[PATCH v16 07/10]USB/ppc4xx: Add Synopsys DWC OTG PCD function
From: Rupjyoti Sarmah
Date: Thu May 03 2012 - 08:37:06 EST
The PCD is responsible for translating requests from the gadget driver
to appropriate actions on the DWC OTG controller.
Signed-off-by: Rupjyoti Sarmah <rsarmah@xxxxxxx>
Signed-off-by: Tirumala R Marri <tmarri@xxxxxxx>
Signed-off-by: Fushen Chen <fchen@xxxxxxx>
Signed-off-by: Mark Miesfeld <mmiesfeld@xxxxxxx>
---
drivers/usb/dwc/pcd.c | 1817 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/dwc/pcd.h | 139 ++++
2 files changed, 1956 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/dwc/pcd.c
create mode 100644 drivers/usb/dwc/pcd.h
diff --git a/drivers/usb/dwc/pcd.c b/drivers/usb/dwc/pcd.c
new file mode 100644
index 0000000..f486d2d
--- /dev/null
+++ b/drivers/usb/dwc/pcd.c
@@ -0,0 +1,1817 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@xxxxxxx>
+ * Modified by Stefan Roese <sr@xxxxxxx>, DENX Software Engineering
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * This file implements the Peripheral Controller Driver.
+ *
+ * The Peripheral Controller Driver (PCD) is responsible for
+ * translating requests from the Function Driver into the appropriate
+ * actions on the DWC_otg controller. It isolates the Function Driver
+ * from the specifics of the controller by providing an API to the
+ * Function Driver.
+ *
+ * The Peripheral Controller Driver for Linux will implement the
+ * Gadget API, so that the existing Gadget drivers can be used.
+ * (Gadget Driver is the Linux terminology for a Function Driver.)
+ *
+ * The Linux Gadget API is defined in the header file linux/usb/gadget.h. The
+ * USB EP operations API is defined in the structure usb_ep_ops and the USB
+ * Controller API is defined in the structure usb_gadget_ops
+ *
+ * An important function of the PCD is managing interrupts generated
+ * by the DWC_otg controller. The implementation of the DWC_otg device
+ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+
+#include "pcd.h"
+
+/*
+ * Static PCD pointer for use in usb_gadget_register_driver and
+ * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
+ */
+static struct dwc_pcd *s_pcd;
+
+static inline int need_stop_srp_timer(struct core_if *core_if)
+{
+ if (core_if->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS ||
+ !core_if->core_params->i2c_enable)
+ return core_if->srp_timer_started ? 1 : 0;
+ return 0;
+}
+
+/**
+ * Tests if the module is set to FS or if the PHY_TYPE is FS. If so, then the
+ * gadget should not report as dual-speed capable.
+ */
+static inline int check_is_dual_speed(struct core_if *core_if)
+{
+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL ||
+ (DWC_HWCFG2_HS_PHY_TYPE_RD(core_if->hwcfg2) == 2 &&
+ DWC_HWCFG2_P_2_P_RD(core_if->hwcfg2) == 1 &&
+ core_if->core_params->ulpi_fs_ls))
+ return 0;
+ return 1;
+}
+
+/**
+ * Tests if driver is OTG capable.
+ */
+static inline int check_is_otg(struct core_if *core_if)
+{
+ if (DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) ==
+ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+ DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) ==
+ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST ||
+ DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) ==
+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+ DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) ==
+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
+ return 0;
+ return 1;
+}
+
+/**
+ * This function completes a request. It calls the request call back.
+ */
+void request_done(struct pcd_ep *ep, struct pcd_request *req, int status)
+{
+ unsigned stopped = ep->stopped;
+
+ list_del_init(&req->queue);
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (GET_CORE_IF(ep->pcd)->dma_enable) {
+ if (req->mapped) {
+ dma_unmap_single(ep->pcd->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep->dwc_ep.is_in ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else {
+ dma_sync_single_for_cpu(ep->pcd->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep->dwc_ep.
+ is_in ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ }
+ }
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ spin_unlock(&ep->pcd->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&ep->pcd->lock);
+
+ if (ep->pcd->request_pending > 0)
+ --ep->pcd->request_pending;
+ ep->stopped = stopped;
+
+ /*
+ * Added-sr: 2007-07-26
+ *
+ * Finally, when the current request is done, mark this endpoint
+ * as not active, so that new requests can be processed.
+ */
+ if (dwc_has_feature(GET_CORE_IF(ep->pcd), DWC_LIMITED_XFER))
+ ep->dwc_ep.active = 0;
+}
+
+/**
+ * This function terminates all the requsts in the EP request queue.
+ */
+void request_nuke(struct pcd_ep *ep)
+{
+ struct pcd_request *req;
+
+ ep->stopped = 1;
+
+ /* called with irqs blocked?? */
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pcd_request, queue);
+ request_done(ep, req, -ESHUTDOWN);
+ }
+}
+
+/*
+ * The following sections briefly describe the behavior of the Gadget
+ * API endpoint operations implemented in the DWC_otg driver
+ * software. Detailed descriptions of the generic behavior of each of
+ * these functions can be found in the Linux header file
+ * include/linux/usb_gadget.h.
+ *
+ * The Gadget API provides wrapper functions for each of the function
+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
+ * function, which then calls the underlying PCD function. The
+ * following sections are named according to the wrapper
+ * functions. Within each section, the corresponding DWC_otg PCD
+ * function name is specified.
+ *
+ */
+
+/**
+ * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO
+ * mode
+ */
+static u32 assign_perio_tx_fifo(struct core_if *core_if)
+{
+ u32 mask = 1;
+ u32 i;
+
+ for (i = 0; i < DWC_HWCFG4_NUM_DEV_PERIO_IN_EP_RD(core_if->hwcfg4);
+ ++i) {
+ if (!(mask & core_if->p_tx_msk)) {
+ core_if->p_tx_msk |= mask;
+ return i + 1;
+ }
+ mask <<= 1;
+ }
+ return 0;
+}
+
+/**
+ * This function releases periodic Tx FIFO in shared Tx FIFO mode
+ */
+static void release_perio_tx_fifo(struct core_if *core_if, u32 fifo_num)
+{
+ core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1)))
+ ^ core_if->p_tx_msk;
+}
+
+/**
+ * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO
+ * mode
+ */
+static u32 assign_tx_fifo(struct core_if *core_if)
+{
+ u32 mask = 1;
+ u32 i;
+
+ for (i = 0; i < DWC_HWCFG4_NUM_IN_EPS_RD(core_if->hwcfg4); ++i) {
+ if (!(mask & core_if->tx_msk)) {
+ core_if->tx_msk |= mask;
+ return i + 1;
+ }
+ mask <<= 1;
+ }
+ return 0;
+}
+
+/**
+ * This function releases periodic Tx FIFO in shared Tx FIFO mode
+ */
+static void release_tx_fifo(struct core_if *core_if, u32 fifo_num)
+{
+ core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1)))
+ ^ core_if->tx_msk;
+}
+
+/**
+ * Sets an in endpoint's tx fifo based on the hardware configuration.
+ */
+static void set_in_ep_tx_fifo(struct dwc_pcd *pcd, struct pcd_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ if (pcd->otg_dev->core_if->en_multiple_tx_fifo) {
+ ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
+ } else {
+ ep->dwc_ep.tx_fifo_num = 0;
+
+ /* If ISOC EP then assign a Periodic Tx FIFO. */
+ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC)
+ ep->dwc_ep.tx_fifo_num =
+ assign_perio_tx_fifo(pcd->otg_dev->core_if);
+ }
+}
+
+/**
+ * This function activates an EP. The Device EP control register for
+ * the EP is configured as defined in the ep structure. Note: This function is
+ * not used for EP0.
