Re: Fw: Oops at bttv_risc_packed (2.6.8-rc1)

[Duncan Sands]

On Tuesday 17 August 2004 16:22, Gerd Knorr wrote:
> > DEBUG_PAGEALLOC
> 
> Hmm, amd64 hasn't this one?
> 
> >  [pg0+543078197/1069322240] bttv_buffer_risc+0x4b5/0x5b0 [bttv]
> 
> Looks like the buffer for the risc instructions overflows.  No idea why
> through, the size calculation looks ok.  Can you please apply the debug
> patch below, load bttv with "bttv_debug=1" insmod option and try again?
> 
> What app triggers this btw, and which capture parameters (size, format)?

Hi Gerd, I haven't been able to capture a new oops - but I continue to get
the usual hard hangs.  Here's the output before a hang, captured using
netconsole.  The app is xawtv, using PAL composite video.  I've attached
the xawtv verbose output (for a different run).  The time between starting and
hanging was around one minute.  I don't see anything strange...

All the best,

Duncan.

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 19, latency: 32, mmio: 0xdfbfe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
bttv0: i2c attach [client=(tuner unset)]
bttv0: Hauppauge eeprom: model=44806, tuner=Philips FI1216MF MK2 (3), radio=no
bttv0: using tuner=3
tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)) by bt878 #0 [sw]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: PLL: no change required
switch_overlay: enter [new=dddf6360]
switch_overlay: done
bttv0: next set: top=dddf6360 bottom=dddf6360 [screen=dddf6360,irq=0,0]
switch_overlay: enter [new=dddf6578]
switch_overlay: old=dddf6360 state is 3
bttv0: next set: top=dddf6578 bottom=dddf6578 [screen=dddf6578,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf6254]
switch_overlay: old=dddf6578 state is 3
bttv0: next set: top=dddf6254 bottom=dddf6254 [screen=dddf6254,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf6ab4]
switch_overlay: old=dddf6254 state is 3
bttv0: next set: top=dddf6ab4 bottom=dddf6ab4 [screen=dddf6ab4,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf69a8]
switch_overlay: old=dddf6ab4 state is 3
bttv0: next set: top=dddf69a8 bottom=dddf69a8 [screen=dddf69a8,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf689c]
switch_overlay: old=dddf69a8 state is 3
bttv0: next set: top=dddf689c bottom=dddf689c [screen=dddf689c,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf6ab4]
switch_overlay: old=dddf689c state is 3
bttv0: next set: top=dddf6ab4 bottom=dddf6ab4 [screen=dddf6ab4,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf6254]
switch_overlay: old=dddf6ab4 state is 3
bttv0: next set: top=dddf6254 bottom=dddf6254 [screen=dddf6254,irq=0,0]
switch_overlay: done
switch_overlay: enter [new=dddf689c]
switch_overlay: old=dddf6254 state is 3
bttv0: next set: top=dddf689c bottom=dddf689c [screen=dddf689c,irq=0,0]
switch_overlay: done

...hung...

Attachment: xawtv.log.gz
Description: GNU Zip compressed data