[PATCH 4/4] net: calxedaxgmac: enable rx cut-thru mode

[Rob Herring]

From: Rob Herring <rob.herring@xxxxxxxxxxx>

Enabling RX cut-thru mode yields better performance as received frames
start getting written to memory before a whole frame is received.

Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx>
---
 drivers/net/ethernet/calxeda/xgmac.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index abb8f40..2b4b4f5 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -264,7 +264,7 @@
 #define XGMAC_OMR_FEF		0x00000080	/* Forward Error Frames */
 #define XGMAC_OMR_DT		0x00000040	/* Drop TCP/IP csum Errors */
 #define XGMAC_OMR_RSF		0x00000020	/* RX FIFO Store and Forward */
-#define XGMAC_OMR_RTC		0x00000010	/* RX Threshhold Ctrl */
+#define XGMAC_OMR_RTC_256	0x00000018	/* RX Threshhold Ctrl */
 #define XGMAC_OMR_RTC_MASK	0x00000018	/* RX Threshhold Ctrl MASK */
 
 /* XGMAC HW Features Register */
@@ -982,7 +982,8 @@ static int xgmac_hw_init(struct net_device *dev)
 	writel(value, ioaddr + XGMAC_DMA_CONTROL);
 
 	/* Set the HW DMA mode and the COE */
-	writel(XGMAC_OMR_TSF | XGMAC_OMR_RSF | XGMAC_OMR_RFD | XGMAC_OMR_RFA,
+	writel(XGMAC_OMR_TSF | XGMAC_OMR_RFD | XGMAC_OMR_RFA |
+		XGMAC_OMR_RTC_256,
 		ioaddr + XGMAC_OMR);
 
 	/* Reset the MMC counters */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/