[PATCH 11/18] include/mach/csp header files
From: Leo Chen
Date: Fri Jul 03 2009 - 20:07:59 EST
add mach-bcmring/include/mach/csp header files
most of them are register definitions, and inline functions
Signed-off-by: Leo Chen <leochen@xxxxxxxxxxxx>
---
arch/arm/mach-bcmring/include/mach/csp/cap.h | 63 +
.../arm/mach-bcmring/include/mach/csp/cap_inline.h | 409 +++++
.../mach-bcmring/include/mach/csp/chipcHw_def.h | 1123 +++++++++++++
.../mach-bcmring/include/mach/csp/chipcHw_inline.h | 1673 ++++++++++++++++++++
.../mach-bcmring/include/mach/csp/chipcHw_reg.h | 530 +++++++
arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h | 872 ++++++++++
arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h | 73 +
arch/arm/mach-bcmring/include/mach/csp/secHw_def.h | 100 ++
.../mach-bcmring/include/mach/csp/secHw_inline.h | 79 +
.../mach-bcmring/include/mach/csp/uartHw_inline.h | 361 +++++
.../arm/mach-bcmring/include/mach/csp/uartHw_reg.h | 169 ++
11 files changed, 5452 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/uartHw_inline.h
create mode 100644 arch/arm/mach-bcmring/include/mach/csp/uartHw_reg.h
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 0000000..30fa2d5
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+ CAP_NOT_PRESENT = 0,
+ CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+ CAP_VPM,
+ CAP_ETH_PHY,
+ CAP_ETH_GMII,
+ CAP_ETH_SGMII,
+ CAP_USB,
+ CAP_TSC,
+ CAP_EHSS,
+ CAP_SDIO,
+ CAP_UARTB,
+ CAP_KEYPAD,
+ CAP_CLCD,
+ CAP_GE,
+ CAP_LEDM,
+ CAP_BBL,
+ CAP_VDEC,
+ CAP_PIF,
+ CAP_APM,
+ CAP_SPU,
+ CAP_PKA,
+ CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+ CAP_LCD_WVGA = 0,
+ CAP_LCD_VGA = 0x1,
+ CAP_LCD_WQVGA = 0x2,
+ CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 0000000..933ce68
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS 0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040
+#define CAP_CONFIG0_USB0_DIS 0x00000080
+#define CAP_CONFIG0_USB1_DIS 0x00000100
+#define CAP_CONFIG0_TSC_DIS 0x00000200
+#define CAP_CONFIG0_EHSS0_DIS 0x00000400
+#define CAP_CONFIG0_EHSS1_DIS 0x00000800
+#define CAP_CONFIG0_SDIO0_DIS 0x00001000
+#define CAP_CONFIG0_SDIO1_DIS 0x00002000
+#define CAP_CONFIG0_UARTB_DIS 0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS 0x00008000
+#define CAP_CONFIG0_CLCD_DIS 0x00010000
+#define CAP_CONFIG0_GE_DIS 0x00020000
+#define CAP_CONFIG0_LEDM_DIS 0x00040000
+#define CAP_CONFIG0_BBL_DIS 0x00080000
+#define CAP_CONFIG0_VDEC_DIS 0x00100000
+#define CAP_CONFIG0_PIF_DIS 0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS 0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS 0x00800000
+
+#define CAP_CONFIG1_APMA_DIS 0x00000001
+#define CAP_CONFIG1_APMB_DIS 0x00000002
+#define CAP_CONFIG1_APMC_DIS 0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT 9
+#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS 0x00000010
+#define CAP_CONFIG2_PKA_DIS 0x00000020
+#define CAP_CONFIG2_RNG_DIS 0x00000080
+
+#if (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+* cap_isPresent -
+*
+* PURPOSE:
+* Determines if the chip has a certain capability present
+*
+* PARAMETERS:
+* capability - type of capability to determine if present
+*
+* RETURNS:
+* CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+ CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+ switch (capability) {
+ case CAP_VPM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_PHY:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_GMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_SGMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_USB:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_TSC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_EHSS:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SDIO:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_UARTB:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_KEYPAD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_CLCD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_GE:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_LEDM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_BBL:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_VDEC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PIF:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_APM:
+ {
+ if ((index == 0)
+ && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 2)
+ && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SPU:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PKA:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_RNG:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ default:
+ {
+ }
+ break;
+ }
+ return returnVal;
+}
+
+/****************************************************************************
+* cap_getMaxArmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the ARM CPU
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+ return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxVpmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the VPM
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxLcdRes -
+*
+* PURPOSE:
+* Determines the maximum LCD resolution capabilities
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+ return (CAP_LCD_RES_T)
+ ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+ CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 0000000..70eaea8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN 0
+#define chipcHw_VPM_HW_PHASE_ALIGN 0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+ chipcHw_CLOCK_DDR, /* DDR PHY Clock */
+ chipcHw_CLOCK_ARM, /* ARM Clock */
+ chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */
+ chipcHw_CLOCK_VPM, /* VPM Clock */
+ chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */
+ chipcHw_CLOCK_UART, /* UART Clock */
+ chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */
+ chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */
+ chipcHw_CLOCK_SPI, /* SPI Clock */
+ chipcHw_CLOCK_ETM, /* ARM ETM Clock */
+
+ chipcHw_CLOCK_BUS, /* BUS Clock */
+ chipcHw_CLOCK_OTP, /* OTP Clock */
+ chipcHw_CLOCK_I2C, /* I2C Host Clock */
+ chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */
+ chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */
+ chipcHw_CLOCK_APM100, /* APM100 Clock */
+ chipcHw_CLOCK_TSC, /* Touch screen Clock */
+ chipcHw_CLOCK_LED, /* LED Clock */
+
+ chipcHw_CLOCK_USB, /* USB Clock */
+ chipcHw_CLOCK_LCD, /* LCD CLock */
+ chipcHw_CLOCK_APM, /* APM Clock */
+
+ chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+ chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+ chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+ chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+ chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+ chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+ chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+ chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+ chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+ chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+ chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+ chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+ chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+ chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+ chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+ chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+ chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+ chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+ chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+ chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+ chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+ chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+ chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+ chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+ chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+ chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+ chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+ chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+ chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+ chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+ chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+ chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+ chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+ chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+ chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+ chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+ chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+ chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+ chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+ chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum */
