[no subject]
From: Daniel Mack
Date: Mon Mar 02 2009 - 09:32:34 EST
From: Pavel Machek <pavel@xxxxxx>
As Andrew noted, adev is pretty poor name for symbol being exported.
Rename it to lis3.
Signed-off-by: Pavel Machek <pavel@xxxxxx>
Cc: Eric Piel <eric.piel@xxxxxxxxxxxxxxxx>
Cc: Vladimir Botka <vbotka@xxxxxxx>
Cc: <Quoc.Pham@xxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
This patch is already in the -mm tree, posted as reference only.
drivers/hwmon/hp_accel.c | 48 ++++-----
drivers/hwmon/lis3lv02d.c | 176 +++++++++++++++++++-----------------
drivers/hwmon/lis3lv02d.h | 2
3 files changed, 118 insertions(+), 108 deletions(-)
diff -puN drivers/hwmon/hp_accel.c~hp_accel-adev-is-poor-name-of-exported-symbol drivers/hwmon/hp_accel.c
--- a/drivers/hwmon/hp_accel.c~hp_accel-adev-is-poor-name-of-exported-symbol
+++ a/drivers/hwmon/hp_accel.c
@@ -140,7 +140,7 @@ acpi_status lis3lv02d_acpi_write(acpi_ha
static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
{
- adev.ac = *((struct axis_conversion *)dmi->driver_data);
+ lis3_dev.ac = *((struct axis_conversion *)dmi->driver_data);
printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
return 1;
@@ -214,7 +214,7 @@ static struct dmi_system_id lis3lv02d_dm
static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
{
- acpi_handle handle = adev.device->handle;
+ acpi_handle handle = lis3_dev.device->handle;
unsigned long long ret; /* Not used when writing */
union acpi_object in_obj[1];
struct acpi_object_list args = { 1, in_obj };
@@ -254,7 +254,7 @@ static void lis3lv02d_enum_resources(str
acpi_status status;
status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
- lis3lv02d_get_resource, &adev.irq);
+ lis3lv02d_get_resource, &lis3_dev.irq);
if (ACPI_FAILURE(status))
printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
}
@@ -263,8 +263,8 @@ static s16 lis3lv02d_read_16(acpi_handle
{
u8 lo, hi;
- adev.read(handle, reg - 1, &lo);
- adev.read(handle, reg, &hi);
+ lis3_dev.read(handle, reg - 1, &lo);
+ lis3_dev.read(handle, reg, &hi);
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
return (s16)((hi << 8) | lo);
}
@@ -272,7 +272,7 @@ static s16 lis3lv02d_read_16(acpi_handle
static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
{
s8 lo;
- adev.read(handle, reg, &lo);
+ lis3_dev.read(handle, reg, &lo);
return lo;
}
@@ -283,29 +283,29 @@ static int lis3lv02d_add(struct acpi_dev
if (!device)
return -EINVAL;
- adev.device = device;
- adev.init = lis3lv02d_acpi_init;
- adev.read = lis3lv02d_acpi_read;
- adev.write = lis3lv02d_acpi_write;
+ lis3_dev.device = device;
+ lis3_dev.init = lis3lv02d_acpi_init;
+ lis3_dev.read = lis3lv02d_acpi_read;
+ lis3_dev.write = lis3lv02d_acpi_write;
strcpy(acpi_device_name(device), DRIVER_NAME);
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
- device->driver_data = &adev;
+ device->driver_data = &lis3_dev;
- lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
- switch (adev.whoami) {
+ lis3lv02d_acpi_read(device->handle, WHO_AM_I, &lis3_dev.whoami);
+ switch (lis3_dev.whoami) {
case LIS_DOUBLE_ID:
printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
- adev.read_data = lis3lv02d_read_16;
- adev.mdps_max_val = 2048;
+ lis3_dev.read_data = lis3lv02d_read_16;
+ lis3_dev.mdps_max_val = 2048;
break;
case LIS_SINGLE_ID:
printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
- adev.read_data = lis3lv02d_read_8;
