when I insert a PCMCIA card (3 cards tested) in my Sony Vaio R600HEK the
system freezes. When I remove the card it runs again. logs show nothing,
dmesg shows nothing..
When I boot the system with a PCMCIA card in the slot, it works AND I can
remove it and add it again without a problem!!??!!
So the workaround it to boot it with a card always, but that is not really
it is a Debian testing (Woody) system with kernel 2.4.14, the following
modules are loaded: cb_enabler, ds, yenta_socket and pcmcia_core
I also have some weird kernel messages when the PCMCIA is started:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: No IRQ known for interrupt pin A of device 01:02.0. Please try using
Yenta IRQ list 04b8, PCI irq0
Socket status: 30000410
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
More info on this laptop can be found on
including dmesg output and lspci output and stuff like that
anybody an idea?
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to email@example.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 23 2001 - 21:00:19 EST