+typedef enum {
+ chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */
+ chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+ chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum.
+ If supported, call chipcHw_enableSpreadSpectrum ()
+ to activate the spread spectrum with desired spread. */
+ uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */
+ uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */
+ uint32_t busClockFreqHz; /* Bus clock frequency in Hz */
+ uint32_t armBusRatio; /* ARM clock : Bus clock */
+ uint32_t vpmBusRatio; /* VPM clock : Bus clock */
+ uint32_t ddrBusRatio; /* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+ chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+ chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+ chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+ chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+ chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+ chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+ /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */
+#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */
+#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */
+#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */
+#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */
+#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */
+#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */
+#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */
+#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */
+#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+* @brief Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL1
+*
+* This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */
+ chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL2
+*
+* This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success ( # of adjustment required )
+* -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+* @brief Enables core a clock of a certain device
+*
+* This function enables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get software override strap options
+*
+* Retrieves software override strap options
+*
+* @return Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+* @brief Get pin strap options
+*
+* Retrieves pin strap options
+*
+* @return Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get valid pin strap options
+*
+* Retrieves valid pin strap options
+*
+* @return valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */
+ chipcHw_GPIO_FUNCTION_e func /* Configuration function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_PULL_e pullup /* Pullup register settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */
+ );
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/** @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/** @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+ uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 0000000..c78833a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+ chipcHw_OPTYPE_BYPASS, /* Bypass operation */
+ chipcHw_OPTYPE_OUTPUT /* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+ return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+ if ((pChipcHw->
+ PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+ (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+ return (pChipcHw->
+ ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+ return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+ return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+ chipcHw_softResetEnable(mask);
+ chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ /* Deassert module soft reset */
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 ^= ctrl1;
+ pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+ uint32_t unhold = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 |= ctrl1;
+ /* Mask out unhold request bits */
+ pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+ /* Process unhold requests */
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+ unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+ }
+
+ if (unhold) {
+ /* Make sure unhold request is effective */
+ pChipcHw->SoftReset1 &= ~unhold;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+ reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+ reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+ return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_STICKY_POR_BROM) {
+ bits |= chipcHw_REG_STICKY_POR_BROM;
+ } else {
+ uint32_t sticky;
+ sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+ bits |= chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask &
+ (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+ chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+ chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+ uint32_t sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+ bits = chipcHw_REG_STICKY_BOOT_DONE;
+ mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits | mask;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get software strap value
+*
+* Retrieves software strap value
+*
+* @return Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+ return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+ reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+* @brief Get Pin Strap Options
+*
+* This function returns the raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+ return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Valid Strap Options
+*
+* This function returns the valid raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+ uint32_t softStraps;
+
+ /*
+ ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+ ** which copies HW straps to soft straps if there is no override
+ */
+ softStraps = chipcHw_getSoftStraps();
+
+ return softStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+ uint32_t softStraps;
+
+ REG_LOCAL_IRQ_SAVE;
+ softStraps = chipcHw_getSoftStraps();
+
+ if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+ /* Copy HW straps to software straps */
+ chipcHw_setSoftStraps(chipcHw_getPinStraps());
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+ if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE2
+*
+* This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE3
+*
+* This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+ return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ (chipcHw_REG_GPIO_MUX_MASK <<
+ chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+ chipcHw_GPIO_FUNCTION_e func)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+ ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+ func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+ chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+ ~(chipcHw_REG_SLEW_RATE_MASK <<
+ chipcHw_REG_SLEW_RATE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+ (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+ chipcHw_PIN_CURRENT_STRENGTH_e
+ curr)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+ ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+ (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+ ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+ (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+ chipcHw_PIN_INPUTTYPE_e inputType)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+ ~(chipcHw_REG_INPUTTYPE_MASK <<
+ chipcHw_REG_INPUTTYPE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+ (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Power up the USB PHY