+ */
+void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep)
+{
+ struct device_if *dev_if = core_if->dev_if;
+ u32 depctl = 0;
+ ulong addr;
+ u32 daintmsk = 0;
+
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1) {
+ addr = dev_if->in_ep_regs[ep->num] + DWC_DIEPCTL;
+ daintmsk = DWC_DAINTMSK_IN_EP_RW(daintmsk, ep->num);
+ } else {
+ addr = dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL;
+ daintmsk = DWC_DAINTMSK_OUT_EP_RW(daintmsk, ep->num);
+ }
+
+ /* If the EP is already active don't change the EP Control register */
+ depctl = dwc_reg_read(addr, 0);
+ if (!DWC_DEPCTL_ACT_EP_RD(depctl)) {
+ depctl = DWC_DEPCTL_MPS_RW(depctl, ep->maxpacket);
+ depctl = DWC_DEPCTL_EP_TYPE_RW(depctl, ep->type);
+ depctl = DWC_DEPCTL_TX_FIFO_NUM_RW(depctl, ep->tx_fifo_num);
+ depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1);
+ depctl = DWC_DEPCTL_ACT_EP_RW(depctl, 1);
+ dwc_reg_write(addr, 0, depctl);
+ }
+
+ /* Enable the Interrupt for this EP */
+ dwc_reg_modify(dev_if->dev_global_regs, DWC_DAINTMSK, 0, daintmsk);
+ ep->stall_clear_flag = 0;
+}
+
+/**
+ * This function is called by the Gadget Driver for each EP to be
+ * configured for the current configuration (SET_CONFIGURATION).
+ *
+ * This function initializes the dwc_otg_ep_t data structure, and then
+ * calls dwc_otg_ep_activate.
+ */
+static int dwc_otg_pcd_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct pcd_ep *ep;
+ struct dwc_pcd *pcd;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct pcd_ep, ep);
+ if (!_ep || !desc || ep->desc || desc->bDescriptorType !=
+ USB_DT_ENDPOINT) {
+ pr_warning("%s, bad ep or descriptor\n", __func__);
+ return -EINVAL;
+ }
+
+ if (ep == &ep->pcd->ep0) {
+ pr_warning("%s, bad ep(0)\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Check FIFO size */
+ if (!desc->wMaxPacketSize) {
+ pr_warning("%s, bad %s maxpacket\n", __func__, _ep->name);
+ return -ERANGE;
+ }
+
+ pcd = ep->pcd;
+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+ pr_warning("%s, bogus device state\n", __func__);
+ return -ESHUTDOWN;
+ }
+
+ spin_lock_irqsave(&pcd->lock, flags);
+ ep->desc = desc;
+ ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* Activate the EP */
+ ep->stopped = 0;
+ ep->wedged = 0;
+ ep->dwc_ep.is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+ ep->dwc_ep.maxpacket = ep->ep.maxpacket;
+ ep->dwc_ep.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (ep->dwc_ep.is_in)
+ set_in_ep_tx_fifo(pcd, ep, desc);
+
+ /* Set initial data PID. */
+ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)
+ ep->dwc_ep.data_pid_start = 0;
+
+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
+ spin_unlock_irqrestore(&pcd->lock, flags);
+ return 0;
+}
+
+/**
+ * This function deactivates an EP. This is done by clearing the USB Active EP
+ * bit in the Device EP control register. Note: This function is not used for
+ * EP0. EP0 cannot be deactivated.
+ */
+static void dwc_otg_ep_deactivate(struct core_if *core_if, struct dwc_ep *ep)
+{
+ u32 depctl = 0;
+ ulong addr;
+ u32 daintmsk = 0;
+
+ /* Read DEPCTLn register */
+ if (ep->is_in == 1) {
+ addr = core_if->dev_if->in_ep_regs[ep->num] + DWC_DIEPCTL;
+ daintmsk = DWC_DAINTMSK_IN_EP_RW(daintmsk, ep->num);
+ } else {
+ addr =
+ core_if->dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL;
+ daintmsk = DWC_DAINTMSK_OUT_EP_RW(daintmsk, ep->num);
+ }
+
+ depctl = DWC_DEPCTL_ACT_EP_RW(depctl, 0);
+ dwc_reg_write(addr, 0, depctl);
+
+ /* Disable the Interrupt for this EP */
+ dwc_reg_modify(core_if->dev_if->dev_global_regs, DWC_DAINTMSK,
+ daintmsk, 0);
+}
+/**
+ *dwc_otg_ep_disable disables the EP as per specification. To be called
+ *during stall and disable self
+ */
+static void dwc_otg_ep_disable(struct core_if *core_if, struct dwc_ep *ep)
+{
+ u32 regs, diepctl, diepint;
+
+ regs = core_if->dev_if->in_ep_regs[ep->num];
+
+ /* Disable endpoint */
+ diepctl = dwc_reg_read(regs + DWC_DIEPCTL, 0);
+ diepctl = DWC_DEPCTL_SET_NAK_RW(diepctl, 1);
+ dwc_reg_write(regs + DWC_DIEPCTL, 0, diepctl);
+ diepint = dwc_reg_read(regs + DWC_DIEPINT, 0);
+ while (DWC_DIEPINT_IN_EP_NAK_RD(diepint) == 0)
+ diepint = dwc_reg_read(regs + DWC_DIEPINT, 0);
+ diepctl = DWC_DEPCTL_EPDIS_RW(diepctl, 1);
+ dwc_reg_write(regs + DWC_DIEPCTL, 0, diepctl);
+
+ /* Clear epdisabled , NAK effective*/
+ while (DWC_DIEPINT_EP_DISA_RD(diepint) == 0)
+ diepint = dwc_reg_read(regs + DWC_DIEPINT,0);
+ diepint = DWC_DIEPINT_EP_DISA_RW(diepint, 1);
+ diepint = DWC_DIEPINT_IN_EP_NAK_RW(diepint, 1);
+ dwc_reg_write(regs + DWC_DIEPINT, 0, diepint);
+}
+
+/**
+ * This function is called when an EP is disabled due to disconnect or
+ * change in configuration. Any pending requests will terminate with a
+ * status of -ESHUTDOWN.
+ *
+ * This function modifies the dwc_otg_ep_t data structure for this EP,
+ * and then calls dwc_otg_ep_deactivate.
+ */
+static int dwc_otg_pcd_ep_disable(struct usb_ep *_ep)
+{
+ struct pcd_ep *ep;
+ struct core_if *core_if;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct pcd_ep, ep);
+ if (!_ep || !ep->desc)
+ return -EINVAL;
+
+ core_if = ep->pcd->otg_dev->core_if;
+
+ spin_lock_irqsave(&ep->pcd->lock, flags);
+
+ request_nuke(ep);
+ dwc_otg_ep_deactivate(core_if, &ep->dwc_ep);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+ if (ep->dwc_ep.is_in) {
+ release_perio_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num);
+ release_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num);
+ }
+ dwc_otg_ep_deactivate(core_if, &ep->dwc_ep);
+ spin_unlock_irqrestore(&ep->pcd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * This function allocates a request object to use with the specified
+ * endpoint.
+ */
+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *_ep,
+ gfp_t gfp_flags)
+{
+ struct pcd_request *req;
+
+ if (!_ep) {
+ pr_warning("%s() Invalid EP\n", __func__);
+ return NULL;
+ }
+
+ req = kzalloc(sizeof(struct pcd_request), gfp_flags);
+ if (!req) {
+ pr_warning("%s() request allocation failed\n", __func__);
+ return NULL;
+ }
+
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+/**
+ * This function frees a request object.
+ */
+static void dwc_otg_pcd_free_request(struct usb_ep *_ep,
+ struct usb_request *_req)
+{
+ struct pcd_request *req;
+
+ if (!_ep || !_req) {
+ pr_warning("%s() nvalid ep or req argument\n", __func__);
+ return;
+ }
+
+ req = container_of(_req, struct pcd_request, req);
+ kfree(req);
+}
+
+/*
+ * In dedicated Tx FIFO mode, enable the Non-Periodic Tx FIFO empty interrupt.
+ * Otherwise, enable the Tx FIFO epmty interrupt. The data will be written into
+ * the fifo by the ISR.
