[PATCH] usb: add device IDs for igotu to navman

[Ross Burton]

Hi Greg,

I recently bought a i-gotU USB GPS, and whilst hunting around for linux
support discovered this post by you back in 2009:

http://kerneltrap.org/mailarchive/linux-usb/2009/3/12/5148644

>Try the navman driver instead.  You can either add the device id to the
> driver and rebuild it, or do this before you plug the device in:
> 	modprobe navman
> 	echo -n "0x0df7 0x0900" > /sys/bus/usb-serial/drivers/navman/new_id
> 
> and then plug your device in and see if that works.
 
I can confirm that the navman driver works with the right device IDs on
my i-gotU GT-600, which has the same device IDs.  Attached is a patch
adding the IDs.

Ross
-- 
Intel Open Source Technology Centre
http://oss.intel.com/
From bad852a97683f22f6677f312b73ae7ae9744212b Mon Sep 17 00:00:00 2001
From: Ross Burton <ross@xxxxxxxxxxxxxxx>
Date: Fri, 6 Aug 2010 16:31:49 +0100
Subject: [PATCH] usb: add device IDs for igotu to navman

---
 drivers/usb/serial/navman.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index a6b207c..c043aa1 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -25,6 +25,7 @@ static int debug;
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0a99, 0x0001) },	/* Talon Technology device */
+        { USB_DEVICE(0x0df7, 0x0900) }, /* Mobile Action i-gotU */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
1.7.1

Attachment: signature.asc
Description: This is a digitally signed message part