+*
+* This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+* @brief Power down the USB PHY
+*
+* This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as host
+*
+* This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as device
+*
+* This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+* @brief Lower layer funtion to enable/disable a clock of a certain device
+*
+* This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode)
+{
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ /* PLL clock output enable/disable */
+ if (mode) {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock enable is inverted */
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ } else {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock disable is inverted */
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ /* PLL clock bypass enable/disable */
+ if (mode) {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ } else if (pClockCtrl) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disables a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+ /* Disable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Enable a core clock of a certain device
+*
+* This function enables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+ /* Enable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+ /* Enable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+ /* Disable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+ return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+ reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+ reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig2,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig2,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+ return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+ return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig2 |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+ REG_LOCAL_IRQ_SAVE;
+ if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ } else {
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ }
+ pChipcHw->VPMPhaseCtrl2 =
+ (pChipcHw->
+ VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+ chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->DDRPhaseCtrl1 &=
+ ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->DDRPhaseCtrl1 |=
+ ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMPhaseCtrl1 &=
+ ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->VPMPhaseCtrl1 |=
+ ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &=
+ ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->DDRPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &=
+ ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->VPMPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 0000000..b162448
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_reg.h
+*
+* @brief Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
+
+typedef struct {
+ uint32_t ChipId; /* Chip ID */
+ uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */
+ uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */
+ uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */
+ uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */
+ uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */
+ uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */
+ uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */
+ uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */
+ uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */
+ uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */
+
+ uint32_t ACLKClock; /* ACLK Clock (Divider) */
+ uint32_t OTPClock; /* OTP Clock (Divider) */
+ uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */
+ uint32_t I2S0Clock; /* I2S0 Clock (Divider) */
+ uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */
+ uint32_t pad1;
+ uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */
+ uint32_t TSCClock; /* TSC Clock (Divider) */
+ uint32_t LEDClock; /* LED Clock (Divider) */
+
+ uint32_t USBClock; /* PLL2 Channel 1 for USB clock */
+ uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */
+ uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */
+
+ uint32_t BusIntfClock; /* Bus interface clock */
+
+ uint32_t PLLStatus; /* PLL status register (PLL1) */
+ uint32_t PLLConfig; /* PLL configuration register (PLL1) */
+ uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */
+ uint32_t PLLDivider; /* PLL divider control register (PLL1) */
+ uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */
+ uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */
+
+ uint32_t I2S1Clock; /* I2S1 Clock */
+ uint32_t AudioEnable; /* Enable/ disable audio channel */
+ uint32_t SoftReset1; /* Reset blocks */
+ uint32_t SoftReset2; /* Reset blocks */
+ uint32_t Spare1; /* Phase align interrupts */
+ uint32_t Sticky; /* Sticky bits */
+ uint32_t MiscCtrl; /* Misc. control */
+ uint32_t pad3[3];
+
+ uint32_t PLLStatus2; /* PLL status register (PLL2) */
+ uint32_t PLLConfig2; /* PLL configuration register (PLL2) */
+ uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */
+ uint32_t PLLDivider2; /* PLL divider control register (PLL2) */
+ uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */
+ uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */
+
+ uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */
+ uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */
+ uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */
+ uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+ uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */
+ uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */
+ uint32_t pad4[9];
+
+ uint32_t SoftOTP1; /* Software OTP control */
+ uint32_t SoftOTP2; /* Software OTP control */
+ uint32_t SoftStraps; /* Software strap */
+ uint32_t PinStraps; /* Pin Straps */
+ uint32_t DiffOscCtrl; /* Diff oscillator control */
+ uint32_t DiagsCtrl; /* Diagnostic control */
+ uint32_t DiagsOutputCtrl; /* Diagnostic output enable */
+ uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */
+
+ uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */
+
+ uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */
+ uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */
+ uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */
+ uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */
+ uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */
+ uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */
+ uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */
+ uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */
+
+ uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */
+ uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */
+ uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */
+ uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */
+ uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */
+ uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */
+ uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */
+ uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */
+ uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */
+ uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */
+
+ uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */
+ uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */
+ uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */
+ uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */
+ uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */
+
+ uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */
+ uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */
+ uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT 12
+#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF
+#define chipcHw_REG_REV_A0 0xA00
+#define chipcHw_REG_REV_B0 0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask
+
+ 00000000 = divide-by-256
+ 00000001 = divide-by-1
+ 00000010 = divide-by-2
+ 00000011 = divide-by-3
+ 00000100 = divide-by-4
+ 00000101 = divide-by-5
+ 00000110 = divide-by-6
+ .