+ */
+static void enable_tx_fifo_empty_intr(struct core_if *c_if, struct dwc_ep *ep)
+{
+ u32 intr_mask = 0;
+ struct device_if *d_if = c_if->dev_if;
+ ulong global_regs = c_if->core_global_regs;
+
+ if (!c_if->en_multiple_tx_fifo) {
+ intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT;
+ dwc_reg_modify(global_regs, DWC_GINTSTS, intr_mask, 0);
+ dwc_reg_modify(global_regs, DWC_GINTMSK, intr_mask, intr_mask);
+ } else if (ep->xfer_len) {
+ /* Enable the Tx FIFO Empty Interrupt for this EP */
+ u32 fifoemptymsk = 1 << ep->num;
+ dwc_reg_modify(d_if->dev_global_regs,
+ DWC_DTKNQR4FIFOEMPTYMSK, 0, fifoemptymsk);
+ }
+}
+
+static void set_next_ep(struct device_if *dev_if, u8 num)
+{
+ u32 depctl = 0;
+
+ depctl = dwc_reg_read(dev_if->in_ep_regs[0], 0) + DWC_DIEPCTL;
+ depctl = DWC_DEPCTL_NXT_EP_RW(depctl, num);
+
+ dwc_reg_write((dev_if->in_ep_regs[0]), DWC_DIEPCTL, depctl);
+}
+
+/**
+ * This function does the setup for a data transfer for an EP and
+ * starts the transfer. For an IN transfer, the packets will be loaded into the
+ * appropriate Tx FIFO in the ISR. For OUT transfers, the packets are unloaded
+ * from the Rx FIFO in the ISR.
+ *
+ */
+void dwc_otg_ep_start_transfer(struct core_if *c_if, struct dwc_ep *ep)
+{
+ u32 depctl = 0;
+ u32 deptsiz = 0;
+ struct device_if *d_if = c_if->dev_if;
+ ulong glbl_regs = c_if->core_global_regs;
+
+ if (ep->is_in) {
+ ulong in_regs = d_if->in_ep_regs[ep->num];
+ u32 gtxstatus;
+
+ gtxstatus = dwc_reg_read(glbl_regs, DWC_GNPTXSTS);
+ if (!c_if->en_multiple_tx_fifo
+ && !DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(gtxstatus))
+ return;
+
+ depctl = dwc_reg_read(in_regs, DWC_DIEPCTL);
+ deptsiz = dwc_reg_read(in_regs, DWC_DIEPTSIZ);
+
+ /* Zero Length Packet? */
+ if (!ep->xfer_len) {
+ deptsiz = DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, 0);
+ deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, 1);
+ } else {
+ /*
+ * Program the transfer size and packet count as
+ * follows:
+ *
+ * xfersize = N * maxpacket + short_packet
+ * pktcnt = N + (short_packet exist ? 1 : 0)
+ */
+
+ /*
+ * Added-sr: 2007-07-26
+ *
+ * Since the 405EZ (Ultra) only support 2047 bytes as
+ * max transfer size, we have to split up bigger
+ * transfers into multiple transfers of 1024 bytes sized
+ * messages. I happens often, that transfers of 4096
+ * bytes are required (zero-gadget,
+ * file_storage-gadget).
+ */
+ if (dwc_has_feature(c_if, DWC_LIMITED_XFER)) {
+ if (ep->xfer_len > MAX_XFER_LEN) {
+ ep->bytes_pending = ep->xfer_len
+ - MAX_XFER_LEN;
+ ep->xfer_len = MAX_XFER_LEN;
+ }
+ }
+
+ deptsiz =
+ DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, ep->xfer_len);
+ deptsiz =
+ DWC_DEPTSIZ_PKT_CNT_RW(deptsiz,
+ ((ep->xfer_len - 1 +
+ ep->maxpacket) /
+ ep->maxpacket));
+ }
+ dwc_reg_write(in_regs, DWC_DIEPTSIZ, deptsiz);
+
+ if (c_if->dma_enable)
+ dwc_reg_write(in_regs, DWC_DIEPDMA, ep->dma_addr);
+ else if (ep->type != DWC_OTG_EP_TYPE_ISOC)
+ enable_tx_fifo_empty_intr(c_if, ep);
+
+ /* EP enable, IN data in FIFO */
+ depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1);
+ depctl = DWC_DEPCTL_EPENA_RW(depctl, 1);
+ dwc_reg_write(in_regs, DWC_DIEPCTL, depctl);
+
+ if (c_if->dma_enable)
+ set_next_ep(d_if, ep->num);
+ } else {
+ u32 out_regs = d_if->out_ep_regs[ep->num];
+
+ depctl = dwc_reg_read(out_regs, DWC_DOEPCTL);
+ deptsiz = dwc_reg_read(out_regs, DWC_DOEPTSIZ);
+
+ /*
+ * Program the transfer size and packet count as follows:
+ *
+ * pktcnt = N
+ * xfersize = N * maxpacket
+ */
+ if (!ep->xfer_len) {
+ deptsiz =
+ DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, ep->maxpacket);
+ deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, 1);
+ } else {
+ deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz,
+ ((ep->xfer_len +
+ ep->maxpacket -
+ 1) / ep->maxpacket));
+ deptsiz =
+ DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz,
+ DWC_DEPTSIZ_PKT_CNT_RD
+ (deptsiz) * ep->maxpacket);
+ }
+ dwc_reg_write(out_regs, DWC_DOEPTSIZ, deptsiz);
+
+ if (c_if->dma_enable)
+ dwc_reg_write(out_regs, DWC_DOEPDMA, ep->dma_addr);
+
+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
+ if (ep->even_odd_frame)
+ depctl = DWC_DEPCTL_SET_DATA1_PID_RW(depctl, 1);
+ else
+ depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1);
+ }
+
+ /* EP enable */
+ depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1);
+ depctl = DWC_DEPCTL_EPENA_RW(depctl, 1);
+ dwc_reg_write(out_regs, DWC_DOEPCTL, depctl);
+ }
+}
+
+/**
+ * This function does the setup for a data transfer for EP0 and starts
+ * the transfer. For an IN transfer, the packets will be loaded into
+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
+ * unloaded from the Rx FIFO in the ISR.
+ */
+void dwc_otg_ep0_start_transfer(struct core_if *c_if, struct dwc_ep *ep)
+{
+ u32 depctl = 0;
+ u32 deptsiz = 0;
+ struct device_if *d_if = c_if->dev_if;
+ ulong glbl_regs = c_if->core_global_regs;
+
+ ep->total_len = ep->xfer_len;
+
+ if (ep->is_in) {
+ ulong in_regs = d_if->in_ep_regs[0];
+ u32 gtxstatus;
+
+ gtxstatus = dwc_reg_read(glbl_regs, DWC_GNPTXSTS);
+
+ if (!c_if->en_multiple_tx_fifo
+ && !DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(gtxstatus))
+ return;
+
+ depctl = dwc_reg_read(in_regs, DWC_DIEPCTL);
+ deptsiz = dwc_reg_read(in_regs, DWC_DIEPTSIZ);
+
+ /* Zero Length Packet? */
+ if (!ep->xfer_len) {
+ deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, 0);
+ deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1);
+ } else {
+ /*
+ * Program the transfer size and packet count as
+ * follows:
+ *
+ * xfersize = N * maxpacket + short_packet
+ * pktcnt = N + (short_packet exist ? 1 : 0)
+ */
+ if (ep->xfer_len > ep->maxpacket) {
+ ep->xfer_len = ep->maxpacket;
+ deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+ ep->
+ maxpacket);
+ } else {
+ deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+ ep->
+ xfer_len);
+ }
+ deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1);
+ }
+ dwc_reg_write(in_regs, DWC_DIEPTSIZ, deptsiz);
+
+ if (c_if->dma_enable)
+ dwc_reg_write(in_regs, DWC_DIEPDMA, ep->dma_addr);
+
+ /* EP enable, IN data in FIFO */
+ depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1);
+ depctl = DWC_DEPCTL_EPENA_RW(depctl, 1);
+ dwc_reg_write(in_regs, DWC_DIEPCTL, depctl);
+
+ if (!c_if->dma_enable)
+ enable_tx_fifo_empty_intr(c_if, ep);
+ } else {
+ ulong out_regs = d_if->out_ep_regs[ep->num];
+
+ depctl = dwc_reg_read(out_regs, DWC_DOEPCTL);
+ deptsiz = dwc_reg_read(out_regs, DWC_DOEPTSIZ);
+
+ /*
+ * Program the transfer size and packet count as follows:
+ *
+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
+ * pktcnt = N
+ */
+ if (!ep->xfer_len) {
+ deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+ ep->maxpacket);
+ deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1);
+ } else {
+ deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz,
+ (ep->xfer_len +
+ ep->maxpacket -
+ 1) / ep->maxpacket);
+ deptsiz =
+ DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz,
+ DWC_DEPTSIZ_PKT_CNT_RD
+ (deptsiz) * ep->maxpacket);
+ }
+ dwc_reg_write(out_regs, DWC_DOEPTSIZ, deptsiz);
+
+ if (c_if->dma_enable)
+ dwc_reg_write(out_regs, DWC_DOEPDMA, ep->dma_addr);
+
+ /* EP enable */
+ depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1);
+ depctl = DWC_DEPCTL_EPENA_RW(depctl, 1);
+ dwc_reg_write(out_regs, DWC_DOEPCTL, depctl);
+ }
+}
+
+/**
+ * This function is used to submit an I/O Request to an EP.
