Linux version 2.4.20-gentoo-r1 (root@venkman) (gcc version 3.2.2 20030322 (Gentoo Linux 1.4 3.2.2-r2)) #6 Sat Mar 29 00:55:29 ART 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: root=/dev/discs/disc0/part7 vga=0x0f06 quiet Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1000.142 MHz processor. Console: colour VGA+ 80x34 Calibrating delay loop... 1970.17 BogoMIPS Memory: 254432k/262080k available (1325k kernel code, 5220k reserved, 240k data, 100k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.0881 MHz. ..... host bus clock speed is 133.0317 MHz. cpu: 0, clocks: 133317, slice: 66658 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG CD-R/RW DRIVE SW-208F, ATAPI CD/DVD-ROM drive hdb: Pioneer DVD-ROM ATAPIModel DVD-114 0124, ATAPI CD/DVD-ROM drive hdc: QUANTUM FIREBALLP AS20.5, ATA DISK drive hdd: ST330630A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c02cbdf0, I/O limit 4095Mb (mask 0xffffffff) hdc: 40132503 sectors (20548 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100) blk: queue c02cbf30, I/O limit 4095Mb (mask 0xffffffff) hdd: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66) Partition check: /dev/ide/host0/bus1/target0/lun0: [PTBL] [2498/255/63] p1 < p5 p6 p7 p8 > /dev/ide/host0/bus1/target1/lun0: [PTBL] [3720/255/63] p1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 16:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 100k freed Adding Swap: 265032k swap-space (priority -1) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 12 for device 00:0a.0 eth0: RealTek RTL8139 Fast Ethernet at 0xdc00, 00:e0:7d:9f:1f:90, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139C' Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 10 for device 00:07.2 PCI: Sharing IRQ 10 with 00:07.3 PCI: Sharing IRQ 10 with 00:0c.0 uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:07.3 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:0c.0 uhci.c: USB UHCI at I/O 0xd800, IRQ 10 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver mice: PS/2 mouse device common for all mice Creative EMU10K1 PCI Audio Driver, version 0.20a, 01:16:43 Mar 29 2003 PCI: Found IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:07.3 emu10k1: EMU10K1 rev 5 model 0x8040 found, IO at 0xe000-0xe01f, IRQ 10 ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5) hda: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdb: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: raid0 personality registered as nr 2 [events: 0000081a] [events: 0000081a] md: autorun ... md: considering ide/host0/bus1/target0/lun0/part8 ... md: adding ide/host0/bus1/target0/lun0/part8 ... md: adding ide/host0/bus1/target1/lun0/part1 ... md: created md0 md: bind md: bind md: running: md: ide/host0/bus1/target0/lun0/part8's event counter: 0000081a md: ide/host0/bus1/target1/lun0/part1's event counter: 0000081a md0: max total readahead window set to 496k md0: 2 data-disks, max readahead per data-disk: 248k raid0: looking at ide/host0/bus1/target1/lun0/part1 raid0: comparing ide/host0/bus1/target1/lun0/part1(29880768) with ide/host0/bus1/target1/lun0/part1(29880768) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at ide/host0/bus1/target0/lun0/part8 raid0: comparing ide/host0/bus1/target0/lun0/part8(15590976) with ide/host0/bus1/target1/lun0/part1(29880768) raid0: NOT EQUAL raid0: comparing ide/host0/bus1/target0/lun0/part8(15590976) with ide/host0/bus1/target0/lun0/part8(15590976) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 0 raid0: checking ide/host0/bus1/target1/lun0/part1 ... contained as device 0 (29880768) is smallest!. raid0: checking ide/host0/bus1/target0/lun0/part8 ... contained as device 1 (15590976) is smallest!. raid0: zone->nb_dev: 2, size: 31181952 raid0: current zone offset: 15590976 raid0: zone 1 raid0: checking ide/host0/bus1/target1/lun0/part1 ... contained as device 0 (29880768) is smallest!. raid0: checking ide/host0/bus1/target0/lun0/part8 ... nope. raid0: zone->nb_dev: 1, size: 14289792 raid0: current zone offset: 29880768 raid0: done. raid0 : md_size is 45471744 blocks. raid0 : conf->smallest->size is 14289792 blocks. raid0 : nb_zone is 4. raid0 : Allocating 32 bytes for hash. md: updating md0 RAID superblock on device md: ide/host0/bus1/target0/lun0/part8 [events: 0000081b]<6>(write) ide/host0/bus1/target0/lun0/part8's sb offset: 15590976 md: ide/host0/bus1/target1/lun0/part1 [events: 0000081b]<6>(write) ide/host0/bus1/target1/lun0/part1's sb offset: 29880768 md: ... autorun DONE. SGI XFS snapshot 2.4.20-2002-11-29_01:21_UTC with no debug enabled XFS mounting filesystem md(9,0) Ending clean XFS mount for filesystem: md(9,0) hub.c: new USB device 00:07.2-1, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected hub.c: new USB device 00:07.2-2, assigned address 3 usb.c: USB device 3 (vend/prod 0x5a9/0xa511) is not claimed by any active driver. hub.c: new USB device 00:07.2-1.2, assigned address 4 input0: Microsoft Microsoft IntelliMouse® Explorer on usb1:4.0 eth0: Setting half-duplex based on auto-negotiated partner ability 0000. hdb: CHECK for good STATUS hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdd: task_no_data_intr: error=0x04 { DriveStatusError } 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4191 Mon Dec 9 11:49:01 PST 2002 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Detected Via Apollo Pro chipset agpgart: AGP aperture is 64M @ 0xd8000000 inserting floppy driver for 2.4.20-gentoo-r1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 02 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 08 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in parameter list -- (asc=0x26, ascq=0x00) The failed "Mode Select 10" packet command was: "55 10 00 00 00 00 00 00 3c 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 02 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 08 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in parameter list -- (asc=0x26, ascq=0x00) The failed "Mode Select 10" packet command was: "55 10 00 00 00 00 00 00 3c 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 02 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 08 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 02 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense 10" packet command was: "5a 00 30 00 00 00 00 00 08 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x30 ATAPI device hda: Error: Medium error -- (Sense key=0x03) Write error - loss of streaming -- (asc=0x0c, ascq=0x09) The failed "Write 10" packet command was: "2a 00 ff ff ff 6a 00 00 1f 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x30 ATAPI device hda: Error: Medium error -- (Sense key=0x03) (reserved error code) -- (asc=0x02, ascq=0x00) The failed "Write 10" packet command was: "2a 00 00 00 02 6c 00 00 1f 00 00 00 " hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x50 ATAPI device hda: Error: Illegal request -- (Sense key=0x05) Invalid field in parameter list -- (asc=0x26, ascq=0x00) The failed "Mode Select 10" packet command was: "55 10 00 00 00 00 00 00 10 00 00 00 "