Re: [PATCH 11/11] memstick: add support for JMicron jmb38x MemoryStick host controller

[Alex Dubov]

--- Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:

> On Wed,  5 Mar 2008 03:02:28 +1100
> oakad@xxxxxxxxxxxxxx wrote:
> 
> > +static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
> > +{
> > +	unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
> > +
> > +	writel(host_ctl | HOST_CONTROL_RESET_REQ | HOST_CONTROL_RESET,
> > +	       host->addr + HOST_CONTROL);
> > +
> > +	while (HOST_CONTROL_RESET_REQ
> > +	       & (host_ctl = readl(host->addr + HOST_CONTROL))) {
> 
> host_ctl is written to but is not used again.

It was supposed to be used in the dev_dbg printout.

> 
> > +		ndelay(100);
> > +		dev_dbg(&host->chip->pdev->dev, "reset\n");
> > +	}
> > +
> > +	writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
> > +	writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
> > +
> > +	dev_dbg(&host->chip->pdev->dev, "reset\n");
> > +}
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/