+ *
+ * - When the request completes the request's completion callback
+ * is called to return the request to the driver.
+ * - An EP, except control EPs, may have multiple requests
+ * pending.
+ * - Once submitted the request cannot be examined or modified.
+ * - Each request is turned into one or more packets.
+ * - A BULK EP can queue any amount of data; the transfer is
+ * packetized.
+ * - Zero length Packets are specified with the request 'zero'
+ * flag.
+ */
+static int dwc_otg_pcd_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct pcd_request *req;
+ struct pcd_ep *ep;
+ struct dwc_pcd *pcd;
+ struct core_if *core_if;
+ unsigned long flags;
+
+ req = container_of(_req, struct pcd_request, req);
+ if (!_req || !_req->complete || !_req->buf ||
+ !list_empty(&req->queue)) {
+ pr_warning("%s, bad params\n", __func__);
+ return -EINVAL;
+ }
+
+ ep = container_of(_ep, struct pcd_ep, ep);
+ if (!_ep || (!ep->desc && ep->dwc_ep.num != 0)) {
+ pr_warning("%s, bad ep\n", __func__);
+ return -EINVAL;
+ }
+
+ pcd = ep->pcd;
+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+ pr_warning("%s, bogus device state\n", __func__);
+ return -ESHUTDOWN;
+ }
+ core_if = pcd->otg_dev->core_if;
+
+ if (GET_CORE_IF(pcd)->dma_enable) {
+ if (_req->dma == DMA_ADDR_INVALID) {
+ _req->dma = dma_map_single(pcd->gadget.dev.parent,
+ _req->buf, _req->length,
+ ep->dwc_ep.
+ is_in ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ req->mapped = 1;
+ } else {
+ dma_sync_single_for_device(pcd->gadget.dev.parent,
+ _req->dma, _req->length,
+ ep->dwc_ep.
+ is_in ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ req->mapped = 0;
+ }
+ }
+
+ spin_lock_irqsave(&ep->pcd->lock, flags);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ /* Start the transfer */
+ if (list_empty(&ep->queue) && !ep->stopped) {
+ /* EP0 Transfer? */
+ if (ep->dwc_ep.num == 0) {
+ switch (pcd->ep0state) {
+ case EP0_IN_DATA_PHASE:
+ break;
+ case EP0_OUT_DATA_PHASE:
+ if (pcd->request_config) {
+ /* Complete STATUS PHASE */
+ ep->dwc_ep.is_in = 1;
+ pcd->ep0state = EP0_STATUS;
+ }
+ break;
+ default:
+ spin_unlock_irqrestore(&pcd->lock, flags);
+ return -EL2HLT;
+ }
+
+ ep->dwc_ep.dma_addr = _req->dma;
+ ep->dwc_ep.start_xfer_buff = _req->buf;
+ ep->dwc_ep.xfer_buff = _req->buf;
+ ep->dwc_ep.xfer_len = _req->length;
+ ep->dwc_ep.xfer_count = 0;
+ ep->dwc_ep.sent_zlp = 0;
+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
+
+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
+ } else {
+ /* Setup and start the Transfer */
+ ep->dwc_ep.dma_addr = _req->dma;
+ ep->dwc_ep.start_xfer_buff = _req->buf;
+ ep->dwc_ep.xfer_buff = _req->buf;
+ ep->dwc_ep.xfer_len = _req->length;
+ ep->dwc_ep.xfer_count = 0;
+ ep->dwc_ep.sent_zlp = 0;
+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
+
+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
+ }
+ }
+
+ if (req) {
+ ++pcd->request_pending;
+ list_add_tail(&req->queue, &ep->queue);
+
+ if (ep->dwc_ep.is_in && ep->stopped && !core_if->dma_enable) {
+ /*
+ * Device IN endpoint interrupt mask register is laid
+ * out exactly the same as the device IN endpoint
+ * interrupt register.
+ */
+ u32 diepmsk = 0;
+ diepmsk = DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(diepmsk, 1);
+
+ dwc_reg_modify(core_if->dev_if->dev_global_regs,
+ DWC_DIEPMSK, 0, diepmsk);
+ }
+ }
+
+ spin_unlock_irqrestore(&pcd->lock, flags);
+ return 0;
+}
+
+/**
+ * This function cancels an I/O request from an EP.
+ */
+static int dwc_otg_pcd_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pcd_request *req;
+ struct pcd_ep *ep;
+ struct dwc_pcd *pcd;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct pcd_ep, ep);
+ if (!_ep || !_req || (!ep->desc && ep->dwc_ep.num != 0)) {
+ pr_warning("%s, bad argument\n", __func__);
+ return -EINVAL;
+ }
+
+ pcd = ep->pcd;
+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
+ pr_warning("%s, bogus device state\n", __func__);
+ return -ESHUTDOWN;
+ }
+
+ spin_lock_irqsave(&pcd->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue)
+ if (&req->req == _req)
+ break;
+
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&pcd->lock, flags);
+ return -EINVAL;
+ }
+
+ if (!list_empty(&req->queue))
+ request_done(ep, req, -ECONNRESET);
+ else
+ req = NULL;
+
+ spin_unlock_irqrestore(&pcd->lock, flags);
+
+ return req ? 0 : -EOPNOTSUPP;
+}
+
+/**
+ * Set the EP STALL.
+ */
+void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep)
+{
+ u32 depctl = 0;
+ ulong depctl_addr;
+
+ if (ep->is_in) {
+ depctl_addr =
+ (core_if->dev_if->in_ep_regs[ep->num]) + DWC_DIEPCTL;
+ depctl = dwc_reg_read(depctl_addr, 0);
+
+ /* set the disable and stall bits */
+ if (DWC_DEPCTL_EPENA_RD(depctl))
+ depctl = DWC_DEPCTL_EPDIS_RW(depctl, 1);
+ depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 1);
+ dwc_reg_write(depctl_addr, 0, depctl);
+ dwc_otg_ep_disable(core_if, ep);
+ } else {
+ depctl_addr =
+ (core_if->dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL);
+ depctl = dwc_reg_read(depctl_addr, 0);
+
+ /* set the stall bit */
+ depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 1);
+ dwc_reg_write(depctl_addr, 0, depctl);
+ }
+}
+
+/**
+ * Clear the EP STALL.
+ */
+void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep)
+{
+ u32 depctl = 0;
+ ulong depctl_addr;
+
+ if (ep->is_in == 1)
+ depctl_addr =
+ (core_if->dev_if->in_ep_regs[ep->num]) + DWC_DIEPCTL;
+ else
+ depctl_addr =
+ (core_if->dev_if->out_ep_regs[ep->num]) + DWC_DOEPCTL;
+
+ depctl = dwc_reg_read(depctl_addr, 0);
+
+ /* clear the stall bits */
+ depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 0);
+
+ /*
+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
+ * of whether an endpoint has the Halt feature set, a
+ * ClearFeature(ENDPOINT_HALT) request always results in the
+ * data toggle being reinitialized to DATA0.
