[PATCH (v2)] crypto: Remove pointless padlock module

From: Simon Arlott
Date: Sun Apr 29 2007 - 04:01:36 EST


When this is compiled in it is run too early to do anything useful:
[ 6.052000] padlock: No VIA PadLock drivers have been loaded.
[ 6.052000] padlock: Using VIA PadLock ACE for AES algorithm.
[ 6.052000] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.

When it's a module it isn't doing anything special, the same functionality can be provided in userspace by "probeall padlock padlock-aes padlock-sha" in modules.conf if it is required.

Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: Michal Ludvig <michal@xxxxxxxx>
---
On 29/04/07 02:59, Randy Dunlap wrote:
Simon Arlott wrote:
+ depends on CRYPTO && X86_32

All of drivers/crypto/Kconfig already depends on CRYPTO, so just
depends on X86_32
should be enough.

Ok, I've changed this for geode too.

On 29/04/07 08:28, Ingo Oeser wrote:
On Sunday 29 April 2007, Simon Arlott wrote:
> Ideally I'd just remove that module completely, all it does is > trigger the loading of the other two modules when modules are > used - so I'll submit a patch for that instead.

That's much better!

When you force a feature to be a module on a kernel without module support, it will effectivly be disabled.

Well that's mostly the point - it shouldn't get compiled in - ever, but it also has other modules depending on it in Kconfig that shouldn't need to be modules.

drivers/crypto/Kconfig | 16 ++----------
drivers/crypto/Makefile | 1 -
drivers/crypto/padlock.c | 58 ----------------------------------------------
3 files changed, 3 insertions(+), 72 deletions(-)
delete mode 100644 drivers/crypto/padlock.c

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index ff8c4be..f21fe66 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -1,10 +1,10 @@
menu "Hardware crypto devices"

config CRYPTO_DEV_PADLOCK
- tristate "Support for VIA PadLock ACE"
+ bool "Support for VIA PadLock ACE"
depends on X86_32
select CRYPTO_ALGAPI
- default m
+ default y
help
Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine)
@@ -14,16 +14,6 @@ config CRYPTO_DEV_PADLOCK
The instructions are used only when the CPU supports them.
Otherwise software encryption is used.

- Selecting M for this option will compile a helper module
- padlock.ko that should autoload all below configured
- algorithms. Don't worry if your hardware does not support
- some or all of them. In such case padlock.ko will
- simply write a single line into the kernel log informing
- about its failure but everything will keep working fine.
-
- If you are unsure, say M. The compiled module will be
- called padlock.ko
-
config CRYPTO_DEV_PADLOCK_AES
tristate "PadLock driver for AES algorithm"
depends on CRYPTO_DEV_PADLOCK
@@ -55,7 +45,7 @@ source "arch/s390/crypto/Kconfig"

config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
- depends on CRYPTO && X86_32 && PCI
+ depends on X86_32 && PCI
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
default m
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 6059cf8..d070030 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_CRYPTO_DEV_PADLOCK) += padlock.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
diff --git a/drivers/crypto/padlock.c b/drivers/crypto/padlock.c
deleted file mode 100644
index d6d7dd5..0000000
--- a/drivers/crypto/padlock.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Cryptographic API.
- *
- * Support for VIA PadLock hardware crypto engine.
- *
- * Copyright (c) 2006 Michal Ludvig <michal@xxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/crypto.h>
-#include <linux/cryptohash.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/scatterlist.h>
-#include "padlock.h"
-
-static int __init padlock_init(void)
-{
- int success = 0;
-
- if (crypto_has_cipher("aes-padlock", 0, 0))
- success++;
-
- if (crypto_has_hash("sha1-padlock", 0, 0))
- success++;
-
- if (crypto_has_hash("sha256-padlock", 0, 0))
- success++;
-
- if (!success) {
- printk(KERN_WARNING PFX "No VIA PadLock drivers have been loaded.\n");
- return -ENODEV;
- }
-
- printk(KERN_NOTICE PFX "%d drivers are available.\n", success);
-
- return 0;
-}
-
-static void __exit padlock_fini(void)
-{
-}
-
-module_init(padlock_init);
-module_exit(padlock_fini);
-
-MODULE_DESCRIPTION("Load all configured PadLock algorithms.");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michal Ludvig");
-
--
1.5.0.1

--
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/