Re: ipw2100: firmware problem

[Pavel Machek]

Hi!

> > Do you want to associate to an AP when your kernel boots,
> > _before_ any iwconfig had a chance to configure anything?
> > That's strange.
> > 
> > My position is that wifi drivers must start up in an "OFF" mode.
> > Do not send anything. Do not join APs or start IBSS.
> 
> Agreed.

Me too ;-).

> > Thus, no need to load fw in early boot.
> 
> I don't think this is true. Loading the firmware on the first
> "ifconfig up" is problematic. Often, people want to rename the
> device from ethX/wlanX/... to something stable. This is usually
> based on the adapter's MAC address, which is not visible until
> the firmware is loaded.
> 
> Prism54 does it this way and it really sucks. You need to bring
> the adapter up to load the firmware, then bring it back down,
> rename it, and bring it up again.
> 
> Denis: any plans for this to be fixed?
> 
> I agree that drivers should initialize the adapter in the OFF
> state, but the firmware needs to be loaded earlier than the
> first ifconfig up.
> 
> How about loading the firmware when the first ioctl touches the
> device? This way, it would get loaded just before the MAC address
> is retrieved.

Thats really ugly :-(.

				Pavel
-- 
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/