+ */
+ if (ep->type == DWC_OTG_EP_TYPE_INTR ||
+ ep->type == DWC_OTG_EP_TYPE_BULK)
+ depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1);
+
+ dwc_reg_write(depctl_addr, 0, depctl);
+}
+
+/**
+ * usb_ep_set_halt stalls an endpoint.
+ *
+ * usb_ep_clear_halt clears an endpoint halt and resets its data
+ * toggle.
+ *
+ * Both of these functions are implemented with the same underlying
+ * function. The behavior depends on the val argument:
+ * - 0 means clear_halt.
+ * - 1 means set_halt,
+ * - 2 means clear stall lock flag.
+ * - 3 means set stall lock flag.
+ */
+static int dwc_otg_pcd_ep_set_halt_wedge(struct usb_ep *_ep,
+ int val, int wedged)
+{
+ int retval = 0;
+ unsigned long flags;
+ struct pcd_ep *ep;
+
+ ep = container_of(_ep, struct pcd_ep, ep);
+ if (!_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
+ ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ pr_warning("%s, bad ep\n", __func__);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ep->pcd->lock, flags);
+
+ if (ep->dwc_ep.is_in && !list_empty(&ep->queue)) {
+ pr_warning("%s() %s XFer In process\n", __func__, _ep->name);
+ retval = -EAGAIN;
+ } else if (val == 0) {
+ ep->wedged = 0;
+ dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep);
+ } else if (val == 1) {
+ if (ep->dwc_ep.num == 0)
+ ep->pcd->ep0state = EP0_STALL;
+ if (wedged)
+ ep->wedged = 1;
+
+ ep->stopped = 1;
+ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep);
+ } else if (val == 2) {
+ ep->dwc_ep.stall_clear_flag = 0;
+ } else if (val == 3) {
+ ep->dwc_ep.stall_clear_flag = 1;
+ }
+
+ spin_unlock_irqrestore(&ep->pcd->lock, flags);
+ return retval;
+}
+static int dwc_otg_pcd_ep_set_halt(struct usb_ep *_ep, int val)
+{
+ return dwc_otg_pcd_ep_set_halt_wedge(_ep, val, 0);
+}
+static int dwc_otg_pcd_ep_set_wedge(struct usb_ep *_ep)
+{
+ return dwc_otg_pcd_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
+ .enable = dwc_otg_pcd_ep_enable,
+ .disable = dwc_otg_pcd_ep_disable,
+ .alloc_request = dwc_otg_pcd_alloc_request,
+ .free_request = dwc_otg_pcd_free_request,
+ .queue = dwc_otg_pcd_ep_queue,
+ .dequeue = dwc_otg_pcd_ep_dequeue,
+ .set_halt = dwc_otg_pcd_ep_set_halt,
+ .set_wedge = dwc_otg_pcd_ep_set_wedge,
+ .fifo_status = NULL,
+ .fifo_flush = NULL,
+};
+
+/**
+ * Gets the current USB frame number from the DTS register. This is the frame
+ * number from the last SOF packet.
+ */
+static u32 dwc_otg_get_frame_number(struct core_if *core_if)
+{
+ u32 dsts;
+
+ dsts = dwc_reg_read(core_if->dev_if->dev_global_regs, DWC_DSTS);
+ return DWC_DSTS_SOFFN_RD(dsts);
+}
+
+/**
+ * The following gadget operations will be implemented in the DWC_otg
+ * PCD. Functions in the API that are not described below are not
+ * implemented.
+ *
+ * The Gadget API provides wrapper functions for each of the function
+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
+ * wrapper function, which then calls the underlying PCD function. The
+ * following sections are named according to the wrapper functions
+ * (except for ioctl, which doesn't have a wrapper function). Within
+ * each section, the corresponding DWC_otg PCD function name is
+ * specified.
+ *
+ */
+
+/**
+ *Gets the USB Frame number of the last SOF.
+ */
+static int dwc_otg_pcd_get_frame(struct usb_gadget *_gadget)
+{
+ if (!_gadget) {
+ return -ENODEV;
+ } else {
+ struct dwc_pcd *pcd;
+
+ pcd = container_of(_gadget, struct dwc_pcd, gadget);
+ dwc_otg_get_frame_number(GET_CORE_IF(pcd));
+ }
+
+ return 0;
+}
+
+/**
+ * This function is called when the SRP timer expires. The SRP should complete
+ * within 6 seconds.
+ */
+static void srp_timeout(unsigned long data)
+{
+ u32 gotgctl;
+ struct dwc_pcd *pcd = (struct dwc_pcd *)data;
+ struct core_if *core_if = pcd->otg_dev->core_if;
+ ulong addr = otg_ctl_reg(pcd);
+
+ gotgctl = dwc_reg_read(addr, 0);
+ core_if->srp_timer_started = 0;
+
+ if (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS &&
+ core_if->core_params->i2c_enable) {
+ pr_info("SRP Timeout\n");
+
+ if (core_if->srp_success && (gotgctl &
+ DWC_GCTL_BSESSION_VALID)) {
+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup)
+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->
+ p);
+
+ /* Clear Session Request */
+ gotgctl = 0;
+ gotgctl |= DWC_GCTL_SES_REQ;
+ dwc_reg_modify(addr, 0, gotgctl, 0);
+
+ core_if->srp_success = 0;
+ } else {
+ pr_err("Device not connected/responding\n");
+ gotgctl &= ~DWC_GCTL_SES_REQ;
+ dwc_reg_write(addr, 0, gotgctl);
+ }
+ } else if (gotgctl & DWC_GCTL_SES_REQ) {
+ pr_info("SRP Timeout\n");
+ pr_err("Device not connected/responding\n");
+
+ gotgctl &= ~DWC_GCTL_SES_REQ;
+ dwc_reg_write(addr, 0, gotgctl);
+ } else {
+ pr_info(" SRP GOTGCTL=%0x\n", gotgctl);
+ }
+}
+
+/**
+ * Start the SRP timer to detect when the SRP does not complete within
+ * 6 seconds.
+ */
+static void dwc_otg_pcd_start_srp_timer(struct dwc_pcd *pcd)
+{
+ struct timer_list *srp_timer = &pcd->srp_timer;
+
+ GET_CORE_IF(pcd)->srp_timer_started = 1;
+ init_timer(srp_timer);
+ srp_timer->function = srp_timeout;
+ srp_timer->data = (unsigned long)pcd;
+ srp_timer->expires = jiffies + (HZ * 6);
+
+ add_timer(srp_timer);
+}
+
+static void dwc_otg_pcd_initiate_srp(struct dwc_pcd *pcd)
+{
+ u32 mem;
+ u32 val;
+ ulong addr = otg_ctl_reg(pcd);
+
+ val = dwc_reg_read(addr, 0);
+ if (val & DWC_GCTL_SES_REQ) {
+ pr_err("Session Request Already active!\n");
+ return;
+ }
+
+ pr_notice("Session Request Initated\n");
+ mem = dwc_reg_read(addr, 0);
+ mem |= DWC_GCTL_SES_REQ;
+ dwc_reg_write(addr, 0, mem);
+
+ /* Start the SRP timer */
+ dwc_otg_pcd_start_srp_timer(pcd);
+ return;
+}
+
+static void dwc_otg_pcd_remote_wakeup(struct dwc_pcd *pcd, int set)
+{
+ u32 dctl = 0;
+ ulong addr = dev_ctl_reg(pcd);
+
+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
+ if (pcd->remote_wakeup_enable) {
+ if (set) {
+ dctl = DEC_DCTL_REMOTE_WAKEUP_SIG(dctl, 1);
+ dwc_reg_modify(addr, 0, 0, dctl);
+ msleep(20);
+ dwc_reg_modify(addr, 0, dctl, 0);
+ }
+ }
+ }
+}
+
+/**
+ * Initiates Session Request Protocol (SRP) to wakeup the host if no
+ * session is in progress. If a session is already in progress, but
+ * the device is suspended, remote wakeup signaling is started.
