Re: [RFC PATCH] platform: Faciliatate the creation of pseduo-platformbusses

[Patrick Pannuto]

>>>>
>>>> 	struct platform_device sub_bus1 = {
>>>> 		.name		= "sub_bus1",
>>>> 		.id		= -1,
>>>> 		.dev.bus	= &my_bus_type,
>>>> 	}
>>>> 	EXPORT_SYMBOL_GPL(sub_bus1);
>>>
>>> You really want a bus hanging off of a bus?  Normally you need a device
>>> to do that, which is what I think you have here, but the naming is a bit
>>> odd to me.
>>>
>>> What would you do with this "sub bus"?  It's just a device, but you are
>>> wanting it to be around for something.
>>>
>>
>> It's for power management stuff, basically, there are actual physical buses
>> involved that can be completely powered off IFF all of their devices are
>> not in use. Plus it actually matches bus topology this way.
> 
> Then create a real bus hanging off of a device, not another device that
> "acts" like a bus here, right?  Or am I missing the point?
> 

The motivation for doing it this was is that one driver could drive
devices on two different subbusses.  In the example, "my-driver" could
drive a device on sub_bus1 AND sub_bus2 (if there were 2+ devices, one
or more on each bus).

>From my understanding, this is not possible if they are actually
different busses.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/