RAID between ide and scsi problem

From: Marcel J.E. Mol (marcel@mesa.nl)
Date: Sat Apr 13 2002 - 06:00:50 EST


Hi,

I have a problem booting a raid pair between a ide and scsi partitions.

When booting the system the md driver comes in and tells me it can find
for example the hda2 device but not the corresponding sda2 device
and as a consequence continues in degraded mode. If I'm correct this
happens just after the hda partitons are scanned.
Later on the scsi driver comes in to play and finds the sda device.
After booting the systems runs in degraded mode, but I see the scsi disk.
Using raidhotadd I can bring the md to a normal state, but at the
next reboot the same problem occurs and the system is started in degraded
mode again.

It looks as linux finds the ide disk (and the raid partions on it), runs
the md driver that figures the pair needs a partition on a different
(scsi) drive but this drive is not yet detected as the scsi init code
has not run yet...

Building raid on two ide disks works just fine as does running it on
two scsi disks.

Is a raid combination on ide/scsi supported?

PS: shouldn't the kernel detect afterwards that the scsi drive becomes
    available and start syncing the disks?

-Marcel

-- 
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel@mesa.nl                 2630 AC  Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number,           Linux user 1148  --  counter.li.org
    so they gave me a name!  -- Rupert Hine  --  www.ruperthine.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Apr 15 2002 - 22:00:21 EST