- adev.mdps_max_val = 128;
+ lis3_dev.read_data = lis3lv02d_read_8;
+ lis3_dev.mdps_max_val = 128;
break;
default:
printk(KERN_ERR DRIVER_NAME
- ": unknown sensor type 0x%X\n", adev.whoami);
+ ": unknown sensor type 0x%X\n", lis3_dev.whoami);
return -EINVAL;
}
@@ -313,7 +313,7 @@ static int lis3lv02d_add(struct acpi_dev
if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
"using default axes configuration\n");
- adev.ac = lis3lv02d_axis_normal;
+ lis3_dev.ac = lis3lv02d_axis_normal;
}
INIT_WORK(&hpled_led.work, delayed_set_status_worker);
@@ -322,9 +322,9 @@ static int lis3lv02d_add(struct acpi_dev
return ret;
/* obtain IRQ number of our device from ACPI */
- lis3lv02d_enum_resources(adev.device);
+ lis3lv02d_enum_resources(lis3_dev.device);
- ret = lis3lv02d_init_device(&adev);
+ ret = lis3lv02d_init_device(&lis3_dev);
if (ret) {
flush_work(&hpled_led.work);
led_classdev_unregister(&hpled_led.led_classdev);
@@ -360,12 +360,12 @@ static int lis3lv02d_suspend(struct acpi
static int lis3lv02d_resume(struct acpi_device *device)
{
/* put back the device in the right state (ACPI might turn it on) */
- mutex_lock(&adev.lock);
- if (adev.usage > 0)
+ mutex_lock(&lis3_dev.lock);
+ if (lis3_dev.usage > 0)
lis3lv02d_poweron(device->handle);
else
lis3lv02d_poweroff(device->handle);
- mutex_unlock(&adev.lock);
+ mutex_unlock(&lis3_dev.lock);
return 0;
}
#else
diff -puN drivers/hwmon/lis3lv02d.c~hp_accel-adev-is-poor-name-of-exported-symbol drivers/hwmon/lis3lv02d.c
--- a/drivers/hwmon/lis3lv02d.c~hp_accel-adev-is-poor-name-of-exported-symbol
+++ a/drivers/hwmon/lis3lv02d.c
@@ -53,14 +53,24 @@
* joystick.
*/
-struct acpi_lis3lv02d adev = {
- .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+struct acpi_lis3lv02d lis3_dev = {
+ .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
};
-EXPORT_SYMBOL_GPL(adev);
+EXPORT_SYMBOL_GPL(lis3_dev);
static int lis3lv02d_add_fs(struct acpi_device *device);
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+ u8 lo, hi;
+
+ lis3_dev.read(handle, reg, &lo);
+ lis3_dev.read(handle, reg + 1, &hi);
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ return (s16)((hi << 8) | lo);
+}
+
/**
* lis3lv02d_get_axis - For the given axis, give the value converted
* @axis: 1,2,3 - can also be negative
@@ -89,25 +99,25 @@ static void lis3lv02d_get_xyz(acpi_handl
{
int position[3];
- position[0] = adev.read_data(handle, OUTX);
- position[1] = adev.read_data(handle, OUTY);
- position[2] = adev.read_data(handle, OUTZ);
-
- *x = lis3lv02d_get_axis(adev.ac.x, position);
- *y = lis3lv02d_get_axis(adev.ac.y, position);
- *z = lis3lv02d_get_axis(adev.ac.z, position);
+ position[0] = lis3_dev.read_data(handle, OUTX);
+ position[1] = lis3_dev.read_data(handle, OUTY);
+ position[2] = lis3_dev.read_data(handle, OUTZ);
+
+ *x = lis3lv02d_get_axis(lis3_dev.ac.x, position);
+ *y = lis3lv02d_get_axis(lis3_dev.ac.y, position);
+ *z = lis3lv02d_get_axis(lis3_dev.ac.z, position);
}
void lis3lv02d_poweroff(acpi_handle handle)
{
- adev.is_on = 0;
+ lis3_dev.is_on = 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(acpi_handle handle)
{
- adev.is_on = 1;
- adev.init(handle);
+ lis3_dev.is_on = 1;
+ lis3_dev.init(handle);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -147,10 +157,10 @@ static irqreturn_t lis302dl_interrupt(in
* the lid is closed. This leads to interrupts as soon as a little move
* is done.
