Re: gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)

[Eric Miao]

2010/1/26 Stanislav Brabec <utx@xxxxxxxxxx>:
> Eric Miao wrote:
>> 2010/1/26 Stanislav Brabec <utx@xxxxxxxxxx>:
>
>> > Handling platform specific edge/level wake setup would only complicate
>> > the code. (In fact, even the PXA270 platform code does not exist yet -
>> > arch/arm/mach-pxa/mfp-pxa2xx.c:__mfp_config_gpio() is not capable to
>> > configure Power Manager Keyboard Wake-Up Enable Register (PKWR).)
>> That's why WAKEUP_ON_EDGE_* is introduced, no need for gpio-keys
>> to know this.
>
> But WAKEUP_ON_EDGE_* is impossible for GPIO 95,
> enable_irq_wake()/gpio_set_wake() returns EINVAL and disable_irq_wake()
> complains on "Unbalanced IRQ 191".
>

Now I see, but I don't know why disable_irq_wake() will complains about
unbalance since it should really manage it well.

A quick dirty solution would be the platform to call keypad_set_wake()
directly somewhere. Otherwise we have to let gpio_set_wake() to handle
those keypad GPIOs and to live together with keypad_set_wake() happily,
which is really difficult.

> In case of Zaurus, gpio_keys.c have to live with wakeup on level (PKWR)
> when using enable/disable_irq_wake().
>
>> > The problem affects gpio_keys: It is a driver implementing "one key per
>> > gpio". It now handles On/Off and lid switches on Zaurus. Lid switches
>> > are on "normal" GPIOs, On/Off switch is wired to PKWR capable GPIO.
>> Ain't On/Off switch one of the matrix key? And so SPITZ_GPIO_KEY_INT
>> could be used to handle that?
>
> No. On/Off is connected directly to GPIO 95. Other keys use strobe/sense
> matrix keypad.
>
> SPITZ_GPIO_KEY_INT is a bit unspecific. I think it means: Charger was
> inserted or key was pressed or On/Off was pressed.
>
>
>
> ________________________________________________________________________
> Stanislav Brabec
> http://www.penguin.cz/~utx/zaurus
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/