+ *
+ */
+static int dwc_otg_pcd_wakeup(struct usb_gadget *_gadget)
+{
+ unsigned long flags;
+ struct dwc_pcd *pcd;
+ u32 dsts;
+ u32 gotgctl;
+
+ if (!_gadget)
+ return -ENODEV;
+ else
+ pcd = container_of(_gadget, struct dwc_pcd, gadget);
+
+ spin_lock_irqsave(&pcd->lock, flags);
+
+ /*
+ * This function starts the Protocol if no session is in progress. If
+ * a session is already in progress, but the device is suspended,
+ * remote wakeup signaling is started.
+ */
+
+ /* Check if valid session */
+ gotgctl = dwc_reg_read(otg_ctl_reg(pcd), 0);
+ if (gotgctl & DWC_GCTL_BSESSION_VALID) {
+ /* Check if suspend state */
+ dsts = dwc_reg_read(dev_sts_reg(pcd), 0);
+ if (DWC_DSTS_SUSP_STS_RD(dsts))
+ dwc_otg_pcd_remote_wakeup(pcd, 1);
+ } else {
+ dwc_otg_pcd_initiate_srp(pcd);
+ }
+
+ spin_unlock_irqrestore(&pcd->lock, flags);
+ return 0;
+}
+
+static int dwc_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ struct dwc_pcd *pcd = container_of(gadget, struct dwc_pcd, gadget);
+
+ if (pcd->otg_dev->core_if->xceiv)
+ return -EOPNOTSUPP;
+
+ return otg_set_power(pcd->otg_dev->core_if->xceiv, mA);
+
+}
+static int dwc_gadget_start(struct usb_gadget_driver *driver,
+ int (*bind) (struct usb_gadget *));
+static int dwc_gadget_stop(struct usb_gadget_driver *driver);
+
+static const struct usb_gadget_ops dwc_otg_pcd_ops = {
+ .get_frame = dwc_otg_pcd_get_frame,
+ .wakeup = dwc_otg_pcd_wakeup,
+ .start = dwc_gadget_start,
+ .stop = dwc_gadget_stop,
+ .vbus_draw = dwc_gadget_vbus_draw,
+};
+
+/**
+ * This function updates the otg values in the gadget structure.
+ */
+void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset)
+{
+ if (!pcd->gadget.is_otg)
+ return;
+
+ if (reset) {
+ pcd->b_hnp_enable = 0;
+ pcd->a_hnp_support = 0;
+ pcd->a_alt_hnp_support = 0;
+ }
+
+ pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
+ pcd->gadget.a_hnp_support = pcd->a_hnp_support;
+ pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
+}
+
+/**
+ * This function is the top level PCD interrupt handler.
+ */
+static irqreturn_t dwc_otg_pcd_irq(int _irq, void *dev)
+{
+ struct dwc_pcd *pcd = dev;
+ int retval;
+
+ retval = dwc_otg_pcd_handle_intr(pcd);
+ return IRQ_RETVAL(retval);
+}
+
+/**
+ * PCD Callback function for initializing the PCD when switching to
+ * device mode.
+ */
+static int dwc_otg_pcd_start_cb(void *_p)
+{
+ struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+
+ /* Initialize the Core for Device mode. */
+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd)))
+ dwc_otg_core_dev_init(GET_CORE_IF(pcd));
+
+ return 1;
+}
+
+/**
+ * PCD Callback function for stopping the PCD when switching to Host
+ * mode.
+ */
+static int dwc_otg_pcd_stop_cb(void *_p)
+{
+ dwc_otg_pcd_stop((struct dwc_pcd *)_p);
+ return 1;
+}
+
+/**
+ * PCD Callback function for notifying the PCD when resuming from
+ * suspend.
+ *
+ * @param _p void pointer to the <code>struct dwc_pcd</code>
+ */
+static int dwc_otg_pcd_suspend_cb(void *_p)
+{
+ struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+
+ if (pcd->driver && pcd->driver->suspend) {
+ spin_unlock(&pcd->lock);
+ pcd->driver->suspend(&pcd->gadget);
+ spin_lock(&pcd->lock);
+ }
+ return 1;
+}
+
+/**
+ * PCD Callback function for notifying the PCD when resuming from
+ * suspend.
+ */
+static int dwc_otg_pcd_resume_cb(void *_p)
+{
+ struct dwc_pcd *pcd = (struct dwc_pcd *)_p;
+ struct core_if *core_if = pcd->otg_dev->core_if;
+
+ if (pcd->driver && pcd->driver->resume) {
+ spin_unlock(&pcd->lock);
+ pcd->driver->resume(&pcd->gadget);
+ spin_lock(&pcd->lock);
+ }
+
+ /* Maybe stop the SRP timeout timer. */
+ if (need_stop_srp_timer(core_if)) {
+ core_if->srp_timer_started = 0;
+ del_timer_sync(&pcd->srp_timer);
+ }
+ return 1;
+}
+
+/**
+ * PCD Callback structure for handling mode switching.
+ */
+static struct cil_callbacks pcd_callbacks = {
+ .start = dwc_otg_pcd_start_cb,
+ .stop = dwc_otg_pcd_stop_cb,
+ .suspend = dwc_otg_pcd_suspend_cb,
+ .resume_wakeup = dwc_otg_pcd_resume_cb,
+ .p = NULL, /* Set at registration */
+};
+
+/**
+ * Tasklet
+ *
+ */
+static void start_xfer_tasklet_func(unsigned long data)
+{
+ struct dwc_pcd *pcd = (struct dwc_pcd *)data;
+ u32 diepctl = 0;
+ int num = pcd->otg_dev->core_if->dev_if->num_in_eps;
+ u32 i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pcd->lock, flags);
+ diepctl = dwc_reg_read(in_ep_ctl_reg(pcd, 0), 0);
+
+ if (pcd->ep0.queue_sof) {
+ pcd->ep0.queue_sof = 0;
+ dwc_start_next_request(&pcd->ep0);
+ }
+
+ for (i = 0; i < num; i++) {
+ u32 diepctl = 0;
+
+ diepctl = dwc_reg_read(in_ep_ctl_reg(pcd, i), 0);
+ if (pcd->in_ep[i].queue_sof) {
+ pcd->in_ep[i].queue_sof = 0;
+ dwc_start_next_request(&pcd->in_ep[i]);
+ }
+ }
+ spin_unlock_irqrestore(&pcd->lock, flags);
+}
+
+static struct tasklet_struct start_xfer_tasklet = {
+ .next = NULL,
+ .state = 0,
+ .count = ATOMIC_INIT(0),
+ .func = start_xfer_tasklet_func,
+ .data = 0,
+};
+
+/**
+ * This function initialized the pcd Dp structures to there default
+ * state.
