Linux version 2.5.54 (root@sbarn.net) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #4 Fri Jan 3 20:31:34 EST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000c8000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017cf0000 (usable)
 BIOS-e820: 0000000017cf0000 - 0000000017cfc000 (ACPI data)
 BIOS-e820: 0000000017cfc000 - 0000000017d00000 (ACPI NVS)
 BIOS-e820: 0000000017d00000 - 0000000017e80000 (usable)
 BIOS-e820: 0000000017e80000 - 0000000018000000 (reserved)
 BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
382MB LOWMEM available.
ACPI: Wakeup code way too big, will crash on attempt to suspend
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 97920
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 93824 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 PTLTD                      ) @ 0x000f6670
ACPI: RSDT (v001 PTLTD    RSDT   01540.00000) @ 0x17cf71f4
ACPI: FADT (v001 INTEL  Whitney  01540.00000) @ 0x17cfbf0a
ACPI: MADT (v001 PTLTD  	 APIC   01540.00000) @ 0x17cfbf7e
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 01540.00000) @ 0x17cfbfd8
ACPI: DSDT (v001  INTEL  Whitney 01540.00000) @ 0x00000000
ACPI: BIOS passes blacklist
Building zonelist for node : 0
Kernel command line: rw root=/dev/ide/host0/bus0/target0/lun0/part1 hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1096.396 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2162.68 BogoMIPS
Memory: 383780k/391680k available (1954k kernel code, 7064k reserved, 659k data, 276k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU                1100MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
device class 'cpu': registering
device class cpu: adding driver system:cpu
PCI: PCI BIOS revision 2.10 entry at 0xfd9a8, last bus=1
PCI: Using configuration type 1
device class cpu: adding device CPU 0
interfaces: adding device CPU 0
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20021217
 tbxface-0098 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:..........................................................................................................................................
Table [DSDT] - 427 Objects with 39 Devices 138 Methods 16 Regions
ACPI Namespace successfully loaded at root c040249c
evxfevnt-0073 [04] acpi_enable           : Transition to ACPI mode successful
   evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE15
   evgpe-0262: *** Info: GPE Block1 defined as GPE16 to GPE31
Executing all Device _STA and_INI methods:.......................................
39 Devices found containing: 39 _STA, 1 _INI methods
Completing Region/Field/Buffer/Package initialization:.........................................................................
Initialized 13/16 Regions 0/0 Fields 27/27 Buffers 33/33 Packages (427 nodes)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ACPI Debug] Buffer: Length 06
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
block request queues:
 128 requests per read queue
 128 requests per write queue
 8 requests per batch
 enter congestion at 31
 exit congestion at 33
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
NET4: Frame Diverter 0.46
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Enabling SEP on CPU 0
aio_setup: sizeof(struct page) = 40
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
acpi_processor-2422 [07] acpi_processor_get_inf: Invalid PBLK length [5]
ACPI: Processor [CPU0] (supports C1)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
device class 'tty': registering
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: ST320410A, ATA DISK drive
hdc: SAMSUNG CD-ROM SC-148, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63
 /dev/ide/host0/bus0/target0/lun0: p1 p2
end_request: I/O error, dev hdc, sector 0
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdc, sector 0
device class 'input': registering
register interface 'mouse' with class 'input'
mice: PS/2 mouse device common for all mice
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
pc110pad: I/O area 0x15e0-0x15e4 in use.
input: PC Speaker
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
oprofile: using timer interrupt.
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 276k freed
Adding 409648k swap on /dev/hda2.  Priority:-1 extents:1
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?