[PATCH] staging/comedi: Use pr_ or dev_ printks in drivers/usbduxfast.c

From: YAMANE Toshiaki
Date: Wed Oct 10 2012 - 08:21:22 EST


fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...

and added pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@xxxxxxxxx>
---
drivers/staging/comedi/drivers/usbduxfast.c | 151 +++++++++++++--------------
1 file changed, 71 insertions(+), 80 deletions(-)

diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 1154a7e..2272cb7 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -37,6 +37,8 @@
* udev coldplug problem
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/firmware.h>
#include <linux/module.h>
@@ -216,8 +218,9 @@ static int send_dux_commands(struct usbduxfastsub_s *udfs, int cmd_type)
usb_sndbulkpipe(udfs->usbdev, CHANNELLISTEP),
udfs->dux_commands, SIZEOFDUXBUFFER, &nsent, 10000);
if (tmp < 0)
- printk(KERN_ERR "comedi%d: could not transmit dux_commands to"
- "the usb-device, err=%d\n", udfs->comedidev->minor, tmp);
+ dev_err(&udfs->interface->dev,
+ "could not transmit dux_commands to the usb-device, err=%d\n",
+ tmp);
return tmp;
}

@@ -252,7 +255,8 @@ static int usbduxfast_ai_stop(struct usbduxfastsub_s *udfs, int do_unlink)
int ret = 0;

if (!udfs) {
- printk(KERN_ERR "comedi?: usbduxfast_ai_stop: udfs=NULL!\n");
+ dev_err(&udfs->interface->dev,
+ "%s: udfs=NULL!\n", __func__);
return -EFAULT;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -284,7 +288,7 @@ static int usbduxfast_ai_cancel(struct comedi_device *dev,
#endif
udfs = dev->private;
if (!udfs) {
- printk(KERN_ERR "comedi: usbduxfast_ai_cancel: udfs=NULL\n");
+ dev_err(dev->class_dev, "%s: udfs=NULL\n", __func__);
return -EFAULT;
}
down(&udfs->sem);
@@ -313,22 +317,19 @@ static void usbduxfastsub_ai_Irq(struct urb *urb)

/* sanity checks - is the urb there? */
if (!urb) {
- printk(KERN_ERR "comedi_: usbduxfast_: ao int-handler called "
- "with urb=NULL!\n");
+ pr_err("ao int-handler called with urb=NULL!\n");
return;
}
/* the context variable points to the subdevice */
this_comedidev = urb->context;
if (!this_comedidev) {
- printk(KERN_ERR "comedi_: usbduxfast_: urb context is a NULL "
- "pointer!\n");
+ pr_err("urb context is a NULL pointer!\n");
return;
}
/* the private structure of the subdevice is usbduxfastsub_s */
udfs = this_comedidev->private;
if (!udfs) {
- printk(KERN_ERR "comedi_: usbduxfast_: private of comedi "
- "subdev is a NULL pointer!\n");
+ pr_err("private of comedi subdev is a NULL pointer!\n");
return;
}
/* are we running a command? */
@@ -427,8 +428,8 @@ static void usbduxfastsub_ai_Irq(struct urb *urb)
urb->status = 0;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- printk(KERN_ERR "comedi%d: usbduxfast: urb resubm failed: %d",
- udfs->comedidev->minor, err);
+ dev_err(&udfs->interface->dev,
+ "urb resubm failed: %d", err);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_ERROR;
comedi_event(udfs->comedidev, s);
@@ -477,8 +478,8 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
if (ret < 0) {
- printk(KERN_ERR "comedi_: usbduxfast: control msg failed "
- "(stop)\n");
+ dev_err(&udfs->interface->dev,
+ "control msg failed (stop)\n");
return ret;
}

@@ -512,7 +513,7 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
#endif

if (ret < 0) {
- printk(KERN_ERR "comedi_: usbduxfast: uppload failed\n");
+ dev_err(&udfs->interface->dev, "uppload failed\n");
return ret;
}