+ .
+ 11111011 = divide-by-251
+ 11111100 = divide-by-252
+ 11111101 = divide-by-253
+ 11111110 = divide-by-254
+ */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1 1
+#define chipcHw_REG_PLL_PREDIVIDER_P2 1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+ chipcHw_REG_PLL_DIVIDER_FRAC
+ = 0, when SS is disable
+ */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */
+#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */
+
+#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */
+ /* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */
+ /* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */
+#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */
+ /* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */
+ /* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */
+
+ /* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */
+ /* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24
+#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8
+#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0
+ /* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0
+ /* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26
+#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000
+#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 0000000..f1b68e2
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file ddrcReg.h
+*
+* @brief Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t memcStatus;
+ uint32_t memcCmd;
+ uint32_t directCmd;
+ uint32_t memoryCfg;
+ uint32_t refreshPrd;
+ uint32_t casLatency;
+ uint32_t writeLatency;
+ uint32_t tMrd;
+ uint32_t tRas;
+ uint32_t tRc;
+ uint32_t tRcd;
+ uint32_t tRfc;
+ uint32_t tRp;
+ uint32_t tRrd;
+ uint32_t tWr;
+ uint32_t tWtr;
+ uint32_t tXp;
+ uint32_t tXsr;
+ uint32_t tEsr;
+ uint32_t memoryCfg2;
+ uint32_t memoryCfg3;
+ uint32_t tFaw;
+ } ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000
+#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT 0
+#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT 0
+#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT 0
+#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT 0
+#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT 0
+#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT 0
+#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT 0
+#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT 0
+#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT 0
+#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT 0
+#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT 0
+#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT 0
+#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT 16
+#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+ } ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100
+#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT 4
+#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+ } ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200
+#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT 2
+
+ typedef struct {
+ uint32_t input;
+ uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+ uint32_t feature;
+ } ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET 0x300
+#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t pmCtl;
+ REG32_RSVD(0x0008, 0x0010);
+ uint32_t pllStatus;
+ uint32_t pllCfg;
+ uint32_t pllPreDiv;
+ uint32_t pllDiv;
+ uint32_t pllCtl1;
+ uint32_t pllCtl2;
+ uint32_t ssCtl;
+ uint32_t ssCfg;
+ uint32_t vdlStatic;
+ uint32_t vdlDynamic;
+ uint32_t padIdle;
+ uint32_t pvtComp;
+ uint32_t padDrive;
+ uint32_t clkRgltrCtl;
+ } ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT 2
+#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t vdlCalibrate;
+ uint32_t vdlStatus;
+ REG32_RSVD(0x000c, 0x0010);
+ uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+ uint32_t readCtl;
+ uint32_t readStatus;
+ uint32_t readClear;
+ uint32_t padIdleCtl;
+ uint32_t padDriveCtl;
+ uint32_t padClkCtl;
+ uint32_t writeCtl;
+ uint32_t clkRegCtl;
+ } ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+ typedef struct {
+ uint32_t cfg;
+ uint32_t actMonCnt;
+ uint32_t ctl;
+ uint32_t lbistCtl;
+ uint32_t lbistSeed;
+ uint32_t lbistStatus;
+ uint32_t tieOff;
+ uint32_t actMonClear;
+ uint32_t status;
+ uint32_t user;
+ } ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+} /* end extern "C" */
+#endif
+#endif /* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 0000000..cfa91be
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */
+/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+ #if (CFG_GLOBAL_CHIP == FPGA11107)
+ #define HW_CFG_BUS_CLK_HZ 5000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 10000000
+ #define HW_CFG_DDR_PHY_OMIT
+ #define HW_CFG_UART_CLK_HZ 7500000
+ #else
+ #define HW_CFG_PLL_VCO_HZ 2000000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ
+ #define HW_CFG_BUS_CLK_HZ 166666666
+ #define HW_CFG_DDR_CTLR_CLK_HZ 333333333
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 142857142
+ #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ
+ #endif
+#else
+ #define HW_CFG_PLL_VCO_HZ 1800000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ 450000000
+ #define HW_CFG_BUS_CLK_HZ 150000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 300000000
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 150000000
