(Cross posting this to the aic7xxx list; it was started on
linux-kernel).
I got my adaptec APA-1480 starting to work under 2.4.0-test1-ac7 using
the patch posted by Garth Reese in the thread "Can't recognize Adaptec
APA-1480 in 2.4.0-test1-ac4".
With the patch applied, the card is recognized and the sequencer code is
downloaded. When I try to mount a drive later, I get the message that
is the subject of this mail.
Looking closer at the boot messages, I get:
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Inquiry 00 00 00 ff 00
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0
later
SCSI bus is being reset for host 0 channel 0
SCSI host 0 reset (pid 0) timed out again -
probably an unrecoverable SCSI bus or device hang
This happens with either an Iomega zip disk or a Yamaha CRW4416 CD-RW
burner attached.
The version given in aic7xxx.c is 5.2.0.
Michael D. Crawford
Goingware Inc. - Expert Software Development and Consulting
http://www.goingware.com
crawford@goingware.com
Tilting at Windmills for a Better Tomorrow.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:14 EST