@@ -538,8 +539,8 @@ static int usbduxfastsub_submit_InURBs(struct usbduxfastsub_s *udfs)
#endif
ret = usb_submit_urb(udfs->urbIn, GFP_ATOMIC);
if (ret) {
- printk(KERN_ERR "comedi_: usbduxfast: ai: usb_submit_urb error"
- " %d\n", ret);
+ dev_err(&udfs->interface->dev,
+ "ai: usb_submit_urb error %d\n", ret);
return ret;
}
return 0;
@@ -682,8 +683,7 @@ static int usbduxfast_ai_inttrig(struct comedi_device *dev,
#endif

if (trignum != 0) {
- printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: invalid"
- " trignum\n", dev->minor);
+ dev_err(dev->class_dev, "%s: invalid trignum\n", __func__);
up(&udfs->sem);
return -EINVAL;
}
@@ -691,16 +691,16 @@ static int usbduxfast_ai_inttrig(struct comedi_device *dev,
udfs->ai_cmd_running = 1;
ret = usbduxfastsub_submit_InURBs(udfs);
if (ret < 0) {
- printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: "
- "urbSubmit: err=%d\n", dev->minor, ret);
+ dev_err(dev->class_dev,
+ "%s: urbSubmit: err=%d\n", __func__, ret);
udfs->ai_cmd_running = 0;
up(&udfs->sem);
return ret;
}
s->async->inttrig = NULL;
} else {
- printk(KERN_ERR "comedi%d: ai_inttrig but acqu is already"
- " running\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_inttrig but acqu is already running\n");
}
up(&udfs->sem);
return 1;
@@ -738,8 +738,8 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
return -ENODEV;
}
if (udfs->ai_cmd_running) {
- printk(KERN_ERR "comedi%d: ai_cmd not possible. Another ai_cmd"
- " is running.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_cmd not possible. Another ai_cmd is running.\n");
up(&udfs->sem);
return -EBUSY;
}
@@ -757,31 +757,29 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
for (i = 0; i < cmd->chanlist_len; ++i) {
chan = CR_CHAN(cmd->chanlist[i]);
if (chan != i) {
- printk(KERN_ERR "comedi%d: cmd is accepting "
- "only consecutive channels.\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "cmd is accepting only consecutive channels.\n");
up(&udfs->sem);
return -EINVAL;
}
if ((gain != CR_RANGE(cmd->chanlist[i]))
&& (cmd->chanlist_len > 3)) {
- printk(KERN_ERR "comedi%d: the gain must be"
- " the same for all channels.\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "the gain must be the same for all channels.\n");
up(&udfs->sem);
return -EINVAL;
}
if (i >= NUMCHANNELS) {
- printk(KERN_ERR "comedi%d: channel list too"
- " long\n", dev->minor);
+ dev_err(dev->class_dev,
+ "channel list too long\n");
break;
}
}
}
steps = 0;
if (cmd->scan_begin_src == TRIG_TIMER) {
- printk(KERN_ERR "comedi%d: usbduxfast: "
- "scan_begin_src==TRIG_TIMER not valid.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "scan_begin_src==TRIG_TIMER not valid.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -789,22 +787,21 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
steps = (cmd->convert_arg * 30) / 1000;

if ((steps < MIN_SAMPLING_PERIOD) && (cmd->chanlist_len != 1)) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: steps=%ld, "
- "scan_begin_arg=%d. Not properly tested by cmdtest?\n",
- dev->minor, steps, cmd->scan_begin_arg);
+ dev_err(dev->class_dev,
+ "ai_cmd: steps=%ld, scan_begin_arg=%d. Not properly tested by cmdtest?\n",
+ steps, cmd->scan_begin_arg);
up(&udfs->sem);
return -EINVAL;
}
if (steps > MAX_SAMPLING_PERIOD) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: sampling rate "
- "too low.\n", dev->minor);
+ dev_err(dev->class_dev, "ai_cmd: sampling rate too low.\n");
up(&udfs->sem);
return -EINVAL;
}
if ((cmd->start_src == TRIG_EXT) && (cmd->chanlist_len != 1)
&& (cmd->chanlist_len != 16)) {
- printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: TRIG_EXT only"
- " with 1 or 16 channels possible.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_cmd: TRIG_EXT only with 1 or 16 channels possible.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -1121,8 +1118,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
break;

