disabled)
[ 0.729851] type=2000 audit(1350209638.626:1): initialized
[ 0.740589] bounce pool size: 64 pages
[ 0.740592] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.741410] VFS: Disk quotas dquot_6.5.2
[ 0.741436] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.741567] msgmni has been set to 1698
[ 0.741692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.741708] io scheduler noop registered
[ 0.741709] io scheduler deadline registered
[ 0.741713] io scheduler cfq registered (default)
[ 0.741775] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.741960] intel_idle: MWAIT substates: 0x1120
[ 0.741961] intel_idle: v0.4 model 0x3A
[ 0.741962] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.744699] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.745065] Non-volatile memory driver v1.3
[ 0.745066] Linux agpgart interface v0.103
[ 0.745139] ahci 0000:00:1f.2: version 3.0
[ 0.745175] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.745197] ahci: SSS flag set, parallel bus scan disabled
[ 0.756610] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[ 0.756614] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.756622] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.770128] scsi0 : ahci
[ 0.770164] scsi1 : ahci
[ 0.770196] scsi2 : ahci
[ 0.770225] scsi3 : ahci
[ 0.770254] scsi4 : ahci
[ 0.770281] scsi5 : ahci
[ 0.770304] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41
[ 0.770306] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41
[ 0.770307] ata3: DUMMY
[ 0.770308] ata4: DUMMY
[ 0.770308] ata5: DUMMY
[ 0.770311] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41
[ 0.770348] libphy: Fixed MDIO Bus: probed
[ 0.770350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.770368] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.770371] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.770375] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.774266] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.774273] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.774284] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000
[ 0.783181] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.783201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.783203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.783205] usb usb1: Product: EHCI Host Controller
[ 0.783208] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd
[ 0.783210] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.783288] hub 1-0:1.0: USB hub found
[ 0.783290] hub 1-0:1.0: 2 ports detected
[ 0.783334] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.783336] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.783339] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.787228] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.787234] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.787244] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000
[ 0.796478] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.796492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.796494] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.796496] usb usb2: Product: EHCI Host Controller
[ 0.796499] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd
[ 0.796501] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.796568] hub 2-0:1.0: USB hub found
[ 0.796569] hub 2-0:1.0: 2 ports detected
[ 0.796602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.796609] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.796616] Initializing USB Mass Storage driver...
[ 0.796625] usbcore: registered new interface driver usb-storage
[ 0.796626] USB Mass Storage support registered.
[ 0.796629] usbcore: registered new interface driver ums-alauda
[ 0.796632] usbcore: registered new interface driver ums-cypress
[ 0.796636] usbcore: registered new interface driver ums-datafab
[ 0.796639] usbcore: registered new interface driver ums-freecom
[ 0.796642] usbcore: registered new interface driver ums-isd200
[ 0.796645] usbcore: registered new interface driver ums-jumpshot
[ 0.796648] usbcore: registered new interface driver ums-karma
[ 0.796650] usbcore: registered new interface driver ums-onetouch
[ 0.796653] usbcore: registered new interface driver ums-sddr09
[ 0.796656] usbcore: registered new interface driver ums-sddr55
[ 0.796659] usbcore: registered new interface driver ums-usbat
[ 0.796681] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.799239] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.799245] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.799288] mousedev: PS/2 mouse device common for all mice
[ 0.799336] rtc_cmos 00:06: RTC can wake from S4
[ 0.799433] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.799461] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.799497] cpuidle: using governor ladder
[ 0.799578] usbcore: registered new interface driver usbhid
[ 0.799579] usbhid: USB HID core driver
[ 0.799656] ashmem: initialized
[ 0.799731] TCP: cubic registered
[ 0.799795] NET: Registered protocol family 10
[ 0.799886] lib80211: common routines for IEEE802.11 drivers
[ 0.799887] lib80211_crypt: registered algorithm 'NULL'
[ 0.799891] Key type dns_resolver registered
[ 0.799893] Key type ceph registered
[ 0.799896] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 0.800026] Using IPI No-Shortcut mode
[ 0.800137] registered taskstats version 1
[ 0.800435] Magic number: 0:304:224
[ 0.800513] rtc_cmos 00:06: setting system clock to 2012-10-14 10:13:59 UTC (1350209639)
[ 1.089004] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.089014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.098250] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.098255] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.098258] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.101014] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133
[ 1.106053] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.106058] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.106061] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.108807] ata1.00: configured for UDMA/133
[ 1.127630] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5
[ 1.212325] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.212329] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.212600] hub 1-1:1.0: USB hub found
[ 1.212728] hub 1-1:1.0: 6 ports detected
[ 1.318331] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.441665] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.441669] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.441945] hub 2-1:1.0: USB hub found
[ 1.442073] hub 2-1:1.0: 8 ports detected
[ 1.444641] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.446013] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.446017] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.446020] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.456431] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133
[ 1.456436] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.465971] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.465977] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.465980] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.476387] ata2.00: configured for UDMA/133
[ 1.476563] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5
[ 1.127876] ACPI: Invalid Power Resource to register!