+ #define HW_CFG_VPM_CLK_HZ 300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 0000000..d15f5f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_def.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001
+#define secHw_BLK_MASK_KEY_SCAN 0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004
+#define secHw_BLK_MASK_UART0 0x00000008
+#define secHw_BLK_MASK_UART1 0x00000010
+#define secHw_BLK_MASK_WATCHDOG 0x00000020
+#define secHw_BLK_MASK_SPUM 0x00000040
+#define secHw_BLK_MASK_DDR2 0x00000080
+#define secHw_BLK_MASK_EXT_MEM 0x00000100
+#define secHw_BLK_MASK_ESW 0x00000200
+#define secHw_BLK_MASK_SPU 0x00010000
+#define secHw_BLK_MASK_PKA 0x00020000
+#define secHw_BLK_MASK_RNG 0x00040000
+#define secHw_BLK_MASK_RTC 0x00080000
+#define secHw_BLK_MASK_OTP 0x00100000
+#define secHw_BLK_MASK_BOOT 0x00200000
+#define secHw_BLK_MASK_MPU 0x00400000
+#define secHw_BLK_MASK_TZCTRL 0x00800000
+#define secHw_BLK_MASK_INTR 0x01000000
+
+/* Trustzone register set */
+typedef struct {
+ volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */
+ volatile uint32_t setUnsecure; /* write only. reads back as 0 */
+ volatile uint32_t setSecure; /* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+ secHw_IDX_LS = 0,
+ secHw_IDX_MS = 1,
+ secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+ volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 0000000..9cd6a03
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_inline.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+ }
+
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ }
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/uartHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/uartHw_inline.h
new file mode 100644
index 0000000..a928b84
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/uartHw_inline.h
@@ -0,0 +1,361 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef _UARTHW_INLINE_H
+#define _UARTHW_INLINE_H
+
+#ifndef _UARTHW_H
+#error *** Do not include uartHw_inline.h directly. Use uartHw.h instead. ***
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <csp/uartHw.h>
+#include <mach/csp/uartHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define uartHw_DEV_MIN 0
+#define uartHw_DEV_MAX 1
+#define uartHw_DEV_CNT (uartHw_DEV_MAX - uartHw_DEV_MIN + 1)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/*****************************************************************************
+* CTS signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_CtsFlowCtrlDisable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl &= ~UARTHW_REG_CTRL_HW_FLOWCTRL_CTS;
+}
+
+static inline void uartHw_CtsFlowCtrlEnable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl |= UARTHW_REG_CTRL_HW_FLOWCTRL_CTS;
+}
+
+static inline int uartHw_CtsStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ flag & UARTHW_REG_FLAG_CTS ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+/*****************************************************************************
+* DCD signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_DcdStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ flag & UARTHW_REG_FLAG_DCD ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+/*****************************************************************************
+* DSR signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_DsrStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ flag & UARTHW_REG_FLAG_DSR ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+/*****************************************************************************
+* DTR signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_DtrStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ ctrl & UARTHW_REG_CTRL_DTR_ACTIVE ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+static inline void uartHw_DtrStateSet(unsigned uartNum, unsigned state)
+{
+ if (state == uartHw_STATE_ACTIVE) {
+ uartRegP(uartNum)->ctrl |= UARTHW_REG_CTRL_DTR_ACTIVE;
+ } else {
+ uartRegP(uartNum)->ctrl &= ~UARTHW_REG_CTRL_DTR_ACTIVE;
+ }
+}
+
+/*****************************************************************************
+* Loopback mode routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_LoopbackDisable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl &= ~UARTHW_REG_CTRL_LOOPBK_ENABLE;
+}
+
+static inline void uartHw_LoopbackEnable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl |= UARTHW_REG_CTRL_LOOPBK_ENABLE;
+}
+
+/*****************************************************************************
+* RI signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_RiStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ flag & UARTHW_REG_FLAG_RI ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+/*****************************************************************************
+* RTS signal routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_RtsFlowCtrlDisable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl &= ~UARTHW_REG_CTRL_HW_FLOWCTRL_RTS;
+}
+
+static inline void uartHw_RtsFlowCtrlEnable(unsigned uartNum)
+{
+ uartRegP(uartNum)->ctrl |= UARTHW_REG_CTRL_HW_FLOWCTRL_RTS;
+}
+
+static inline int uartHw_RtsStateGet(unsigned uartNum)
+{
+ return uartRegP(uartNum)->
+ ctrl & UARTHW_REG_CTRL_RTS_ACTIVE ? uartHw_STATE_ACTIVE :
+ uartHw_STATE_INACTIVE;
+}
+
+static inline void uartHw_RtsStateSet(unsigned uartNum, unsigned state)
+{
+ if (state == uartHw_STATE_ACTIVE) {
+ uartRegP(uartNum)->ctrl |= UARTHW_REG_CTRL_RTS_ACTIVE;
+ } else {
+ uartRegP(uartNum)->ctrl &= ~UARTHW_REG_CTRL_RTS_ACTIVE;
+ }