default:
- printk(KERN_ERR "comedi %d: unsupported combination of "
- "channels\n", dev->minor);
+ dev_err(dev->class_dev, "unsupported combination of channels\n");
up(&udfs->sem);
return -EFAULT;
}
@@ -1134,17 +1130,16 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
/* 0 means that the AD commands are sent */
result = send_dux_commands(udfs, SENDADCOMMANDS);
if (result < 0) {
- printk(KERN_ERR "comedi%d: adc command could not be submitted."
- "Aborting...\n", dev->minor);
+ dev_err(dev->class_dev,
+ "adc command could not be submitted. Aborting...\n");
up(&udfs->sem);
return result;
}
if (cmd->stop_src == TRIG_COUNT) {
udfs->ai_sample_count = cmd->stop_arg * cmd->scan_end_arg;
if (udfs->ai_sample_count < 1) {
- printk(KERN_ERR "comedi%d: "
- "(cmd->stop_arg)*(cmd->scan_end_arg)<1, "
- "aborting.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "(cmd->stop_arg)*(cmd->scan_end_arg)<1, aborting.\n");
up(&udfs->sem);
return -EFAULT;
}
@@ -1193,8 +1188,7 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,

udfs = dev->private;
if (!udfs) {
- printk(KERN_ERR "comedi%d: ai_insn_read: no usb dev.\n",
- dev->minor);
+ dev_err(dev->class_dev, "%s: no usb dev.\n", __func__);
return -ENODEV;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -1207,8 +1201,8 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
return -ENODEV;
}
if (udfs->ai_cmd_running) {
- printk(KERN_ERR "comedi%d: ai_insn_read not possible. Async "
- "Command is running.\n", dev->minor);
+ dev_err(dev->class_dev,
+ "ai_insn_read not possible. Async Command is running.\n");
up(&udfs->sem);
return -EBUSY;
}
@@ -1268,8 +1262,8 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
/* 0 means that the AD commands are sent */
err = send_dux_commands(udfs, SENDADCOMMANDS);
if (err < 0) {
- printk(KERN_ERR "comedi%d: adc command could not be submitted."
- "Aborting...\n", dev->minor);
+ dev_err(dev->class_dev,
+ "adc command could not be submitted. Aborting...\n");
up(&udfs->sem);
return err;
}
@@ -1284,8 +1278,7 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
udfs->transfer_buffer, SIZEINBUF,
&actual_length, 10000);
if (err < 0) {
- printk(KERN_ERR "comedi%d: insn timeout. No data.\n",
- dev->minor);
+ dev_err(dev->class_dev, "insn timeout. No data.\n");
up(&udfs->sem);
return err;
}
@@ -1297,15 +1290,13 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
udfs->transfer_buffer, SIZEINBUF,
&actual_length, 10000);
if (err < 0) {
- printk(KERN_ERR "comedi%d: insn data error: %d\n",
- dev->minor, err);
+ dev_err(dev->class_dev, "insn data error: %d\n", err);
up(&udfs->sem);
return err;
}
n = actual_length / sizeof(uint16_t);
if ((n % 16) != 0) {
- printk(KERN_ERR "comedi%d: insn data packet "
- "corrupted.\n", dev->minor);
+ dev_err(dev->class_dev, "insn data packet corrupted.\n");
up(&udfs->sem);
return -EINVAL;
}
@@ -1535,8 +1526,8 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,
int ret;

if (udev->speed != USB_SPEED_HIGH) {
- printk(KERN_ERR "comedi_: usbduxfast_: This driver needs"
- "USB 2.0 to operate. Aborting...\n");
+ dev_err(&udev->dev,
+ "This driver needs USB 2.0 to operate. Aborting...\n");
return -ENODEV;
}
#ifdef CONFIG_COMEDI_DEBUG
@@ -1555,7 +1546,8 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,