*/
- atomic_inc(&adev.count);
+ atomic_inc(&lis3_dev.count);
- wake_up_interruptible(&adev.misc_wait);
- kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+ wake_up_interruptible(&lis3_dev.misc_wait);
+ kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
return IRQ_HANDLED;
}
@@ -158,10 +168,10 @@ static int lis3lv02d_misc_open(struct in
{
int ret;
- if (test_and_set_bit(0, &adev.misc_opened))
+ if (test_and_set_bit(0, &lis3_dev.misc_opened))
return -EBUSY; /* already open */
- atomic_set(&adev.count, 0);
+ atomic_set(&lis3_dev.count, 0);
/*
* The sensor can generate interrupts for free-fall and direction
@@ -174,25 +184,25 @@ static int lis3lv02d_misc_open(struct in
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
- ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
- DRIVER_NAME, &adev);
+ ret = request_irq(lis3_dev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+ DRIVER_NAME, &lis3_dev);
if (ret) {
- clear_bit(0, &adev.misc_opened);
- printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+ clear_bit(0, &lis3_dev.misc_opened);
+ printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq);
return -EBUSY;
}
- lis3lv02d_increase_use(&adev);
- printk("lis3: registered interrupt %d\n", adev.irq);
+ lis3lv02d_increase_use(&lis3_dev);
+ printk("lis3: registered interrupt %d\n", lis3_dev.irq);
return 0;
}
static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
- fasync_helper(-1, file, 0, &adev.async_queue);
- lis3lv02d_decrease_use(&adev);
- free_irq(adev.irq, &adev);
- clear_bit(0, &adev.misc_opened); /* release the device */
+ fasync_helper(-1, file, 0, &lis3_dev.async_queue);
+ lis3lv02d_decrease_use(&lis3_dev);
+ free_irq(lis3_dev.irq, &lis3_dev);
+ clear_bit(0, &lis3_dev.misc_opened); /* release the device */
return 0;
}
@@ -207,10 +217,10 @@ static ssize_t lis3lv02d_misc_read(struc
if (count < 1)
return -EINVAL;
- add_wait_queue(&adev.misc_wait, &wait);
+ add_wait_queue(&lis3_dev.misc_wait, &wait);
while (true) {
set_current_state(TASK_INTERRUPTIBLE);
- data = atomic_xchg(&adev.count, 0);
+ data = atomic_xchg(&lis3_dev.count, 0);
if (data)
break;
@@ -240,22 +250,22 @@ static ssize_t lis3lv02d_misc_read(struc
out:
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&adev.misc_wait, &wait);
+ remove_wait_queue(&lis3_dev.misc_wait, &wait);
return retval;
}
static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
{
- poll_wait(file, &adev.misc_wait, wait);
- if (atomic_read(&adev.count))
+ poll_wait(file, &lis3_dev.misc_wait, wait);
+ if (atomic_read(&lis3_dev.count))
return POLLIN | POLLRDNORM;
return 0;
}
static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
{
- return fasync_helper(fd, file, on, &adev.async_queue);
+ return fasync_helper(fd, file, on, &lis3_dev.async_queue);
}
static const struct file_operations lis3lv02d_misc_fops = {
@@ -283,12 +293,12 @@ static int lis3lv02d_joystick_kthread(vo
int x, y, z;
while (!kthread_should_stop()) {
- lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
- input_report_abs(adev.idev, ABS_X, x - adev.xcalib);
- input_report_abs(adev.idev, ABS_Y, y - adev.ycalib);
- input_report_abs(adev.idev, ABS_Z, z - adev.zcalib);
+ lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib);
+ input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib);
+ input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib);
- input_sync(adev.idev);
+ input_sync(lis3_dev.idev);
try_to_freeze();
msleep_interruptible(MDPS_POLL_INTERVAL);
@@ -299,11 +309,11 @@ static int lis3lv02d_joystick_kthread(vo
static int lis3lv02d_joystick_open(struct input_dev *input)
{
- lis3lv02d_increase_use(&adev);
- adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
- if (IS_ERR(adev.kthread)) {
- lis3lv02d_decrease_use(&adev);
- return PTR_ERR(adev.kthread);
+ lis3lv02d_increase_use(&lis3_dev);
+ lis3_dev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
+ if (IS_ERR(lis3_dev.kthread)) {
+ lis3lv02d_decrease_use(&lis3_dev);
+ return PTR_ERR(lis3_dev.kthread);
}
return 0;
@@ -311,45 +321,45 @@ static int lis3lv02d_joystick_open(struc
static void lis3lv02d_joystick_close(struct input_dev *input)
{
- kthread_stop(adev.kthread);
- lis3lv02d_decrease_use(&adev);
+ kthread_stop(lis3_dev.kthread);
+ lis3lv02d_decrease_use(&lis3_dev);
}
static inline void lis3lv02d_calibrate_joystick(void)
{
- lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
+ lis3lv02d_get_xyz(lis3_dev.device->handle, &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
}
int lis3lv02d_joystick_enable(void)