+}
+
+/*****************************************************************************
+* UART Rx FIFO DMA routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_RxFifoDmaDisable(unsigned uartNum)
+{
+ uartRegP(uartNum)->dmaCtrl &= ~UARTHW_REG_DMA_CTRL_RX_ENABLE;
+}
+
+static inline void uartHw_RxFifoDmaEnable(unsigned uartNum)
+{
+ uartRegP(uartNum)->dmaCtrl |= UARTHW_REG_DMA_CTRL_RX_ENABLE;
+}
+
+static inline uint32_t uartHw_RxFifoDmaAddrGet(unsigned uartNum)
+{
+ //* @todo Ensure physical address returned */
+ return (uint32_t) &uartRegP(uartNum)->fifo;
+}
+
+/*****************************************************************************
+* See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_RxFifoFull(unsigned uartNum)
+{
+ return uartRegP(uartNum)->flag & UARTHW_REG_FLAG_RX_FULL;
+}
+
+/****************************************************************************/
+/**
+* @brief Test if byte available to read from Fifo
+*
+* @note
+*
+* @return
+* 1 : data available
+* 0 : no data available
+*
+*/
+/****************************************************************************/
+static inline int uartHw_RxFifoReady(unsigned uartNum /* [IN] uart number (0 .. max) */
+ ) {
+ if (uartRegP(uartNum)->flag & UARTHW_REG_FLAG_RX_EMPTY) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Read Rx data from specified UART
+*
+* @note Blocks until Rx data is available
+*
+* @return
+* On success: Rx data value
+* On failure: -errno
+*
+*/
+/****************************************************************************/
+static inline int uartHw_RxFifoGet(unsigned uartNum /* [IN] uart number (0 .. max) */
+ ) {
+ while (uartRegP(uartNum)->flag & UARTHW_REG_FLAG_RX_EMPTY) {
+ /* wait until rx fifo not empty */
+ }
+ return uartRegP(uartNum)->fifo & UARTHW_REG_FIFO_DATA_MASK;
+}
+
+/*****************************************************************************
+* See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_RxFifoThresholdSet(unsigned uartNum, unsigned byteCnt)
+{
+ uint32_t level;
+
+ switch (byteCnt) {
+ case 4:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_8;
+ break;
+ case 8:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_4;
+ break;
+ case 16:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_2;
+ break;
+ case 24:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_3_4;
+ break;
+ case 28:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_7_8;
+ break;
+
+ default:
+ //* @todo Maybe return an -errno to handle this situation. */
+ return;
+ }
+
+ uartRegP(uartNum)->intrFifoLevel &= ~UARTHW_REG_INTR_FIFO_LEVEL_RX_MASK;
+ uartRegP(uartNum)->intrFifoLevel |=
+ ((level << UARTHW_REG_INTR_FIFO_LEVEL_RX_SHIFT) &
+ UARTHW_REG_INTR_FIFO_LEVEL_RX_MASK);
+}
+
+/*****************************************************************************
+* UART Rx FIFO DMA routines. See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_TxFifoDmaDisable(unsigned uartNum)
+{
+ uartRegP(uartNum)->dmaCtrl &= ~UARTHW_REG_DMA_CTRL_TX_ENABLE;
+}
+
+static inline void uartHw_TxFifoDmaEnable(unsigned uartNum)
+{
+ uartRegP(uartNum)->dmaCtrl |= UARTHW_REG_DMA_CTRL_TX_ENABLE;
+}
+
+static inline uint32_t uartHw_TxFifoDmaAddrGet(unsigned uartNum)
+{
+ //* @todo Ensure physical address returned */
+ return (uint32_t) &uartRegP(uartNum)->fifo;
+}
+
+/*****************************************************************************
+* See uartHw.h for API documentation
+*****************************************************************************/
+static inline int uartHw_TxFifoEmpty(unsigned uartNum)
+{
+ return uartRegP(uartNum)->flag & UARTHW_REG_FLAG_TX_EMPTY;
+}
+
+/****************************************************************************/
+/**
+* @brief Write Tx data to specified UART
+*
+* @note Blocks until able to write Tx data. This does not append a newling
+*
+* @return
+* On success: 0
+* On failure: -errno
+*
+*/
+/****************************************************************************/
+static inline int uartHw_TxFifoPut(unsigned uartNum, /* [IN] uart number (0 .. max) */
+ unsigned value /* [IN] output value */
+ ) {
+ while (uartRegP(uartNum)->flag & UARTHW_REG_FLAG_TX_FULL) {
+ }
+
+ uartRegP(uartNum)->fifo = value;
+ return 0;
+}
+
+/*****************************************************************************
+* See uartHw.h for API documentation
+*****************************************************************************/
+static inline void uartHw_TxFifoThresholdSet(unsigned uartNum, unsigned byteCnt)
+{
+ uint32_t level;
+
+ switch (byteCnt) {
+ case 4:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_8;
+ break;
+ case 8:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_4;
+ break;
+ case 16:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_1_2;
+ break;
+ case 24:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_3_4;
+ break;
+ case 28:
+ level = UARTHW_REG_INTR_FIFO_LEVEL_7_8;
+ break;
+
+ default:
+ //* @todo Maybe return an -errno to handle this situation. */
+ return;
+ }
+
+ uartRegP(uartNum)->intrFifoLevel &= ~UARTHW_REG_INTR_FIFO_LEVEL_TX_MASK;
+ uartRegP(uartNum)->intrFifoLevel |=
+ ((level << UARTHW_REG_INTR_FIFO_LEVEL_TX_SHIFT) &
+ UARTHW_REG_INTR_FIFO_LEVEL_TX_MASK);
+}
+
+/****************************************************************************/
+/**
+* @brief Wait util specified UART has finished Tx
+*
+* @note Blocks until Tx line is idle and Tx FIFO empty.
