Re: Various problems on Axis 700 Lite VIA C7
From: Guennadi Liakhovetski
Date: Fri Oct 05 2007 - 17:30:31 EST
On Sat, 6 Oct 2007, Michael Tokarev wrote:
> That to say - it may be some miscompilations, but may be some probs with
> hardware itself. If you can, try to reproduce the same on another board
> (I just tried to boot 2.6.23-rc5 on this machine, compiled for PIII CPU
> using gcc-4.1.2 (no other version installed, sorry) - no issues so far).
Hm, well, I could only compile a i686 kernel and Intel chipset with
"otherwise the same" config with these two compiler options to test...
Maybe some time. No, I do not have another C7 system.
> And no, I'm not trying to say "don't use ViA C7" etc -- I just love this
> my box, it's very good, powerful enouth and quiet. Just be prepared for
> some... issues, which happens - rarely but still.
Well, this very system has been running git and compiling kernels for
itself the whole day today without a single issue. The gcc-3.3.5
miscompiled kernel was compiled on another machine. So, I hope my specific
sample is stable. And I need it to be stable, because I'm going to run my
mail-server on it... BTW, compiled a tickless kernel on it, so far without
looking into user-space after 12 min uptime 40290 timer interrupts, i.e.,
17Hz, not bad.
As for sensors - my system seems to have a w83627ehf chip, "sensors"
output (under 2.6.22) looks pretty funny too:
ERROR: Can't get adapter or algorithm?!?
VCore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +12.41 V (min = +3.17 V, max = +9.24 V) ALARM
AVCC: +3.26 V (min = +3.82 V, max = +1.79 V) ALARM
3VCC: +3.26 V (min = +2.86 V, max = +1.49 V) ALARM
in4: +1.54 V (min = +1.38 V, max = +1.46 V) ALARM
in5: +1.59 V (min = +2.04 V, max = +0.95 V) ALARM
in6: +4.71 V (min = +4.48 V, max = +3.05 V) ALARM
VSB: +3.26 V (min = +4.08 V, max = +4.08 V) ALARM
VBAT: +3.20 V (min = +3.57 V, max = +3.02 V) ALARM
in9: +1.59 V (min = +2.04 V, max = +2.01 V) ALARM
Case Fan: 0 RPM (min = 3668 RPM, div = 16) ALARM
CPU Fan: 0 RPM (min = 4440 RPM, div = 16) ALARM
Aux Fan: 0 RPM (min = 3125 RPM, div = 16) ALARM
fan5: 0 RPM (min = 0 RPM, div = 8)
Sys Temp: +39C (high = -6C, hyst = -2C) ALARM
CPU Temp: +43.0C (high = +100.0C, hyst = +95.0C)
AUX Temp: +42.5C (high = +100.0C, hyst = +95.0C)
Maybe at least CPU Temp. at least correlates with the real value:-) Yes,
I'll look in BIOS next time I boot with a connected monitor and a
Thanks for the info!
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/