Thanks for the info. I can run the script manually to get the NIC on the
network. But, by the mean time before a permanent fix, would it be a good
idea to apply the change I did to allow at least correct initilization for
> -----Original Message-----
> From: David Hinds [SMTP:firstname.lastname@example.org]
> Sent: Thursday, September 07, 2000 1:43 PM
> To: Claude LeFrancois (LMC)
> Cc: 'email@example.com'; 'firstname.lastname@example.org'
> Subject: Re: PCMCIA: 3CCFE575CT initialization probem under
> On Thu, Sep 07, 2000 at 12:25:41PM -0400, Claude LeFrancois (LMC) wrote:
> > cardmgr: executing: './network start 3c575_cb'
> > cardmgr: + usage: ifup <device name>
> > cardmgr: start cmd exited with status 1
> The new hot plug PCI interface does not provide a method for passing
> the correct device name to cardmgr. There is no fix at this time.
> -- Dave
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to email@example.com
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Sep 07 2000 - 21:00:31 EST