+*
+* @return
+* On success: 0
+* On failure: -errno
+*
+*/
+/****************************************************************************/
+static inline int uartHw_TxWaitIdle(unsigned uartNum /* [IN] uart number (0 .. max) */
+ ) {
+ /* Wait for the tx fifo to be empty */
+ while ((uartRegP(uartNum)->flag & UARTHW_REG_FLAG_TX_EMPTY) == 0) {
+ }
+
+ /* Wait for the final character to be sent on the txd line */
+ while (uartRegP(uartNum)->flag & UARTHW_REG_FLAG_BUSY) {
+ }
+
+ return 0;
+}
+
+#endif /* _UARTHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/uartHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/uartHw_reg.h
new file mode 100644
index 0000000..ead7ddd
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/uartHw_reg.h
@@ -0,0 +1,169 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file xxx.h
+*
+* @brief short desc
+*
+* more detail.
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _UARTHW_REG_H
+#define _UARTHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/uartHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define UARTHW_REG_FIFO_OFFSET 0x0000
+#define UARTHW_REG_FIFO_ERR_OVERRUN (1 << 11)
+#define UARTHW_REG_FIFO_ERR_BREAK (1 << 10)
+#define UARTHW_REG_FIFO_ERR_PARITY (1 << 9)
+#define UARTHW_REG_FIFO_ERR_FRAME (1 << 8)
+#define UARTHW_REG_FIFO_DATA_MASK 0xff
+
+#define UARTHW_REG_RX_STATUS_OFFSET 0x0004
+#define UARTHW_REG_RX_STATUS_ERR_OVERRUN (1 << 3)
+#define UARTHW_REG_RX_STATUS_ERR_BREAK (1 << 2)
+#define UARTHW_REG_RX_STATUS_ERR_PARITY (1 << 1)
+#define UARTHW_REG_RX_STATUS_ERR_FRAME (1 << 0)
+
+#define UARTHW_REG_RSVD_1_OFFSET 0x0008
+#define UARTHW_REG_RSVD_2_OFFSET 0x000c
+#define UARTHW_REG_RSVD_3_OFFSET 0x0010
+#define UARTHW_REG_RSVD_4_OFFSET 0x0014
+
+#define UARTHW_REG_FLAG_OFFSET 0x0018
+#define UARTHW_REG_FLAG_RI (1 << 8)
+#define UARTHW_REG_FLAG_TX_EMPTY (1 << 7)
+#define UARTHW_REG_FLAG_RX_FULL (1 << 6)
+#define UARTHW_REG_FLAG_TX_FULL (1 << 5)
+#define UARTHW_REG_FLAG_RX_EMPTY (1 << 4)
+#define UARTHW_REG_FLAG_BUSY (1 << 3)
+#define UARTHW_REG_FLAG_DCD (1 << 2)
+#define UARTHW_REG_FLAG_DSR (1 << 1)
+#define UARTHW_REG_FLAG_CTS (1 << 0)
+
+#define UARTHW_REG_RSVD_5_OFFSET 0x001c
+
+#define UARTHW_REG_IRDA_LOWPWR_OFFSET 0x0020
+
+#define UARTHW_REG_BAUD_INT_OFFSET 0x0024
+#define UARTHW_REG_BAUD_INT_MASK 0xffff
+
+#define UARTHW_REG_BAUD_FRAC_OFFSET 0x0028
+#define UARTHW_REG_BAUD_FRAC_MASK 0x3f
+
+#define UARTHW_REG_LINECTRL_OFFSET 0x002c
+#define UARTHW_REG_LINECTRL_PARITY_STICK (1 << 7)
+#define UARTHW_REG_LINECTRL_WORDLEN_MASK (0x3 << 5)
+#define UARTHW_REG_LINECTRL_WORDLEN_BITS_8 (0x3 << 5)
+#define UARTHW_REG_LINECTRL_WORDLEN_BITS_7 (0x2 << 5)
+#define UARTHW_REG_LINECTRL_WORDLEN_BITS_6 (0x1 << 5)
+#define UARTHW_REG_LINECTRL_WORDLEN_BITS_5 (0x0 << 5)
+#define UARTHW_REG_LINECTRL_FIFO_ENABLE (1 << 4)
+#define UARTHW_REG_LINECTRL_STOP_BITS_2 (1 << 3)
+#define UARTHW_REG_LINECTRL_STOP_BITS_1 0
+#define UARTHW_REG_LINECTRL_PARITY_EVEN (1 << 2)
+#define UARTHW_REG_LINECTRL_PARITY_ENABLE (1 << 1)
+#define UARTHW_REG_LINECTRL_PARITY_DISABLE 0
+#define UARTHW_REG_LINECTRL_BREAK_ENABLE (1 << 0)
+
+#define UARTHW_REG_CTRL_OFFSET 0x0030
+#define UARTHW_REG_CTRL_HW_FLOWCTRL_CTS (1 << 15)
+#define UARTHW_REG_CTRL_HW_FLOWCTRL_RTS (1 << 14)
+#define UARTHW_REG_CTRL_OUT2_ACTIVE (1 << 13)
+#define UARTHW_REG_CTRL_OUT1_ACTIVE (1 << 12)
+#define UARTHW_REG_CTRL_RTS_ACTIVE (1 << 11)
+#define UARTHW_REG_CTRL_DTR_ACTIVE (1 << 10)
+#define UARTHW_REG_CTRL_RX_ENABLE (1 << 9)
+#define UARTHW_REG_CTRL_TX_ENABLE (1 << 8)
+#define UARTHW_REG_CTRL_LOOPBK_ENABLE (1 << 7)
+#define UARTHW_REG_CTRL_SIR_LOWPWR (1 << 2)
+#define UARTHW_REG_CTRL_SIR_ENABLE (1 << 1)
+#define UARTHW_REG_CTRL_UART_ENABLE (1 << 0)
+
+#define UARTHW_REG_INTR_FIFO_LEVEL_OFFSET 0x0034
+#define UARTHW_REG_INTR_FIFO_LEVEL_RX_SHIFT 3
+#define UARTHW_REG_INTR_FIFO_LEVEL_RX_MASK (0x7 << UARTHW_REG_INTR_FIFO_LEVEL_RX_SHIFT)
+#define UARTHW_REG_INTR_FIFO_LEVEL_TX_SHIFT 0
+#define UARTHW_REG_INTR_FIFO_LEVEL_TX_MASK (0x7 << UARTHW_REG_INTR_FIFO_LEVEL_TX_SHIFT)
+
+#define UARTHW_REG_INTR_FIFO_LEVEL_1_8 0
+#define UARTHW_REG_INTR_FIFO_LEVEL_1_4 1
+#define UARTHW_REG_INTR_FIFO_LEVEL_1_2 2
+#define UARTHW_REG_INTR_FIFO_LEVEL_3_4 3
+#define UARTHW_REG_INTR_FIFO_LEVEL_7_8 4
+
+/** @todo: bit field definitions for the following registers */
+
+#define UARTHW_REG_INTR_CTRL_MASK_OFFSET 0x0038
+
+#define UARTHW_REG_INTR_STATUS_RAW_OFFSET 0x003c
+
+#define UARTHW_REG_INTR_STATUS_MASK_OFFSET 0x0040
+
+#define UARTHW_REG_INTR_CLEAR_OFFSET 0x0044
+
+#define UARTHW_REG_DMA_CTRL_OFFSET 0x0048
+#define UARTHW_REG_DMA_CTRL_RX_ON_ERROR (1 << 2)
+#define UARTHW_REG_DMA_CTRL_TX_ENABLE (1 << 1)
+#define UARTHW_REG_DMA_CTRL_RX_ENABLE (1 << 0)
+
+typedef struct {
+ uint32_t fifo;
+ uint32_t rxStatus;
+
+ REG32_RSVD(0x0008, 0x0018);
+
+ uint32_t flag;
+
+ REG32_RSVD(0x001c, 0x0020);
+
+ uint32_t irdaLowPwr;
+ uint32_t baudInteger;
+ uint32_t baudFraction;
+ uint32_t lineCtrl;
+ uint32_t ctrl;
+ uint32_t intrFifoLevel;
+ uint32_t intrCtrlMask;
+ uint32_t intrStatusRaw;
+ uint32_t intrStatusMask;
+ uint32_t intrClear;
+ uint32_t dmaCtrl;
+
+ REG32_RSVD(0x004c, 0x0100);
+
+ /* Although a dmaFifo is defined and accessible, it is not part of the PL011 IP nor is it necessary. */
+ /* DMA operations work just fine with the standard PL011 fifo, so this is not used. */
+ uint32_t dmaFifo;
+} UARTHW_REG_t;
+
+#define uartRegP(x) (x ? ((volatile UARTHW_REG_t *)MM_IO_BASE_UARTB) : ((volatile UARTHW_REG_t *)MM_IO_BASE_UARTA))
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _UARTHW_REG_H */
--
1.6.0.6
Leo Hao Chen
Software Engineer
Broadcom Canada Inc.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/