[PATCH 64/67] hsu: call PCI pm hooks in suspend/resume function

[Greg Kroah-Hartman]

From: Feng Tang <feng.tang@xxxxxxxxx>

Also add check for dma controller or the uart ports.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/serial/mfd.c |   31 ++++++++++++++++++++++---------
 1 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index f5e7569..bc9af50 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -1217,25 +1217,38 @@ static struct uart_driver serial_hsu_reg = {
 #ifdef CONFIG_PM
 static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state)
 {
+	void *priv = pci_get_drvdata(pdev);
 	struct uart_hsu_port *up;
 
-	up = pci_get_drvdata(pdev);
-	if (!up)
-		return 0;
-
-	uart_suspend_port(&serial_hsu_reg, &up->port);
+	/* Make sure this is not the internal dma controller */
+	if (priv && (pdev->device != 0x081E)) {
+		up = priv;
+		uart_suspend_port(&serial_hsu_reg, &up->port);
+	}
 
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
         return 0;
 }
 
 static int serial_hsu_resume(struct pci_dev *pdev)
 {
+	void *priv = pci_get_drvdata(pdev);
 	struct uart_hsu_port *up;
+	int ret;
 
-	up = pci_get_drvdata(pdev);
-	if (!up)
-		return 0;
-	uart_resume_port(&serial_hsu_reg, &up->port);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		dev_warn(&pdev->dev,
+			"HSU: can't re-enable device, try to continue\n");
+
+	if (priv && (pdev->device != 0x081E)) {
+		up = priv;
+		uart_resume_port(&serial_hsu_reg, &up->port);
+	}
 	return 0;
 }
 #else
-- 
1.7.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/