Re: [lm-sensors] Re: 2.6.12-rc6-mm1

[Mark M. Hoffman]

Hi Soren, et. al.:

> On Wednesday 08 June 2005 02:53, Jean Delvare wrote:
> > If it doesn't work, please try reverting (in reverse order):
> >   gregkh-i2c-hwmon-01.patch
> >   gregkh-i2c-hwmon-02.patch
> >   gregkh-i2c-hwmon-03.patch
> >   i2c-chips-need-hwmon.patch
> >   gregkh-i2c-hwmon-02-sparc64-fix.patch
> > and see how it goes.

* Søren Lott <soren3@xxxxxxxxx> [2005-06-08 04:08:04 -0300]:
> yeap, reverting these did the trick, all i2c entries in sysfs are back. :)

My bad.  Although I will redo the hwmon patches soon anyway, here is a
patch that you can apply (after reapplying the above) that should get
you working again.  BTW: I tested it on almost identical h/w as yours,
this time with the same relevant config options, against 2.6.12-rc5-mm1.
This applies to -rc6-mm1.

---------------

This patch fixes an init order bug between hwmon and i2c/chips,
without which many sensors drivers will not initialize properly
(in non-modular systems).

Signed-off-by: Mark M. Hoffman <mhoffman@xxxxxxxxxxxxx>

Index: linux-2.6.12-rc6-mm1/drivers/Makefile
===================================================================
--- linux-2.6.12-rc6-mm1.orig/drivers/Makefile
+++ linux-2.6.12-rc6-mm1/drivers/Makefile
@@ -53,8 +53,11 @@ obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_I2O)		+= message/
-obj-$(CONFIG_I2C)		+= i2c/
+
+# most of i2c/chips depends on hwmon/
 obj-$(CONFIG_HWMON)		+= hwmon/
+obj-$(CONFIG_I2C)		+= i2c/
+
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/

-- 
Mark M. Hoffman
mhoffman@xxxxxxxxxxxxx

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/