Re: [RFT] e100 driver on ARM

From: David Acker
Date: Thu Apr 26 2007 - 09:41:29 EST


Lennart Sorensen wrote:
Well the IT8152G+PXA255 combination used on the SBC we tried a couple of
years ago did not work. The PCI bus had errors and the SBC maker gave
up trying to fix it. We switched to a Geode SC1200 based board instead
which works fine PCI wise.


I don't think this is it. Other PCI devices work fine on this board include several 802.11 radios. The S-bit patch totally fixes the problem.

Here is a quote from Russell that describes what I believe is the main problem:
http://www-gatago.com/linux/kernel/15457063.html
"
Has e100 actually been fixed to use the PCI DMA API correctly yet?
Looking at it, it doesn't look like it, so until it does, eepro100
is the far better bet for platforms needing working DMA API.

What I'm talking about is e100's apparant belief that it can modify
rfd's in the receive ring on a non-cache coherent architecture and
expect the data around it to remain unaffected (see e100_rx_alloc_skb):

struct rfd {
u16 status;
u16 command;
u32 link;
u32 rbd;
u16 actual_size;
u16 size;
};

it touches command and link. This means that the whole rfd plus
maybe the following or preceding 16 bytes get loaded into a cache
line (assuming cache lines of 32 bytes), and that data written
out again at sync. However, it does this on what seems to be an
active receive chain.

So, both the CPU _and_ the device own the same data. Which is a
violation of the DMA API.
"

I think that the S-bit patch fixes it because the hardware spins on the s-bit instead of using the packet. With just the el-bit, the hardware tries to use the same cache line that the software is updating.

Can someone from Intel let us know if I understand the hardware's handling of the S and EL bits? If my interpretation is correct, can the s-bit patch be applied? It seems like the correct way to lock out the hardware while a packet is being updated. I have not seen a reason given not to apply the patch.

-Ack
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/