+ */
+static void __devinit dwc_otg_pcd_reinit(struct dwc_pcd *pcd)
+{
+ static const char *names[] = {
+ "ep0", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in",
+ "ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in",
+ "ep12in", "ep13in", "ep14in", "ep15in", "ep1out", "ep2out",
+ "ep3out", "ep4out", "ep5out", "ep6out", "ep7out", "ep8out",
+ "ep9out", "ep10out", "ep11out", "ep12out", "ep13out",
+ "ep14out", "ep15out"
+ };
+ u32 i;
+ int in_ep_cntr, out_ep_cntr;
+ u32 hwcfg1;
+ u32 num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
+ u32 num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
+ struct pcd_ep *ep;
+
+ INIT_LIST_HEAD(&pcd->gadget.ep_list);
+ pcd->gadget.ep0 = &pcd->ep0.ep;
+ pcd->gadget.speed = USB_SPEED_UNKNOWN;
+ INIT_LIST_HEAD(&pcd->gadget.ep0->ep_list);
+
+ /* Initialize the EP0 structure. */
+ ep = &pcd->ep0;
+
+ /* Init EP structure */
+ ep->desc = NULL;
+ ep->pcd = pcd;
+ ep->stopped = 1;
+
+ /* Init DWC ep structure */
+ ep->dwc_ep.num = 0;
+ ep->dwc_ep.active = 0;
+ ep->dwc_ep.tx_fifo_num = 0;
+
+ /* Control until ep is actvated */
+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+ ep->dwc_ep.dma_addr = 0;
+ ep->dwc_ep.start_xfer_buff = NULL;
+ ep->dwc_ep.xfer_buff = NULL;
+ ep->dwc_ep.xfer_len = 0;
+ ep->dwc_ep.xfer_count = 0;
+ ep->dwc_ep.sent_zlp = 0;
+ ep->dwc_ep.total_len = 0;
+ ep->queue_sof = 0;
+
+ /* Init the usb_ep structure. */
+ ep->ep.name = names[0];
+ ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+ ep->ep.maxpacket = MAX_PACKET_SIZE;
+ list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+ INIT_LIST_HEAD(&ep->queue);
+
+ /* Initialize the EP structures. */
+ in_ep_cntr = 0;
+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1 >> 3;
+
+ for (i = 1; in_ep_cntr < num_in_eps; i++) {
+ if (!(hwcfg1 & 0x1)) {
+ struct pcd_ep *ep = &pcd->in_ep[in_ep_cntr];
+
+ in_ep_cntr++;
+ /* Init EP structure */
+ ep->desc = NULL;
+ ep->pcd = pcd;
+ ep->stopped = 1;
+
+ /* Init DWC ep structure */
+ ep->dwc_ep.is_in = 1;
+ ep->dwc_ep.num = i;
+ ep->dwc_ep.active = 0;
+ ep->dwc_ep.tx_fifo_num = 0;
+
+ /* Control until ep is actvated */
+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+ ep->dwc_ep.dma_addr = 0;
+ ep->dwc_ep.start_xfer_buff = NULL;
+ ep->dwc_ep.xfer_buff = NULL;
+ ep->dwc_ep.xfer_len = 0;
+ ep->dwc_ep.xfer_count = 0;
+ ep->dwc_ep.sent_zlp = 0;
+ ep->dwc_ep.total_len = 0;
+ ep->queue_sof = 0;
+
+ ep->ep.name = names[i];
+ ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+ ep->ep.maxpacket = MAX_PACKET_SIZE;
+ list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+ INIT_LIST_HEAD(&ep->queue);
+ }
+ hwcfg1 >>= 2;
+ }
+
+ out_ep_cntr = 0;
+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1 >> 2;
+ for (i = 1; out_ep_cntr < num_out_eps; i++) {
+ if (!(hwcfg1 & 0x1)) {
+ struct pcd_ep *ep = &pcd->out_ep[out_ep_cntr];
+
+ out_ep_cntr++;
+ /* Init EP structure */
+ ep->desc = NULL;
+ ep->pcd = pcd;
+ ep->stopped = 1;
+
+ /* Init DWC ep structure */
+ ep->dwc_ep.is_in = 0;
+ ep->dwc_ep.num = i;
+ ep->dwc_ep.active = 0;
+ ep->dwc_ep.tx_fifo_num = 0;
+
+ /* Control until ep is actvated */
+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
+ ep->dwc_ep.dma_addr = 0;
+ ep->dwc_ep.start_xfer_buff = NULL;
+ ep->dwc_ep.xfer_buff = NULL;
+ ep->dwc_ep.xfer_len = 0;
+ ep->dwc_ep.xfer_count = 0;
+ ep->dwc_ep.sent_zlp = 0;
+ ep->dwc_ep.total_len = 0;
+ ep->queue_sof = 0;
+
+ ep->ep.name = names[15 + i];
+ ep->ep.ops = &dwc_otg_pcd_ep_ops;
+
+ ep->ep.maxpacket = MAX_PACKET_SIZE;
+ list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list);
+ INIT_LIST_HEAD(&ep->queue);
+ }
+ hwcfg1 >>= 2;
+ }
+
+ /* remove ep0 from the list. There is a ep0 pointer. */
+ list_del_init(&pcd->ep0.ep.ep_list);
+
+ pcd->ep0state = EP0_DISCONNECT;
+ pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
+}
+
+/**
+ * This function releases the Gadget device.
+ * required by device_unregister().
+ */
+static void dwc_otg_pcd_gadget_release(struct device *dev)
+{
+ pr_info("%s(%p)\n", __func__, dev);
+}
+
+/**
+ * Allocates the buffers for the setup packets when the PCD portion of the
+ * driver is first initialized.
+ */
+static int __devinit init_pkt_buffs(struct device *dev, struct dwc_pcd *pcd)
+{
+ if (pcd->otg_dev->core_if->dma_enable) {
+ pcd->dwc_pool = dma_pool_create("dwc_otg_pcd", dev,
+ sizeof(*pcd->setup_pkt) * 5, 32,
+ 0);
+ if (!pcd->dwc_pool)
+ return -ENOMEM;
+ pcd->setup_pkt = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL,
+ &pcd->setup_pkt_dma_handle);
+ if (!pcd->setup_pkt)
+ goto error;
+ pcd->status_buf = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL,
+ &pcd->status_buf_dma_handle);
+ if (!pcd->status_buf)
+ goto error1;
+ } else {
+ pcd->setup_pkt = kmalloc(sizeof(*pcd->setup_pkt) * 5,
+ GFP_KERNEL);
+ if (!pcd->setup_pkt)
+ return -ENOMEM;
+ pcd->status_buf = kmalloc(sizeof(u16), GFP_KERNEL);
+ if (!pcd->status_buf) {
+ kfree(pcd->setup_pkt);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+
+error1:
+ dma_pool_free(pcd->dwc_pool, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
+error:
+ dma_pool_destroy(pcd->dwc_pool);
+ return -ENOMEM;
+}
+
+/**
+ * This function initializes the PCD portion of the driver.
+ */
+int __devinit dwc_otg_pcd_init(struct device *dev)
+{
+ static const char pcd_name[] = "dwc_otg_pcd";
+ struct dwc_pcd *pcd;
+ struct dwc_otg_device *otg_dev = dev_get_drvdata(dev);
+ struct core_if *core_if = otg_dev->core_if;
+ int retval;
+
+ /* Allocate PCD structure */
+ pcd = kzalloc(sizeof(*pcd), GFP_KERNEL);
+ if (!pcd) {
+ retval = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&pcd->lock);
+
+ otg_dev->pcd = pcd;
+ s_pcd = pcd;
+ pcd->gadget.name = pcd_name;
+
+ dev_set_name(&pcd->gadget.dev, "gadget");
+ pcd->otg_dev = otg_dev;
+ pcd->gadget.dev.parent = dev;
+ pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
+ pcd->gadget.ops = &dwc_otg_pcd_ops;
+
+ if (DWC_HWCFG4_DED_FIFO_ENA_RD(core_if->hwcfg4))
+ pr_info("Dedicated Tx FIFOs mode\n");
+ else
+ pr_info("Shared Tx FIFO mode\n");
+
+ pcd->gadget.is_dualspeed = check_is_dual_speed(core_if);
+ pcd->gadget.is_otg = check_is_otg(core_if);
+
+ /* Register the gadget device */
+ retval = device_register(&pcd->gadget.dev);
+ if (retval)
+ goto unreg_device;
+
+
+ /* hook up the gadget*/
+ retval = usb_add_gadget_udc(dev, &pcd->gadget);
+ if (retval)
+ goto unreg_device;
+
+ /* Initialized the Core for Device mode. */
+ if (dwc_otg_is_device_mode(core_if))
+ dwc_otg_core_dev_init(core_if);
+
+ /* Initialize EP structures */
+ dwc_otg_pcd_reinit(pcd);
+
+ /* Register the PCD Callbacks. */
+ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
+
+ /* Setup interupt handler */
+ retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, IRQF_SHARED,
+ pcd->gadget.name, pcd);
+ if (retval) {
+ pr_err("request of irq%d failed\n", otg_dev->irq);
+ retval = -EBUSY;
+ goto err_cleanup;
+ }
+
+ /* Initialize the DMA buffer for SETUP packets */
+ retval = init_pkt_buffs(dev, pcd);
+ if (retval)
+ goto err_cleanup;
+
+ /* Initialize tasklet */
+ start_xfer_tasklet.data = (unsigned long)pcd;
+ pcd->start_xfer_tasklet = &start_xfer_tasklet;
+ return 0;
+
+err_cleanup:
+ kfree(pcd);
+ otg_dev->pcd = NULL;
+ s_pcd = NULL;
+
+unreg_device:
+ device_unregister(&pcd->gadget.dev);
+
+err:
+ return retval;
+}
+
+/**
+ * Cleanup the PCD.