{
int err;
- if (adev.idev)
+ if (lis3_dev.idev)
return -EINVAL;
- adev.idev = input_allocate_device();
- if (!adev.idev)
+ lis3_dev.idev = input_allocate_device();
+ if (!lis3_dev.idev)
return -ENOMEM;
lis3lv02d_calibrate_joystick();
- adev.idev->name = "ST LIS3LV02DL Accelerometer";
- adev.idev->phys = DRIVER_NAME "/input0";
- adev.idev->id.bustype = BUS_HOST;
- adev.idev->id.vendor = 0;
- adev.idev->dev.parent = &adev.pdev->dev;
- adev.idev->open = lis3lv02d_joystick_open;
- adev.idev->close = lis3lv02d_joystick_close;
-
- set_bit(EV_ABS, adev.idev->evbit);
- input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
- input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
- input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+ lis3_dev.idev->name = "ST LIS3LV02DL Accelerometer";
+ lis3_dev.idev->phys = DRIVER_NAME "/input0";
+ lis3_dev.idev->id.bustype = BUS_HOST;
+ lis3_dev.idev->id.vendor = 0;
+ lis3_dev.idev->dev.parent = &lis3_dev.pdev->dev;
+ lis3_dev.idev->open = lis3lv02d_joystick_open;
+ lis3_dev.idev->close = lis3lv02d_joystick_close;
+
+ set_bit(EV_ABS, lis3_dev.idev->evbit);
+ input_set_abs_params(lis3_dev.idev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ input_set_abs_params(lis3_dev.idev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ input_set_abs_params(lis3_dev.idev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- err = input_register_device(adev.idev);
+ err = input_register_device(lis3_dev.idev);
if (err) {
- input_free_device(adev.idev);
- adev.idev = NULL;
+ input_free_device(lis3_dev.idev);
+ lis3_dev.idev = NULL;
}
return err;
@@ -358,12 +368,12 @@ EXPORT_SYMBOL_GPL(lis3lv02d_joystick_ena
void lis3lv02d_joystick_disable(void)
{
- if (!adev.idev)
+ if (!lis3_dev.idev)
return;
misc_deregister(&lis3lv02d_misc_device);
- input_unregister_device(adev.idev);
- adev.idev = NULL;
+ input_unregister_device(lis3_dev.idev);
+ lis3_dev.idev = NULL;
}
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
@@ -404,25 +414,25 @@ static ssize_t lis3lv02d_position_show(s
{
int x, y, z;
- lis3lv02d_increase_use(&adev);
- lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
- lis3lv02d_decrease_use(&adev);
+ lis3lv02d_increase_use(&lis3_dev);
+ lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ lis3lv02d_decrease_use(&lis3_dev);
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
static ssize_t lis3lv02d_calibrate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib);
+ return sprintf(buf, "(%d,%d,%d)\n", lis3_dev.xcalib, lis3_dev.ycalib, lis3_dev.zcalib);
}
static ssize_t lis3lv02d_calibrate_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- lis3lv02d_increase_use(&adev);
+ lis3lv02d_increase_use(&lis3_dev);
lis3lv02d_calibrate_joystick();
- lis3lv02d_decrease_use(&adev);
+ lis3lv02d_decrease_use(&lis3_dev);
return count;
}
@@ -434,9 +444,9 @@ static ssize_t lis3lv02d_rate_show(struc
u8 ctrl;
int val;
- lis3lv02d_increase_use(&adev);
- adev.read(adev.device->handle, CTRL_REG1, &ctrl);
- lis3lv02d_decrease_use(&adev);
+ lis3lv02d_increase_use(&lis3_dev);
+ lis3_dev.read(lis3_dev.device->handle, CTRL_REG1, &ctrl);
+ lis3lv02d_decrease_use(&lis3_dev);
val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
}
@@ -460,17 +470,17 @@ static struct attribute_group lis3lv02d_
static int lis3lv02d_add_fs(struct acpi_device *device)
{
- adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
- if (IS_ERR(adev.pdev))
- return PTR_ERR(adev.pdev);
+ lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+ if (IS_ERR(lis3_dev.pdev))
+ return PTR_ERR(lis3_dev.pdev);
- return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+ return sysfs_create_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
}
int lis3lv02d_remove_fs(void)
{
- sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
- platform_device_unregister(adev.pdev);
+ sysfs_remove_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+ platform_device_unregister(lis3_dev.pdev);
return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
diff -puN drivers/hwmon/lis3lv02d.h~hp_accel-adev-is-poor-name-of-exported-symbol drivers/hwmon/lis3lv02d.h
--- a/drivers/hwmon/lis3lv02d.h~hp_accel-adev-is-poor-name-of-exported-symbol
+++ a/drivers/hwmon/lis3lv02d.h
@@ -194,4 +194,4 @@ void lis3lv02d_poweroff(acpi_handle hand
void lis3lv02d_poweron(acpi_handle handle);
int lis3lv02d_remove_fs(void);
-extern struct acpi_lis3lv02d adev;
+extern struct acpi_lis3lv02d lis3_dev;
_
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/