I had the same problem when i upgraded to 2.4.2.
Upgrading to the latest modutils
should get you going again.
On Sun, 15 Apr 2001, Matthew W. Lowe wrote:
> I just tried to upgrade from whatever kernel comes with redhat to 2.4.3.
> The build, install and such was smooth. When I got to starting up,
> everything appeared to work, until it got to my NIC cards. Neither of
> them loaded properly. I've built in the EXACT same module for the NICs
> as I did the previous kernel. They were the NE2000 PCI module and the
> 3C59X module. The two NICs I have are: Realtek 8029 PCI, 3COM Etherlink
> III ISA. Both are PNP, the etherlink is NOT the one with the b extention
> at the end.
> Any help would be greatly appriciated.
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to email@example.com
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to firstname.lastname@example.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:23 EST