+ */
+void __devexit dwc_otg_pcd_remove(struct device *dev)
+{
+ struct dwc_otg_device *otg_dev = dev_get_drvdata(dev);
+ struct dwc_pcd *pcd = otg_dev->pcd;
+
+ /* Free the IRQ */
+ free_irq(otg_dev->irq, pcd);
+
+ /* start with the driver above us */
+ if (pcd->driver) {
+ /* should have been done already by driver model core */
+ pr_warning("driver '%s' is still registered\n",
+ pcd->driver->driver.name);
+ usb_gadget_unregister_driver(pcd->driver);
+ }
+ if (pcd->start_xfer_tasklet)
+ tasklet_kill(pcd->start_xfer_tasklet);
+ tasklet_kill(&pcd->test_mode_tasklet);
+
+ device_unregister(&pcd->gadget.dev);
+ if (GET_CORE_IF(pcd)->dma_enable) {
+ dma_pool_free(pcd->dwc_pool, pcd->setup_pkt,
+ pcd->setup_pkt_dma_handle);
+ dma_pool_free(pcd->dwc_pool, pcd->status_buf,
+ pcd->status_buf_dma_handle);
+ dma_pool_destroy(pcd->dwc_pool);
+ } else {
+ kfree(pcd->setup_pkt);
+ kfree(pcd->status_buf);
+ }
+ kfree(pcd);
+ otg_dev->pcd = NULL;
+}
+
+/**
+ * This function registers a gadget driver with the PCD.
+ *
+ * When a driver is successfully registered, it will receive control
+ * requests including set_configuration(), which enables non-control
+ * requests. then usb traffic follows until a disconnect is reported.
+ * then a host may connect again, or the driver might get unbound.
+ */
+static int dwc_gadget_start(struct usb_gadget_driver *driver,
+ int (*bind) (struct usb_gadget *))
+{
+ int retval;
+
+ if (!driver || driver->speed == USB_SPEED_UNKNOWN || !bind ||
+ !driver->unbind || !driver->disconnect || !driver->setup)
+ return -EINVAL;
+
+ if (s_pcd == NULL)
+ return -ENODEV;
+
+ if (s_pcd->driver != NULL)
+ return -EBUSY;
+
+ /* hook up the driver */
+ s_pcd->driver = driver;
+ s_pcd->gadget.dev.driver = &driver->driver;
+
+ retval = bind(&s_pcd->gadget);
+ if (retval) {
+ struct core_if *core_if;
+
+ pr_err("bind to driver %s --> error %d\n",
+ driver->driver.name, retval);
+ core_if = s_pcd->otg_dev->core_if;
+ otg_set_peripheral(core_if->xceiv, &s_pcd->gadget);
+ s_pcd->driver = NULL;
+ s_pcd->gadget.dev.driver = NULL;
+ return retval;
+ }
+ return 0;
+}
+
+/**
+ * This function unregisters a gadget driver
+ */
+static int dwc_gadget_stop(struct usb_gadget_driver *driver)
+{
+ struct core_if *core_if;
+
+ if (!s_pcd)
+ return -ENODEV;
+ if (!driver || driver != s_pcd->driver)
+ return -EINVAL;
+
+ core_if = s_pcd->otg_dev->core_if;
+ core_if->xceiv->state = OTG_STATE_UNDEFINED;
+ otg_set_peripheral(core_if->xceiv, NULL);
+
+ driver->unbind(&s_pcd->gadget);
+ s_pcd->driver = NULL;
+
+ return 0;
+}
diff --git a/drivers/usb/dwc/pcd.h b/drivers/usb/dwc/pcd.h
new file mode 100644
index 0000000..27c2d0d
--- /dev/null
+++ b/drivers/usb/dwc/pcd.h
@@ -0,0 +1,139 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@xxxxxxx>
+ * Modified by Stefan Roese <sr@xxxxxxx>, DENX Software Engineering
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if !defined(__DWC_PCD_H__)
+#define __DWC_PCD_H__
+
+#include "driver.h"
+
+/*
+ * This file contains the structures, constants, and interfaces for
+ * the Perpherial Contoller Driver (PCD).
+ *
+ * The Peripheral Controller Driver (PCD) for Linux will implement the
+ * Gadget API, so that the existing Gadget drivers can be used. For
+ * the Mass Storage Function driver the File-backed USB Storage Gadget
+ * (FBS) driver will be used. The FBS driver supports the
+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
+ * transports.
+ *
+ */
+
+/* Invalid DMA Address */
+#define DMA_ADDR_INVALID (~(dma_addr_t) 0)
+/* Maxpacket size for EP0 */
+#define MAX_EP0_SIZE 64
+/* Maxpacket size for any EP */
+#define MAX_PACKET_SIZE 1024
+
+/*
+ * Get the pointer to the core_if from the pcd pointer.
+ */
+#define GET_CORE_IF(_pcd) (_pcd->otg_dev->core_if)
+
+/*
+ * DWC_otg request structure.
+ * This structure is a list of requests.
+ */
+struct pcd_request {
+ struct usb_request req; /* USB Request. */
+ struct list_head queue; /* queue of these requests. */
+ unsigned mapped:1;
+};
+
+static inline ulong in_ep_int_reg(struct dwc_pcd *pd, int i)
+{
+ return GET_CORE_IF(pd)->dev_if->in_ep_regs[i] + DWC_DIEPINT;
+}
+static inline ulong out_ep_int_reg(struct dwc_pcd *pd, int i)
+{
+ return GET_CORE_IF(pd)->dev_if->out_ep_regs[i] + DWC_DOEPINT;
+}
+static inline ulong in_ep_ctl_reg(struct dwc_pcd *pd, int i)
+{
+ return GET_CORE_IF(pd)->dev_if->in_ep_regs[i] + DWC_DIEPCTL;
+}
+
+static inline ulong out_ep_ctl_reg(struct dwc_pcd *pd, int i)
+{
+ return GET_CORE_IF(pd)->dev_if->out_ep_regs[i] + DWC_DOEPCTL;
+}
+
+static inline ulong dev_ctl_reg(struct dwc_pcd *pd)
+{
+ return GET_CORE_IF(pd)->dev_if->dev_global_regs +
+ DWC_DCTL;
+}
+
+static inline ulong dev_diepmsk_reg(struct dwc_pcd *pd)
+{
+ return GET_CORE_IF(pd)->dev_if->dev_global_regs +
+ DWC_DIEPMSK;
+}
+
+static inline ulong dev_sts_reg(struct dwc_pcd *pd)
+{
+ return GET_CORE_IF(pd)->dev_if->dev_global_regs +
+ DWC_DSTS;
+}
+
+static inline ulong otg_ctl_reg(struct dwc_pcd *pd)
+{
+ return GET_CORE_IF(pd)->core_global_regs + DWC_GOTGCTL;
+}
+
+extern int __init dwc_otg_pcd_init(struct device *dev);
+
+/*
+ * The following functions support managing the DWC_otg controller in device
+ * mode.
+ */
+extern void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_start_transfer(struct core_if *_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep);
+extern void dwc_otg_pcd_remove(struct device *dev);
+extern int dwc_otg_pcd_handle_intr(struct dwc_pcd *pcd);
+extern void dwc_otg_pcd_stop(struct dwc_pcd *pcd);
+extern void request_nuke(struct pcd_ep *ep);
+extern void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset);
+extern void dwc_otg_ep0_start_transfer(struct core_if *_if, struct dwc_ep *ep);
+
+extern void request_done(struct pcd_ep *ep, struct pcd_request *req,
+ int _status);
+
+extern void dwc_start_next_request(struct pcd_ep *ep);
+#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/