[ 1.476754] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.476971] sd 1:0:0:0: [sda] Write Protect is off
[ 1.476973] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.477042] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.477603] sda: sda1 sda2 sda3 sda4
[ 1.478087] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.521223] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[ 1.607602] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011
[ 1.607606] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.607609] usb 1-1.2: Product: Remote Download Wireless Adapter
[ 1.607611] usb 1-1.2: Manufacturer: Broadcom
[ 1.607613] usb 1-1.2: SerialNumber: 0
[ 1.707310] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
[ 1.727156] tsc: Refined TSC clocksource calibration: 3392.304 MHz
[ 1.727162] Switching to clocksource tsc
[ 1.793648] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.793775] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231
[ 1.793777] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.793779] usb 2-1.6: Product: Dynex wireless combo
[ 1.793784] Freeing unused kernel memory: 452k freed
[ 1.816507] emc: device handler registered
[ 1.817410] rdac: device handler registered
[ 1.818320] alua: device handler registered
[ 1.819179] hp_sw: device handler registered
[ 1.821576] udevd[118]: starting version 182
[ 1.826651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.826867] ACPI: Power Button [PWRB]
[ 1.826899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.826919] ACPI: Power Button [PWRF]
[ 1.831800] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.831807] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.831810] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.831895] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.831902] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000
[ 1.831945] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.831990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.831992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.831993] usb usb3: Product: xHCI Host Controller
[ 1.831994] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd
[ 1.831995] usb usb3: SerialNumber: 0000:00:14.0
[ 1.833291] [drm] Initialized drm 1.1.0 20060810
[ 1.835925] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2
[ 1.836052] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0
[ 1.836173] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3
[ 1.836327] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1
[ 1.837729] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
[ 1.837788] DRM: Fill_in_dev failed.
[ 1.846940] xHCI xhci_add_endpoint called for root hub
[ 1.846941] xHCI xhci_check_bandwidth called for root hub
[ 1.846964] hub 3-0:1.0: USB hub found
[ 1.846973] hub 3-0:1.0: 4 ports detected
[ 1.847015] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.847017] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.847029] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.847031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.847053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.847054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.847055] usb usb4: Product: xHCI Host Controller
[ 1.847056] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd
[ 1.847057] usb usb4: SerialNumber: 0000:00:14.0
[ 1.847551] xHCI xhci_add_endpoint called for root hub
[ 1.847553] xHCI xhci_check_bandwidth called for root hub
[ 1.847609] hub 4-0:1.0: USB hub found
[ 1.847619] hub 4-0:1.0: 4 ports detected
[ 1.847906] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.847907] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.848033] ACPI: Fan [FAN0] (off)
[ 1.848059] ACPI: Fan [FAN1] (off)
[ 1.848083] ACPI: Fan [FAN2] (off)
[ 1.848103] ACPI: Fan [FAN3] (off)
[ 1.848121] ACPI: Fan [FAN4] (off)
[ 1.925224] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 1.939850] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr
[ 2.211449] systemd-readahead-replay[270]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 2.608192] udevd[303]: starting version 182
[ 2.672420] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
[ 2.711815] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
[ 2.712101] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
[ 2.712310] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
[ 2.712607] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 2.797184] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.806840] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr
[ 3.055851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.056329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.056892] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 3.056893] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 3.056917] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.056959] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.056989] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 3.070946] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.072117] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.072258] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.082008] kvm: disabled by bios
[ 3.086166] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.086168] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.086230] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.214386] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS
[ 3.310623] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85
[ 3.310625] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.310671] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.476804] ACPI: Invalid Power Resource to register!
[ 3.310749] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 3.310753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.310756] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 3.310758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.310759] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.310783] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 3.310786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.330792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 4.402935] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 4.509282] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 4.509376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.750895] RPC: Registered named UNIX socket transport module.
[ 4.750897] RPC: Registered udp transport module.
[ 4.750898] RPC: Registered tcp transport module.
[ 4.750899] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.753198] FS-Cache: Loaded
[ 4.756182] FS-Cache: Netfs 'nfs' registered for caching
[ 5.345150] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0
[ 5.347663] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
[ 6.128311] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.128315] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6.128350] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready