Re: da9030: ldo11 ignores disable

[Eric Miao]

Jonathan Cameron wrote:
> Liam Girdwood wrote:
>> On Thu, 2009-06-25 at 15:39 +0000, Jonathan Cameron wrote:
>>> Hi All,
>>>
>>> Whilst testing a regulator machine config I've run into a weird issue.
>>>
>>> The preliminary data sheet I have suggests that there are two enable
>>> registers
>>> for ldo11 but neither rctl22 or rctl11 seems to have any effect (on
>>> their own
>>> or both cleared together). I can change the voltage just fine, but not
>>> actually turn it off.
>>>
>>> Anyone come across this problem or have any idea what is going on?
>> I've come across something similar in the past with two enable bits
>> causing I2C register cache coherency issues. The cache bits became out
>> of sync with reality and stopped some I2C writes happening.
> Don't thing that could happen here.
>> Another option is that your hardware config doesn't allow ldo11 to be
>> disabled ?
> Other than the obvious possibility that the hardware has a bug, I can't
> seem to find a reason why this shouldn't work.
> 

I didn't meet this problem, Haojian & Paul, ever had this problem before?
Or try lookup the Errata for the Arava chip.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/