[PATCH 4/5] pinctrl/nomadik: move the platform data header
From: Linus Walleij
Date: Wed Oct 10 2012 - 08:38:32 EST
From: Linus Walleij <linus.walleij@xxxxxxxxxx>
This moves the platform data header for the Nomadik pin controller
to <linux/platform_data/pinctrl-nomadik.h>.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/mach-nomadik/board-nhk8815.c | 2 +-
arch/arm/mach-nomadik/cpu-8815.c | 2 +-
arch/arm/mach-nomadik/i2c-8815nhk.c | 2 +-
arch/arm/mach-ux500/board-mop500-audio.c | 2 +-
arch/arm/mach-ux500/board-mop500-pins.c | 2 +-
arch/arm/mach-ux500/board-mop500.c | 2 +-
arch/arm/mach-ux500/cpu-db8500.c | 4 +-
arch/arm/mach-ux500/devices-common.c | 3 +-
arch/arm/plat-nomadik/include/plat/gpio-nomadik.h | 108 ----------------------
drivers/pinctrl/pinctrl-nomadik.c | 2 +-
drivers/pinctrl/pinctrl-nomadik.h | 2 +-
include/linux/platform_data/pinctrl-nomadik.h | 108 ++++++++++++++++++++++
12 files changed, 119 insertions(+), 120 deletions(-)
delete mode 100644 arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
create mode 100644 include/linux/platform_data/pinctrl-nomadik.h
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index bfa1eab..3a41ad0 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
@@ -32,7 +33,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
#include <plat/pincfg.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index b617eae..1273931 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -26,8 +26,8 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 6d14454..f81496f 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -4,7 +4,7 @@
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <plat/pincfg.h>
/*
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 070629a..ea828cc 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,8 +7,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
-#include <plat/gpio-nomadik.h>
#include <plat/pincfg.h>
#include <plat/ste_dma40.h>
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a267c6d..05f2bb5 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,10 +9,10 @@
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 416d436..0a3dd60 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,13 +37,13 @@
#include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bcdfe6b..87a8f9f 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,14 +17,14 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index dfdd4a5..692a77a 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,8 +11,7 @@
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index a749994..0000000
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- * Author: Prafulla WADASKAR <prafulla.wadaskar@xxxxxx>
- * Copyright (C) 2009 Alessandro Rubini <rubini@xxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-#define GPIO_BLOCK_SHIFT 5
-#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT 0x00
-#define NMK_GPIO_DATS 0x04
-#define NMK_GPIO_DATC 0x08
-#define NMK_GPIO_PDIS 0x0c
-#define NMK_GPIO_DIR 0x10
-#define NMK_GPIO_DIRS 0x14
-#define NMK_GPIO_DIRC 0x18
-#define NMK_GPIO_SLPC 0x1c
-#define NMK_GPIO_AFSLA 0x20
-#define NMK_GPIO_AFSLB 0x24
-#define NMK_GPIO_LOWEMI 0x28
-
-#define NMK_GPIO_RIMSC 0x40
-#define NMK_GPIO_FIMSC 0x44
-#define NMK_GPIO_IS 0x48
-#define NMK_GPIO_IC 0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS 0x58
-/* These appear in DB8540 and later ASICs */
-#define NMK_GPIO_EDGELEVEL 0x5C
-#define NMK_GPIO_LEVEL 0x60
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO 0
-#define NMK_GPIO_ALT_A 1
-#define NMK_GPIO_ALT_B 2
-#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
- NMK_GPIO_PULL_NONE,
- NMK_GPIO_PULL_UP,
- NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
- NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_NOCHANGE,
- NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
- return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
- char *name;
- int first_gpio;
- int first_irq;
- int num_gpio;
- u32 (*get_secondary_status)(unsigned int bank);
- void (*set_ioforce)(bool enable);
- bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index e4d3778..63cdfc1 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -31,11 +31,11 @@
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
#include "pinctrl-nomadik.h"
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index eef316e..bcd4191 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,7 +1,7 @@
#ifndef PINCTRL_PINCTRL_NOMADIK_H
#define PINCTRL_PINCTRL_NOMADIK_H
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
/* Package definitions */
#define PINCTRL_NMK_STN8815 0
diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
new file mode 100644
index 0000000..a749994
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -0,0 +1,108 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Author: Prafulla WADASKAR <prafulla.wadaskar@xxxxxx>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@xxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT 0x00
+#define NMK_GPIO_DATS 0x04
+#define NMK_GPIO_DATC 0x08
+#define NMK_GPIO_PDIS 0x0c
+#define NMK_GPIO_DIR 0x10
+#define NMK_GPIO_DIRS 0x14
+#define NMK_GPIO_DIRC 0x18
+#define NMK_GPIO_SLPC 0x1c
+#define NMK_GPIO_AFSLA 0x20
+#define NMK_GPIO_AFSLB 0x24
+#define NMK_GPIO_LOWEMI 0x28
+
+#define NMK_GPIO_RIMSC 0x40
+#define NMK_GPIO_FIMSC 0x44
+#define NMK_GPIO_IS 0x48
+#define NMK_GPIO_IC 0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS 0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL 0x60
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO 0
+#define NMK_GPIO_ALT_A 1
+#define NMK_GPIO_ALT_B 2
+#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+ NMK_GPIO_PULL_NONE,
+ NMK_GPIO_PULL_UP,
+ NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+ NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_NOCHANGE,
+ NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+#ifdef CONFIG_PINCTRL_NOMADIK
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+#else
+static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+ return -ENODEV;
+}
+#endif
+extern int nmk_gpio_get_mode(int gpio);
+
+extern void nmk_gpio_wakeups_suspend(void);
+extern void nmk_gpio_wakeups_resume(void);
+
+extern void nmk_gpio_clocks_enable(void);
+extern void nmk_gpio_clocks_disable(void);
+
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+ char *name;
+ int first_gpio;
+ int first_irq;
+ int num_gpio;
+ u32 (*get_secondary_status)(unsigned int bank);
+ void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
+};
+
+#endif /* __PLAT_NOMADIK_GPIO */
--
1.7.11.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/