Re: [PATCH] [SERIAL] add TP560 data/fax/modem support

[Bjorn Helgaas]

On Mon, 2005-02-07 at 15:12 -0500, linux-os wrote:
> I thought somebody promised to add a pci_route_irq(dev) or some
> such so that the device didn't have to be enabled before
> the IRQ was correct.
>
> I first reported this bad IRQ problem back in December of 2004.
> Has the new function been added?

That's a completely different problem.  The point here is that
the serial driver currently doesn't do anything with the TP560
(no pci_enable_device(), no pci_route_irq(), no nothing).  Then
when setserial comes along and force-feeds the driver with the
IO and IRQ info, there's nothing at that point that does anything
to enable the device or route its interrupt either.

I did raise the idea of adding a pci_route_irq() interface, but
to be honest, I was never convinced of its general usefulness.
I haven't heard of any driver in the tree that requires it,
so it's not clear that it would be accepted even if I (or you)
wrote it.

I think you mentioned a specific PCI interface chip that was
susceptible to the problem; is there a public reference that
would help explicate the situation?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/