/* no more space */
if (index == -1) {
- printk(KERN_ERR "Too many usbduxfast-devices connected.\n");
+ dev_err(&udev->dev,
+ "Too many usbduxfast-devices connected.\n");
up(&start_stop_sem);
return -EMFILE;
}
@@ -1586,8 +1578,8 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,
usbduxfastsub[index].dux_commands = kmalloc(SIZEOFDUXBUFFER,
GFP_KERNEL);
if (!usbduxfastsub[index].dux_commands) {
- printk(KERN_ERR "comedi_: usbduxfast: error alloc space for "
- "dac commands\n");
+ dev_err(&udev->dev,
+ "error alloc space for dac commands\n");
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1595,8 +1587,8 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,
/* create space of the instruction buffer */
usbduxfastsub[index].insnBuffer = kmalloc(SIZEINSNBUF, GFP_KERNEL);
if (!usbduxfastsub[index].insnBuffer) {
- printk(KERN_ERR "comedi_: usbduxfast: could not alloc space "
- "for insnBuffer\n");
+ dev_err(&udev->dev,
+ "could not alloc space for insnBuffer\n");
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1605,24 +1597,25 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,
i = usb_set_interface(usbduxfastsub[index].usbdev,
usbduxfastsub[index].ifnum, 1);
if (i < 0) {
- printk(KERN_ERR "comedi_: usbduxfast%d: could not switch to "
- "alternate setting 1.\n", index);
+ dev_err(&udev->dev,
+ "usbduxfast%d: could not switch to alternate setting 1.\n",
+ index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENODEV;
}
usbduxfastsub[index].urbIn = usb_alloc_urb(0, GFP_KERNEL);
if (!usbduxfastsub[index].urbIn) {
- printk(KERN_ERR "comedi_: usbduxfast%d: Could not alloc."
- "urb\n", index);
+ dev_err(&udev->dev,
+ "usbduxfast%d: Could not alloc. urb\n", index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
}
usbduxfastsub[index].transfer_buffer = kmalloc(SIZEINBUF, GFP_KERNEL);
if (!usbduxfastsub[index].transfer_buffer) {
- printk(KERN_ERR "comedi_: usbduxfast%d: could not alloc. "
- "transb.\n", index);
+ dev_err(&udev->dev,
+ "usbduxfast%d: could not alloc. transb.\n", index);
tidy_up(&(usbduxfastsub[index]));
up(&start_stop_sem);
return -ENOMEM;
@@ -1644,8 +1637,8 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf,
return ret;
}

- printk(KERN_INFO "comedi_: usbduxfast%d has been successfully "
- "initialized.\n", index);
+ dev_info(&udev->dev,
+ "usbduxfast%d has been successfully initialized.\n", index);
/* success */
return 0;
}
@@ -1656,13 +1649,11 @@ static void usbduxfast_usb_disconnect(struct usb_interface *intf)
struct usb_device *udev = interface_to_usbdev(intf);

if (!udfs) {
- printk(KERN_ERR "comedi_: usbduxfast: disconnect called with "
- "null pointer.\n");
+ dev_err(&intf->dev, "disconnect called with null pointer.\n");
return;
}
if (udfs->usbdev != udev) {
- printk(KERN_ERR "comedi_: usbduxfast: BUG! called with wrong "
- "ptr!!!\n");
+ dev_err(&intf->dev, "BUG! called with wrong ptr!!!\n");
return;
}

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/