On Mon, Feb 14 2000, Jeff Garzik wrote:
> > eepro100 does not work well after the 2.3.45 changes. It works after
> > a cold boot, but after a warm reboot no go. The device is detected
> > and eth0 brought up, but I get no response from the other end.
> Can you check and see if this behavior exists in 2.3.45-pre2 also?
Ok, I got and compiled 2.3.45-pre2. It has similar problems --
does not work when the machine is rebooted. 2.3.44 is fine.
> I enabled Becker's ACPI logic in 2.3.45 eepro100, and that sounds like
> it may be the culprit.
-- * Jens Axboe <email@example.com> * Linux CD-ROM Maintainer * http://www.kernel.dk
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Feb 15 2000 - 21:00:26 EST